The SAE MOBILUS platform will continue to be accessible and populated with high quality technical content during the coronavirus (COVID-19) pandemic. x
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Development of a Measuring System for the Visualization of the Oil Film between the Piston and Cylinder Liner of a Gasoline Engine

  • Journal Article
  • 03-13-02-0013
  • ISSN: 1946-3936, e-ISSN: 1946-3944
Published November 14, 2019 by SAE International in United States
Development of a Measuring System for the Visualization of the Oil Film between the Piston and Cylinder Liner of a Gasoline Engine
Sector:
Citation: Schäffer, J., Kirner, C., Härtl, M., and Wachtmeister, G., "Development of a Measuring System for the Visualization of the Oil Film between the Piston and Cylinder Liner of a Gasoline Engine," SAE Int. J. Engines 13(2):2020.
Language: English

References

  1. Holmberg, K., Andersson, P., and Erdemir, A. , “Global Energy Consumption due to Friction in Passenger Cars,” Tribology International 47:221-234, 2012.
  2. Tung, S.C. and McMillan, M.L. , “Automotive Tribology Overview of Current Advances and Challenges for the Future,” Tribology International 37:517-536, 2004.
  3. Werner, M.K. , “Entwicklung eines Motorprüfstands zur Untersuchung der Kolbengruppenreibung und deren Haupt-einflussgrößen,” Dissertation am Lehrstuhl für Verbrennungs-kraftmaschinen der Technischen Universität München, München, 2014.
  4. Merkle, A.A. , “Maßnahmen zur Reduzierung der CO2-Emissionen von Verbrennungsmotoren durch Reibungs-optimierung des tribologischen Systems Kolbengruppe,” Dissertation am Lehrstuhl für Verbrennungskraftmaschinen der Technischen Universität München, München, 2015.
  5. Yilmaz, E. , “Sources and Characteristics of Oil Consumption in a Spark-Ignition Engine,” Master's thesis am Department of Mechanical Engineering des Massachusetts Institute of Technology, Cambridge, 2003.
  6. Yilmaz, E., Tian, T., Wong, V.W., and Heywood, J.B. , “The Contribution of Different Oil Consumption Sources to Total Oil Consumption in a Spark Ignition Engine,” SAE Technical Paper 2004-01-2909, 2004, doi:10.4321/2004-01-2909.
  7. Grice, N. and Sherrington, I. , “An Experimental Investigation into the Lubrication of Piston Rings in an Internal Combustion Engine - Oil Film Thickness Trends, Film Stability and Cavitation,” SAE Technical Paper 930688 , 1993, doi:10.4321/930688.
  8. Ducu, D.O., Donahue, R.J., and Ghandhi, J.B. , “Design of Capacitance Probes for Oil Film Thickness Measurements between the Piston Ring and Liner in Internal Combustion Engines,” Journal of Engineering for Gas Turbines and Power 123(3):633-643, 2001.
  9. Tamminen, J., Sandström, C.-E., and Andersson, P. , “Influence of Load on the Tribological Conditions in Piston Ring and Cylinder Liner Contacts in a Medium-Speed Diesel Engine,” Tribology International 39(12):1643-1652, 2006.
  10. Dhar, A., Agarwal, A.K., and Saxena, V. , “Measurement of Dynamic Lubricating Oil Film Thickness between Piston Ring and Liner in a Motored Engine,” Sensors and Actuators A 149(1):7-15, 2008.
  11. Dwyer-Joyce, R.S., Green, D.A., Balakrishnan, S., Harper, P. et al. , “The Measurement of Liner-Piston Skirt Oil Film Thickness by an Ultrasonic Means,” SAE Technical Paper 2006-01-0648, 2006, doi:10.4321/2006-01-0648.
  12. Avan, E., Mills, R., and Dwyer-Joyce, R. , “Ultrasonic Imaging of the Piston Ring Oil Film During Operation in a Motored Engine - Towards Oil Film Thickness Measurement,” SAE Int. J. Fuels Lubr. 3(2):786-793, 2010, doi:10.4271/2010-01-2179.
  13. Mills, R.S. and Dwyer-Joyce, R.S. , “Ultrasound for the Non-Invasive Measurement of IC Engine Piston Skirt Lubricant Films,” Proceedings of the IMechE Part J: Journal of Engineering Tribology 228(11):1330-1340, 2014.
  14. Mills, R.S., Vail, J.R., and Dwyer-Joyce, R.S. , “Ultrasound for the Non-Invasive Measurement of Internal Combustion Engine Piston Ring Oil Films,” Proceedings of the IMechE Part J: Journal of Engineering Tribology 229(2):207-215, 2014.
  15. Shaw, B.T., Hoult, D.P., and Wong, V.W. , “Development of Engine Lubricant Film Thickness Diagnostics Using Fiber Optics and Laser Fluorescence,” SAE Technical Paper 920651, 1992, doi:10.4321/920651.
  16. Casey, S.M., Tamai, G., and Wong, V.W. , “Effects of Engine Operating Conditions on Oil Film Thickness and Distribution along the Piston/Ring/Liner Interface in a Reciprocating Engine,” in Fall Technical Conference ASME 1998, Clymer, NY, 1998.
  17. Takiguchi, M., Sasaki, R., Takahashi, I., Ishibashi, F. et al. , “Oil Film Thickness Measurement and Analysis of a Three Ring Pack in an Operating Diesel Engine,” SAE Technical Paper 2000-01-1787, 2000, doi:10.4321/2000-01-1787.
