Your Selections

TEVHBASS4
Show Only

Collections

File Formats

Content Types

Dates

Sectors

Topics

Publishers

Committees

Committee Codes

High-Temperature Power Steering Pressure Hose

Automotive Brake and Steering Hose Standards Comm
  • Ground Vehicle Standard
  • J2050_201509
  • Current
Published 2015-09-03 by SAE International in United States
This SAE Standard covers two types of hose fabricated from textile reinforcement and synthetic rubber, assembled with end fittings for use in high-temperature automotive power steering applications as flexible connections within the temperature range of −40 to +150 °C (−40 to +302 °F) maximum and 10.3 MPa (1500 psi) maximum working pressure. These hoses are intended for use in applications where reduction in amplitude of pump pressure pulsation is required. Class A hose has a nominal OD of 19.84 mm (0.781 in). Class B hose is a lightweight hose with a nominal OD of 17.91 mm (0.705 in). This specification defines the minimum performance levels of a flexible connector in the hydraulic steering system to convey power steering fluid from the steering pump to the steering gear.
Datasets icon
Annotation icon

Vacuum Brake Hose

Automotive Brake and Steering Hose Standards Comm
  • Ground Vehicle Standard
  • J1403_201409
  • Current
Published 2014-09-18 by SAE International in United States
The vacuum brake hose is intended for use in the power braking systems of vehicles or as connections on vacuum lines of vehicles or systems thereof. For the purposes of clearly identifying hose classification and for specification simplification, vacuum brake hose is divided into two types: heavy-wall Type H, and light-wall Type L.
Datasets icon
Annotation icon

Power Steering Pressure Hose - Low Volumetric Expansion Type

Automotive Brake and Steering Hose Standards Comm
  • Ground Vehicle Standard
  • J191_201409
  • Current
Published 2014-09-09 by SAE International in United States
This SAE Standard covers hose fabricated from fabric braid and synthetic rubber, assembled with end fittings for use in automotive power steering applications at pressures as indicated in Table 1B, as flexible connections within the temperature range of -40 °C (-40 °F) to 121°C (250 °F) average, 135 °C (275 °F) maximum peaks. These hoses are intended for use in applications where reduction in amplitude of pump pressure pulsations is not required.
Datasets icon
Annotation icon

Road Vehicle - Hydraulic Brake Hose Assemblies for Use With Nonpetroleum-Base Hydraulic Fluids

Automotive Brake and Steering Hose Standards Comm
  • Ground Vehicle Standard
  • J1401_201302
  • Current
Published 2013-02-05 by SAE International in United States
This SAE Standard specifies the performance tests and requirements for hydraulic brake hose assemblies used in the hydraulic braking system of a road vehicle. It also specifies the methods used for identification of the hose manufacturer. This document applies to brake hose assemblies made of a hose fabricated from yarn and natural or synthetic elastomers and assembled with metal end fittings for use with nonpetroleum-base brake fluids as specified in SAE J1703, SAE J1704 and SAE J1705. The nominal internal diameter of the brake hose shall fall within one of the following values: a less than 4 mm (1/8 in or less) b 4 to 5 mm (3/16 in)
Datasets icon
Annotation icon

Packaging, Storage, and Shelf Life of Hydraulic Brake Hose Assemblies

Automotive Brake and Steering Hose Standards Comm
  • Ground Vehicle Standard
  • J1288_201207
  • Current
Published 2012-07-05 by SAE International in United States
This SAE Information Report is the listing of recommendations for the proper packaging, storage, and shelf life limitations of new and unused hydraulic brake hose assemblies. The document embodies the testing, analysis, and experience of many users and manufacturers. Where specific manufacturer's recommendations are made, those recommendations shall supersede the recommendations of this document. This document describes the successful procedures and practices associated with brake hose assemblies usage by a wide cross section of manufacturers and users over several years. The practices are expected to be applicable to all brake hose assemblies which qualify under SAE J1401.
Annotation icon

