This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Ram Air Heat Exchangers for Very High-Altitude Subsonic Aircraft
Annotation ability available
Sector:
Language:
English
Abstract
For global environmental research it is essential to provide scientists with a tool to perform in-situ studies of our stratosphere; such a tool is a high-altitude subsonic aircraft capable of climbing into the layers of ozone at 25 kilometres and higher.
This paper describes the design and development of ram air heat exchangers for the Perseus high-altitude unmanned scientific research aircraft, designed to carry a 50 kg payload to 25 km. The powerplant of the Perseus aircraft consists of a closed-cycle internal combustion engine, where the exhaust gas is cooled and fed back into the engine as the diluent. Thus, manifold pressure can be kept at a desired level, independent of atmospheric conditions. The aircraft carries its fuel and liquid oxygen as reactants.
Cooling systems are required for the thermal balance of this powerplant. The recirculated exhaust gas requires a cooler for temperatures up to 1100 Kelvin. Also needed are heat exchangers for the glycol-water mix used for the cylinder head cooling and for the lubrication oil of the engine. Computational models have been developed and used to optimise the heat exchangers and to predict heat transfer, aerodynamic performance and weights. General results are shown for the design of optimum aircraft ram air coolers as a function of atmospheric conditions and flight Mach number. Examples of optimum duct designs are discussed and presented.
Recommended Content
Authors
Topic
Citation
Russ, B. and Drela, M., "Ram Air Heat Exchangers for Very High-Altitude Subsonic Aircraft," SAE Technical Paper 931145, 1993, https://doi.org/10.4271/931145.Also In
References
- Drela Mark Giles M.B. “Viscous-inviscid analysis of transonic and low Reynolds number airfoils” AIAA Journal 25 10 October 1987
- Kakac S. Shah R.K. Bergles A.E. “Low Reynolds Number Flow Heat Exchangers” Hemisphere Publishing Company 0-89116-254-2 Springer-Verlag 3-540-12203-6
- Preston Charles S. Hendrickson Stephen P. Langford John S. “A closed Cycle, High-Altitude Rotary Engine for Unmanned Ozone Sampler” SAE Technical Paper 921548 1992
- Russ Benjamin “Thermodynamic Evaluation and Optimisation of Fuel Cell Powerplants for High-altitude, Long Duration Aircraft” Master Thesis Aerospace Engineering University of Stuttgart, Germany 1991
- Kays William M. London A.L. “Compact Heat Exchangers” Mc Graw Hill 1984 0-07-033418-8
- Drela M. “Low-Reynolds-Number Airfoil Design for the M.I.T. Daedalus Prototype: A Case Study” AIAA Journal 25 8 August 1988
- Beamer Hank Trost Kelly Heat Exchanger Simulation Calculations GM Harrison Division Lockport, NY 1992
- Coleman Kenneth Kosson Robert Grumman Aircraft Systems Division “Analytical Methods to Predict Liquid Congealing in Ram Air Heat Exchangers During Cold Opertaion” SAE Technical Paper 891439 1989
- Pouliot Christopher Glenn Chris Drela Mark “Aerodynamic Analysis of the Lower Heat Exchanger of the Perseus Aircraft” M.I.T. Wind Tunnel Study Final Report 1992
- Hughes Greg Modine Manufacturing Company Experimental heat exchanger core data