  18. Kirner, C., Uhlig, B., Behn, A., and Feindt, M. , “Kolbenring-Öltransport 1,” in Forschungsvereinigung Verbrennungs-kraftmaschinen e. V., Tagungsbericht zum Vorhaben Nr. 1124, Frankfurt am Main, 2015.
  19. Uhlig, B., Kirner, C., Behn, A., and Feindt, M. , “Investigation of the Lubricating Oil Management on the Piston Assembly,” MTZ Worldwide 77(4):62-69, 2016.
  20. Uhlig, B., Kirner, C., Preuß, A.-C., Graf, J. et al. , “Kolbenring-Öltransport 2,” in Forschungsvereinigung Verbrennungskraftmaschinen e. V., Tagungsbericht zum Vorhaben Nr. 1197, Magdeburg, 2016.
  21. Inagaki, H., Saito, A., Murakami, M., and Konomi, T. , “Development of Two-Dimensional Oil Film Thickness Distribution Measuring System,” SAE Technical Paper 952346, 1995, doi:10.4321/952346.
  22. Thirouard, B. , “Characterization and Modeling of the Fundamental Aspects of Oil Transport in the Piston Ring Pack of Internal Combustion Engines,” Dissertation am Department of Mechanical Engineering des Massachusetts Institute of Technology, Cambridge, 2001.
  23. Thirouard, B. and Tian, T. , “Oil Transport in the Piston Ring Pack (Part I): Identification and Characterization of the Main Oil Transport Routes and Mechanisms,” SAE Technical Paper 2003-01-1952, 2003, doi:10.4321/2003-01-1952.
  24. Thirouard, B. and Tian, T. , “Oil Transport in the Piston Ring Pack (Part II): Zone Analysis and Macro Oil Transport Model,” SAE Technical Paper 2003-01-1953, 2003, doi:10.4321/2003-01-1953.
  25. Vokac, A. and Tian, T. , “An Experimental Study of Oil Transport on the Piston Third Land and the Effects of Piston and Ring Designs,” SAE Technical Paper 2004-01-1934, 2004, doi:10.4321/2004-01-1934.
  26. Przesmitzki, S. and Tian, T. , “Oil Transport inside the Power Cylinder during Transient Load Changes,” SAE Technical Paper 2007-01-1054, 2007, doi:10.4321/2007-01-1054.
  27. Przesmitzki, S. , “Characterization of Oil Transport in the Power Cylinder of Internal Combustion Engines during Steady State and Transient Operation,” Dissertation am Department of Mechanical Engineering des Massachusetts Institute of Technology, Cambridge, 2008.
  28. Senzer, E.B. , “Oil Transport inside the Oil Control Ring Grove and Its Interaction with Surrounding Areas in Internal Combustion Engines,” Dissertation am Department of Mechanical Engineering des Massachusetts Institute of Technology, Cambridge, 2012.
  29. Zanghi, E. and Tian, T. , “Development of a High Speed Laser Induced Fluorescence (HSLIF) System in a Single Cylinder Engine for Oil Transport Studies,” SAE Technical Paper 2016-01-0642, 2016, doi:10.4321/2016-01-0642.
  30. Wigger, S. , “Charakterisierung von Öl- und Kraftstoffschichten in der Kolbengruppe mittels laserinduzierter Fluoreszenz,” Dissertation in der Abteilung Maschinenbau und Verfahrens-technik der Universität Duisburg-Essen, Duisburg, 2014.
  31. Müller, T., Wigger, S., Füßer, H.-J., and Kaiser, S. , “Optische Untersuchung der Schmierungsverhältnisse im Reibkontakt Kolbenhemd/Zylinderlaufbahn mittels laserinduzierter Fluoreszenz an einem optisch zugänglichen Einzylindermotor,” Gesellschaft für Tribologie e. V., 57. Tribologie-Fachtagung, Göttingen, 2016.
  32. Wigger, S., Müller, T., Füßer, H.-J., and Kaiser, S. , “Visualization of Fuel Wall Wetting, Oil Dilution by Fuel, and Oil Transport Mechanisms in an Optically Accessible Engine by LIF Imaging,” . In: Knocking in Gasoline Engines. (Berlin, Springer, 2018), 189-202.
  33. Dellis, P. and Arcoumanis, C. , “Cavitation Development in the Lubricant Film of a Reciprocating Piston-Ring Assembly,” Proceedings of the IMechE Part J: Engineering Tribology 218(3):157-171, 2004.
  34. Dellis, P. , “Aspects of Lubrication in Piston Cylinder Assemblies,” Doctoral thesis at the Imperial College of London, London, 2005.
  35. Dellis, P. and Arcoumanis, C. , “Measurement of Oil Film Thickness in Reciprocating Rigs and Piston Assemblies,” Journal of Physics: Conference Series 45(1):161, 2006.
  36. Dellis, P. , “Aspects of Lubrication in a Reciprocating Single-Ring Test Rig and Further Implementation to Engine Applications,” Tribology in Industry 39(2):260-269, 2017.
  37. Ohsawa, K., Kiyama, S., Nakamura, Y., Ochiai, Y. et al. , “Visualization Study on Lubricant Oil Film Behavior around Piston Skirt,” SAE Technical Paper 2011-01-2119, 2011, doi:10.4321/2011-01-2119.
  38. Pishchik, V., Lytvynov, L.A., and Dobrovinskaya, E.R. , Sapphire: Material, Manufacturing, Applications (Boston: Springer US, 2009).
  39. Schatt, W., Simmchen, E., and Zouhar, G. , Konstruktions-werkstoffe des Maschinen- und Anlagenbaues (Stuttgart: Deutscher Verlag für Grundstoffindustrie, 1998).
  40. CeramTec - ETEC GmbH , “Perlucor - A New Era in Transparency,” [Online]. Available: https://www.ceramtec.de/downloads/tag/perlucor (accessed 2018).

Cited By