Power Steering Return Hose - Low Pressure

Automotive Brake and Steering Hose Standards Comm
  • Ground Vehicle Standard
  • J189_201207
  • Current
Published 2012-07-05 by SAE International in United States
This SAE Standard covers hose fabricated from fabric braid and synthetic rubber, assembled with end fittings or user applied clamps for use in automotive power steering applications as flexible connections within the temperature range of -40 °C to +120 °C (-40 °F to 250 °F) average and 135 °C (275 °F) maximum peaks. Hose assemblies shall be suitable for 1.72 MPa (250 psi) maximum working pressure with end fittings and 0.69 MPa (100 psi) maximum working pressure with user applied clamps.
Datasets icon
Annotation icon

Power Steering Pressure Hose - High Volumetric Expansion Type

Automotive Brake and Steering Hose Standards Comm
  • Ground Vehicle Standard
  • J188_201207
  • Current
Published 2012-07-05 by SAE International in United States
This document covers two types of hose fabricated from fabric braid and synthetic rubber, assembled with end fittings for use in automotive power steering applications as flexible connections within the temperature range of -40 °C to +120 °C (-40 °F to +250 °F) average, and 135 °C (275 °F) maximum peaks. These hoses are intended for use in applications where reduction in amplitude of pump pressure pulsations is required. Type 1 hose shall be suitable for 10.3 MPa (1500 psi) maximum working pressure. Type 2 hose shall be suitable for 10.3 MPa (1500 psi) maximum working pressure.
Datasets icon
Annotation icon

Automotive Hydraulic Brake System - Metric Tube Connections

Automotive Brake and Steering Hose Standards Comm
  • Ground Vehicle Standard
  • J1290_201207
  • Current
Published 2012-07-05 by SAE International in United States
This SAE Standard documents dimensional metric specifications for hydraulic brake system tubing with flared ends, threaded ports, and male tube nuts for the interconnection of major components in automotive hydraulic brake systems. The purpose of this document is to recommend preferred metrically dimensioned components (including alternative choices), that are intended to be functionally compatible with International Organization for Standardization Specification, ISO 4038. Some applications may require sizes of forms other than those shown herein, and this document does not preclude such other details when they are required.
Datasets icon
Annotation icon

High-Temperature Power Steering Pressure Hose

Automotive Brake and Steering Hose Standards Comm
  • Ground Vehicle Standard
  • J2050_201207
  • Historical
Published 2012-07-05 by SAE International in United States
This SAE Standard covers two types of hose fabricated from textile reinforcement and synthetic rubber, assembled with end fittings for use in high-temperature automotive power steering applications as flexible connections within the temperature range of -40 to +150 °C (-40 to +302 °F) maximum and 10.3 MPa (1500 psi) maximum working pressure. These hoses are intended for use in applications where reduction in amplitude of pump pressure pulsation is required. Class A hose has a nominal OD of 19.84 mm (0.781 in). Class B hose is a lightweight hose with a nominal OD of 17.91 mm (0.705 in). This specification defines the minimum performance levels of a flexible connector in the hydraulic steering system to convey power steering fluid from the steering pump to the steering gear.

Power Steering Pressure Hose - Wire Braid

Automotive Brake and Steering Hose Standards Comm
  • Ground Vehicle Standard
  • J190_201207
  • Current
Published 2012-07-05 by SAE International in United States
This specification covers hose fabricated from wire braid and synthetic rubber, assembled with end fittings for use in automotive applications up to 10.3 MPa (1500 psi) maximum pressure, as flexible connections within the temperature range of -40 °C to 121 °C (-40 °F to +250 °F) average, 13.5 °C (275 °F) maximum peaks. The specification in this SAE Standard originated in the SAE-ASTM Technical Committee on Automotive Rubber (other than tires). They represent the correlation of the best information available from research investigation and production experience on the minimum constructional and performance characteristics essential for new power steering assemblies used as original or replacement equipment. This standard applies to passenger cars. It may prove useful to truck manufacturers, but it is not to be presented as present practices. They also represent the minimum quality recognized by original equipment manufacturers and hose suppliers as essential for satisfactory and safe operation by the hose itself and other coacting parts of the power steering system. The original equipment manufacturer may, at his option, add or alter tests through…
Datasets icon
Annotation icon