This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
New Materials for Automotive Pistons
Annotation ability available
Sector:
Event:
SAE Brasil
Language:
English
Abstract
The methodology for the search for new materials for automotive pistons is presented. It led to the ascertain of the manufacturing feasibility of two materials with forecasted medium-term availability and competitive cost. Some manufacturing features as well as materials and pistons bench tests results are presented. This on going research determined that a rapidly solidified alloy has the best potential trade-off between piston cost and engine benefit.
Authors
Topic
Citation
Sarabanda, J., Rosas, E., and Lorente, G., "New Materials for Automotive Pistons," SAE Technical Paper 921449, 1992, https://doi.org/10.4271/921449.Also In
References
- Benito L.N. El-Naggar M.M. Mahrus D. 33 240 Nov. 1977 677
- Filho S.C. “Passenger Car Pistons” Proc. of 2nd Metal Leve Symp. on Piston Technology 5 1990
- Sarabanda J.V. “Technological Properties I - Wear Resistance of Al-Si Alloys” Proc. of 2nd Metal Leve Symp. on Piston Technology 5 1990
- Maly R.R. Klein R. et al. “Theoretical and Experimental Investigation of Knock Induced Surface Destruction SAE Paper 900025 Feb. 1990
- Boehm G. Harrer J. “Nickel Coated Pistons for Improved Durability in Knock Control Engines” SAE Paper 900453 Feb. 1990
- Sarabanda J.V. Muller M. Filho S.C. “Technological Properties II - Erosion Damage of Al-Si Alloys” Proc. of 2nd Metal Leve Symp. on Piston Technology 5 1990
- Muller M. Sarabanda J.V. “Erosion Damage Mechanism on Engine Piston Alloys”
- Schroder J. Kainer K.U. “Effect of Production Technique and Reinforcements on the Microstructure and Properties of Magnesium Matrix Composites” Proc. Int. Conference on Light Metals 1990 847
- Guldberg S. Westengen H. Tellesboe H. Proc. Int. Conference on Light Metals 1990 855
- Wilks T.E. “The Development of a Cost-Effective Particulate Reinforced Magnesium Composite” SAE Paper 920457 Feb. 1992
- Lloyd D.J. Chamberlain B. “Properties of Shape Cast Al-SiC Metal Matrix Composites” Proc. of Cast Reinforced Metal Composites Conference Sept. 1988 263
- Jin I. Lloyd D.J. “Solidification Processing of Particulate Reinforced Aluminum Matrix Composites” Proc. of Metal Matrix Composites in the Automotive Industry May 1990
- Hoover W.R. “Recent Advances in Castable Metal Matrix Composites” Proc. of Metal Matrix Composites in the Automotive Industry May 1990
- Composite Casting Guidelines May 1989
- Wickberg A. Gustafsson G. Larsson L.E. “Microstructural Effects on the Fatigue Properties of a Cast Al17SiMg Alloy” SAE Paper 840121 Feb. 1984
- Griffith W.M. Sanders. R.E. Jr Hildeman G.J. “Elevated Temperature Aluminum Alloys for Aerospace Applications” Proc. of High-Strength P/M Aluminum Alloys Symp. 1982 209
- Couper M.S. Singer R.F. “Influence of Cooling Rate on Microstructure and Mechanical Properties of Rapidly Solidified Al-Fe-X Alloys” Proc. of High-Strength P/M Aluminum Alloys Symp. 1985
- Zindel L.W. Stanley J.T. et al. “Rapid Solidification and Subsequent Analysis of Some Hypereutectic Aluminum-Based Alloys” Proc. of Rapidly Solidified Powder Aluminum Alloys Symp. April 1984 186
- Skinner D.J. “The Physical Metallurgy of Dispersion Strengthened Al-Fe-V-Si Alloys” Proc. Symp. on Dispersion Strengthened Aluminum Alloys 1988 181
- Hirano T. Ohmi F. et al. “Development of Al-Si-X P/M Alloys Using Rapidly Solidified Powders” Proc. of Int. Conf. on Rapidly Solid. Mat. 1986 327
- Odani Y. Akechi K. Kuroishi N. “High Strength and High Wear Resistance Aluminum-Silicon P/M Alloys” Proc. of P/M Conference 1984 493
- Takeda Y. Hayashi T. et al. “Hot Forgeability of Hot Extruded P/M Al-Si-Fe-X Alloys” Modern Developments in Powder Metallurgy 19 1988 533
- Leatham A.G. Brooks R.G. Yaman M. “The Osprey Process for the Production of Spray-Deposited Roll, Disc. Tube and Billet Preforms” Modern Developments in Powder Metallurgy 15-17 1985 157
- Apelian D. Gillen G. Leatham A. “Near Net Shape Manufacturing Via the Osprey Process” Proc. of Conference on Processing of Structural Metals by Rapid Solidification Oct. 1986
- Leatham A.G. Ogilvy A.J.W. et al. “The Production of Advanced Materials by Means of the Osprey Process” Modern Developments in Powder Metallurgy 19 1988 475
- Duszczyk J. Estrada J.L. et al. “The Osprey Preform Process and its Application to Aluminum Alloys Including Wear and High Temperature Resistance Al-20Si-Cu Alloys” Modern Developments in Powder Metallurgy 19 1988 441
- Hehmann F. Bienvenu Y. et al. “Comparison of Processing Atomized and Spray-Deposited Al-20Si-5Fe-2Ni Aimed at Automotive Applications” Proc. of World Conference on Powder Metallurgy July 1990 216 The Institute of Metals
- Nieh T.G. Karlak R. “Aging Characteristics of SiC - Reinforced 6061 Aluminum” Scripta Metallurgica 18 25 1984
- Christman T. Suresh S. “Microstructural Development in an Aluminum Alloy - SiC Whisker Composite” Acta Metallurgica 36 1691 1988
- Suresh S. Christman T. Sugimura Y. “Accelerated Aging in Cast Al Alloy-SiC Particulated Composites” Scripta Metallurgica 23 1599 1989
- Hammond D.E. “A Heat Treatment Study on Cast Metal Matrix Composites” AFS Transactions 178 887 1989
- Composite Casting Guidelines Oct. 1990
- Lagace H. Lloyd D.J. “Microstructural Analysis of Al-SiC Composites” Canadian Metallurgical Quartely 28 145 1989
- Rogers D. B. “Gasoline and Diesel Piston Applications for Metal Matrix Composites” Proc. of Metal Matrix Composites in the Automotive Industry May 1990
- Zhon J. Duszczyk J. “Effect of Extrusion Conditions on the Microstructure and Mechanical Properties of an Al-Si-Fe Alloy Produced by the Osprey Process” Proc. of Hot Deformation of Aluminum Alloys Symp. 1991 473
- Metal Leve Materials Catalogue
- Metals Handbook 2 9th
- Hummert K. Arnhold V. et al. “Comparison of Aluminum Alloys Produced Via Different Routes: Spray Compaction versus P/M” Proc. of Powder Metallurgy World Congress June 1992