This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Transverse Permeability Measurements Through Stacked Glass Fiber Mats
Annotation ability available
Sector:
Language:
English
Abstract
The effect of compaction and fiber volume fraction on the transverse permeability of a fluid flowing through stacked layers of fiber mats has been experimentally studied. A Unifilo-101 random mat of continuous glass strands, held together with a binder soluble in styrene was used. The stacked layers were compacted using a Wabash instrumented press. Changing the maximum load, resulted in different fiber volume fractions. Mixtures of glycerol and water with viscosities between 85 and 100 mPa-s were used. This fluid is passed in a rectangular cell, through the fibers arranged transverse to the direction of flow. The pressure drop across the mat and the flow rate were monitored. The study was carried out at different flow rates of the fluid and was repeated for other fiber volume fractions. A power-law relation was observed between the permeability and the fiber volume fraction. The linear portion of the pressure drop vs flow rate curve (low flow rates) was used to evaluate the transverse permeability. The non-linear portion corresponds to compaction of the preform. It has been found that the permeability can be related to the fiber volume fraction by a power-law expression. The Karman-Cozeny equation was found to be inadequate for representing the experimental results. Another observation was that the departure from the linear portion, was found to occur at nearly the same pressure gradient, for two different fiber volume fractions.
Citation
Mishra, S. and Jayaraman, K., "Transverse Permeability Measurements Through Stacked Glass Fiber Mats," SAE Technical Paper 930174, 1993, https://doi.org/10.4271/930174.Also In
References
- Berdichevsky A.L Cai Z. “Prediction of permeability of fibrous media using self-consistent method” Paper presented at the Symposium on Science & Innovation in Polymer Composites Processing M.I.T. July 1992
- Kim Y.R. McCarthy S.P. Fanucci J.P. Nolet S.C. Koppernaes C. “Resin flow through fiber reinforcements during composite processing” SAMPE Quarterly April 1991 16 22
- Molnar J.A. Trevino L. Lee L.J. “Liquid flow in molds with prelocated fiber mats” Polymer Composites 10 6 1989 414 423
- Morse C.T. Ochoa O.O Barron J.H. Barron D.L. “Optimization of SRIM Automotive bumper beams through permeability and wet-out characterizations” 8th Annual ASM/ESD Advanced Composite Conference Chicago Nov. 1992
- Sangani A.S Yao C. “Transport processes in random arrangement of cylinders.II.Viscous flow” Phys. Fluids 31 9 1988 2435 2444
- Skartsis L. Kardos J.L. Khomami B. “Resin flow through fiber beds during composite manufacturing processes” Poly. Eng. Sci. 32 4 1992 221 230
- Trevino L. Rupel K. Young W.B. Liou M.J. Lee L.J. Polym Compos. 12 1 1991 20 29