This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Improvement of Diesel Engine Performance Through Fuel-injection Equipment Optimization
Annotation ability available
Sector:
Language:
English
Abstract
A method of calculation is proposed that allows, on the basis of cause-and-sequence approach, to improve the main quantitative characteristics of diesel engines by means of optimization of fuel injection conditions and finding out parameters of fuel injection equipment (TA) for their realization. When using the method, it is assumed that certain technical requirements and limits are to be observed (for instance, the maximum combustion pressure, engine noise, emission standards etc.). The two stages of the method are reflecting the natural sequence of TA design.
Components of a developed mathematical model are described in this paper. In particular, special attention is paid to an original phenomenological model of a dispersed fuel spray on the basis of experimental data pertaining to its structure and mixture formation mechanism.
This method has already shown its effectiveness for different practical tasks of minimizing fuel consumption of a diesel engine with known design and setting parameters. Some results are given of real calculations for diesel engines with different dimensions and supercharging rate.
Topic
Citation
Grinshpan, A. and Romanov, S., "Improvement of Diesel Engine Performance Through Fuel-injection Equipment Optimization," SAE Technical Paper 911820, 1991, https://doi.org/10.4271/911820.Also In
References
- Sviridov, Yu.B. Mixture formation and combustion in diesel engines” Mashinostrojenie Leningrad 1972
- Kaluzhin, S.A. Romanov, S.A. Sviridov, Yu.B. “Distribution of liquid fuel in the diesel spray volume” Dvigatelestrojenie 8 6 8 1980
- Kaluzhin, S.A. Romanov, S.A. Sviridov, Yu.B. “Experimental investigation of liquid and gaseous phase velocity in a diesel fuel spray” Dvigatelestrojenie 7 5 8 1980
- Kukushkin, V.L. Romanov, S.A. Sviridov, Yu.B. “Experimental investigation of optical fuel spray properties at diesel injection” Dvigatelestrojenie 12 19 21 1984
- Kukushkin, V.L. Romanov, S.A. Sviridov, Yu.B. “Experimental investigation of a structure of a non-stationary diesel fuel spray using a golography” Dvigatelestrojenie 2 3 7 1989
- Grinshpan, A.Z. Romanov, S.A. Sviridov, Yu.B. “Analytical model of development of liquid fuel spray in a stationary gas atmosphere” Trudy CNITA 64 17 23 1975
- Kutovoj, V.A. “Fuel injection in diesel engines” Mashinostrojenie Moscow 1981
- Sviridov, Yu.B. Grinshpan, A.Z. Romanov, S.A. “About calculation of evaporated diesel fuel spray” Trudy CNITA 69 3 11 1977
- Ivanchenko, N.N. Semenov, B.N. Sokolov, V.S. “Operation of a diesel engine with in-piston chamber” Mashinostrojenie Leningrad 1972
- Lin, W.T. Valdmanis, E. “The effects of physical factors on ignition lag” Proc. of inst. of Mech. Eng. 181 1 1967
- Mohlenkamp, H. 37 7/8 285 291 1976
- Woschni, G. “An universally applicable equation for the instantaneous heat transfer coefficient in the internal combustion engine” SAE Paper N670931 76 1967
- Fujimoto, H. Sato, G.T. Matsuzawa, T. “Investigation on combustion in a diesel engine using constant volume combustion chamber (Fourth paper: “Distance between position of first appearance of visible flame and nozzle tip, and flame growth”) Bulletin of the MESJ 7 4 343 350 1979
- Ikegami, M. “Directions of investigations of combustion process in diesel engines” Trans. Jap. Soc. Mech. Eng. 587 592 1982
- Hachian A.S. Galgovski, V.R. Nikitin: S.E. “Adjustment of automobile diesel engine operation Mashinostrojenie Moscow 1976
- Astahov, I.V. Trusov, V.I. Hachian, A.S. Golubkov, L.N. “Delivery and fuel gray in diesel engines” Mashinostrojenie Moscow 1972
- Chelpan, L.K. “Method of the back calculation of divided diesel engine fuel systems” Trudy CNITA 31 24 34 1966
- Grinshpan, A.Z. Romanov, S.A. “Calculation of characteristics of fuel-injection pump cam profile” Dvigatelestrojenie 2 10 13 1988
- Grinshpan, A.Z. Romanov, S.A. “The use of computer for calculation of the liquid fuel drop evaporation” Trudy CNITA 68 11 16 1976
- Grinshpan, A.Z. Romanov, S.A. “Computer program for an automated analysis of the injection parameter effect on the diesel engine operation” Trudy CNITA 85 167 173 1985