This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Effect of Aged Oils on Ring-Liner Wear

Journal Article
04-13-02-0010
ISSN: 1946-3952, e-ISSN: 1946-3960
Published July 02, 2020 by SAE International in United States
Effect of Aged Oils on Ring-Liner Wear
Citation: Fernandes, W., Tomanik, E., Moreira, H., Cousseau, T. et al., "Effect of Aged Oils on Ring-Liner Wear," SAE Int. J. Fuels Lubr. 13(2):167-176, 2020, https://doi.org/10.4271/04-13-02-0010.
Language: English

References

  1. Truhan, J. , Qu, J. , and Blau, P. , “A Rig Test to Measure Friction and Wear of Heavy Duty Diesel Engine Piston Rings and Cylinder Liners Using Realistic Lubricants,” Tribol. Int. 38(3):211-218, 2005, https://doi.org/10.1016/j.triboint.2004.08.003.
  2. Truhan, J. , Qu, J. , and Blau, P. , “The Effect of Lubricating Oil Condition on the Friction and Wear of Piston Ring and Cylinder Liner Materials in a Reciprocating Bench Test,” Wear 259(7-12):1048-1055, 2005, https://doi.org/10.1016/j.wear.2005.01.025.
  3. Uy, D. , Simko, S.J. , Carter, R.O. III , Jensen, R.K. et al. , “Characterization of Anti-Wear Films Formed from Fresh and Aged Engine Oils,” Wear 263(7-12):1165-1174, 2007, https://doi.org/10.1016/j.wear.2006.12.026.
  4. De Silva, P.R. , Priest, M. , Lee, P.M. , Coy, R.C. et al. , “Tribometer Investigation of the Frictional Response of Piston Rings When Lubricated with the Separated Phases of Lubricant Contaminated with the Gasoline Engine Biofuel Ethanol and Water,” Tribol. Lett. 43(2):107-120, 2011, https://doi.org/10.1007/s11249-011-9809-3.
  5. Lenauer, C. , Tomastik, C. , Wopelka, T. , and Jech, M. , “Piston Ring Wear and Cylinder Liner Tribofilm in Tribotests with Lubricants Artificially Altered with Ethanol Combustion Products,” Tribol. Int. 82(Part B):415-422, 2015, https://doi.org/10.1016/j.triboint.2014.04.034.
  6. Cen, H. , Morina, A. , and Neville, A. , “Effect of Lubricant Ageing on Lubricants’ Physical and Chemical Properties and Tribological Performance; Part I: Effect of Lubricant Chemistry,” Ind. Lub. Tribol. 70(2):85-392, 2018, https://doi.org/10.1108/ILT-03-2017-0059.
  7. Nikolakopoulos, P. , Mavroudis, S. , and Zavos, A. , “Lubrication Performance of Engine Commercial Oils with Different Performance Levels: The Effect of Engine Synthetic Oil Aging on Piston Ring Tribology under Real Engine Conditions,” Lubricants 6(4):90, 2018, https://doi.org/10.3390/lubricants6040090.
  8. Moon, S.-K. and Kimura, Y. , “Wear Preventing Property of Used Gasoline Engine Oils,” Wear 139:351-365, 1990.
  9. Kawamura, M. , Fujita, K. , and Ninomiya, K. , “The Lubricating Properties of Used Engine Oil,” Wear 77:195-202, 1982.
  10. Inada, K. and Yoshimura, N. , “Trends in Specification of Large Diesel Engine Oils,” Idemitsu Tribo Review 29-2016, 2016.
  11. Rejowski, E.D. , Tomanik, E. , and Souza, J.P. , “Low Viscosity Oils Impact on Heavy Duty Diesel Engine Components,” Blucher Eng. Proc. 3:118-130, 2016.
  12. Dörr, N. , Agocs, A. , Besser, C. , Ristic, A. et al. , “Engine Oils in the Field: A Comprehensive Chemical Assessment of Engine Oil Degradation in a Passenger Car,” Tribol. Lett. 67(3):68, 2019, https://doi.org/10.1007/s11249-019-1182-7.
  13. Tomanik, E. and Nigro, F. , “Piston Ring Pack and Cylinder Wear Modelling,” SAE Technical Paper 2001-01-0572, 2001, https://doi.org/10.4271/2001-01-0572.
