This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Polytetrafluoroethylene (PTFE) Moldings General Purpose Grade, As Sintered
- Aerospace Material Specification
- AMS3660C
- Reaffirmed
Downloadable datasets available
Annotation ability available
Sector:
Issuing Committee:
Language:
English
Scope
This specification covers virgin, unfilled polytetrafluoroethylene (PTFE) in the form of molded rods, tubes, and shapes. This specification does not apply to product over 12 inches (305 mm) in dimension parallel to the direction of applied molding pressure, rods under 0.750 inch (19.05 mm) in diameter, and tubes having wall thickness under 0.500 inch (12.70 mm).
Recommended Content
| Aerospace Material Specification | Polytetrafluoroethylene (PTFE) Sheet, Molded General Purpose Grade, As Sintered |
| Aerospace Material Specification | Polychlorotrifluoroethylene (PCTFE), Compression Molded Heavy Sections, Unplasticized |
| Aerospace Material Specification | Polyamide Type 6-6, Plastic Moldings and Extrusions |
Topic
Data Sets - Support Documents
| Title | Description | Download |
|---|---|---|
| Unnamed Dataset 1 | ||
| Unnamed Dataset 2 | ||
| TABLE 1 | Properties | |
| TABLE 2A | Diameter Tolerances, Inch/Pound Units | |
| TABLE 2B | Diameter Tolerances, SI Units | |
| TABLE 3A | Diameter Tolerances, Inch/Pound Units | |
| TABLE 3B | Diameter Tolerances, SI Units | |
| TABLE 4A | Maximum Out of Roundness Tolerances, Inch/Pound Units | |
| TABLE 4B | Maximum Out of Roundness Tolerances, SI Units |
Issuing Committee
AMS P Polymeric Materials Committee
Welcome to the AMS-P Polymeric & Composites Materials Committee discussion forum.
The AMS-P Polymeric Materials Committee writes and revises Aerospace Material Specifications (AMS), Metric Aerospace Materials Specifications (MAM), Aerospace Recommended Practices (ARP), and Aerospace Information Reports (AIR) for composite material technology as assigned to the committee. No copyrighted material may be posted in this forum. SAE is not liable for opinions expressed or information posted to this forum. All information posted becomes the property of SAE.Reference
| Number | Title |
|---|---|
| ASTMD149 | This document is not part of the subscrption. |
| ASTMD1708 | This document is not part of the subscrption. |
| ASTMD638 | This document is not part of the subscrption. |
| ASTMD683M | This document is not part of the subscrption. |
| ASTMD792 | This document is not part of the subscrption. |
| MIL-STD-2073-1 | This document is not part of the subscrption. |
* Redlines comparisons are available for those standards
listed in the Revision History that contain a radio button. A
redline comparison of the current version against a revision is
accomplished by selecting the radio button next to the standard and
then selecting 'compare'. At this time, Redline versions only exist
for some AMS standards. SAE will continue to add redline versioning
with ongoing updates to SAE MOBILUS.