  14. Spiller, S. , Lenauer, C. , Wopelka, T. , and Jech, M. , “Real Time Durability of Tribofilms in the Piston Ring-Cylinder Liner Contact,” Tribol. Int. 113:92-100, 2017, https://doi.org/10.1016/j.triboint.2016.12.002.
  15. Vale, J.L. , Silva, C.H. , and Pintaude, G. , “Tribological Performance Assessment of Lamellar and Compacted Graphite Irons in Lubricated Ring-On-Cylinder Test,” Wear 426-427:471-480, 2019.
  16. Obert, P. , Müller, T. , Füßer, H.J. , and Bartel, D. , “The Influence of Oil Supply and Cylinder Liner Temperature on Friction, Wear and Scuffing Behavior of Piston Ring Cylinder Liner Contacts - A New Model Test,” Tribol. Int. 94:306-314, 2016, https://doi.org/10.1016/j.triboint.2015.08.026.
  17. Cousseau, T. , Serbino, E. , Rejowski, E. et al. , “Influence of Steadite on the Tribological Behavior of Cylinder Liners,” Ind. Lubric. Tribol. 71:324-332, 2019.
  18. Tripaldi, G. , Vettor, A. , and Spikes, H. , “Friction Behaviour of ZDDP Films in the Mixed, Boundary/EHD Regime,” SAE Technical Paper 962036 , 1996, https://doi.org/10.4271/962036.
  19. Liu, Y. et al. , “A Comprehensive Study of the Effects of Honing Patterns on Twin-Land Oil Control Rings Friction Using Both a Numerical Model and a Floating Liner Engine,” Proc IMechE Part J: J Eng Tribol 233(2):229-255, 2019.
  20. Cousseau, T. and Passos, G.A. , “Methodology for Wear Mapping Error Quantification,” Industrial Lubrication and Tribology, 2020.
  21. Pawlus, P. , “Change of Cylinder Surface Topography in the Initial Stage of Engine Life,” Wear 209(1-2):69-83, 1997, https://doi.org/10.1016/S0043-1648(97)00007-0.
  22. Corral, I. , Calvet, J. , and Salcedo, M. , “Use of Roughness Probability Parameters to Quantify the Material Removed in Plateau-Honing,” Int. J. Machine Tools Manuf. 50(7):621-629, 2010, https://doi.org/10.1016/j.ijmachtools.2010.02.007.
  23. Rubach, S. , Riemer, T. , Valentin, J. , and Delto, C. , “Wear Detection on Cylinder Liners with Optical 3D Measuring Technology,” MTZ Worldw. 75(3):38-43, 2014, https://doi.org/10.1007/s38313-014-0032-0.
  24. Obara, R.B. and Sinatora, A. , “Quantification of Cylinder Bores Almost ‘Zero-Wear’,” Wear 364-365:224-232, 2016, https://doi.org/10.1016/j.wear.2016.08.002.
  25. Tertuliano, I.S. , Figueiredo, T.P. , Machado, G.A.A. et al. , “The Effects of Surface Conditioning and Gear Oil Type on Friction and Wear Behavior under Sliding Condition,” Proc. IMechE, Part J: J. Eng. Tribol. 232:73-84, 2018.
  26. Bouchet, M.D.B. , Martin, J.M. , Le Mogne, T. , Bilas, P. et al. , “Mechanisms of MoS2 Formation by MoDTC in Presence of ZnDTP: Effect of Oxidative Degradation,” Wear 258(11-12):1643-1650, 2005, https://doi.org/10.1016/j.wear.2004.11.019.
  27. Ji, H. , Nicholls, M.A. , Norton, P.R. , Kasrai, M. et al. , “Zinc-Dialkyl-Dithiophosphate Antiwear Films: Dependence on Contact Pressure and Sliding Speed,” Wear 258(5-6):789-799, 2005, https://doi.org/10.1016/j.wear.2004.09.070.
  28. Taylor, L.J. and Spikes, H.A. , “Friction-Enhancing Properties of ZDDP Antiwear Additive: Part I-Friction and Morphology of ZDDP Reaction Films,” Tribol. Trans. 46(3):303-309, 2003, https://doi.org/10.1080/10402000308982630.
  29. Gangopadhyay, A. , Carter, R. , Uy, D. , Simko, S. et al. , “The Effect of Oil Drain Interval on Valvetrain Friction and Wear,” SAE Technical Paper 2007-01-4133, 2007, https://doi.org/10.4271/2007-01-4133.
  30. Gangopadhyay, A. et al. , “Valvetrain Friction and Wear with Fresh and Used Low Phosphorous Engine Oils,” Tribology Transactions 50(3):350-360, 2007.

Cited By