This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Experimental Investigation of Self-Excited Squeal
Annotation ability available
Sector:
Language:
English
Abstract
The squeal noise generated during the dry friction between a friction pad and a rotating disc, changes its inherent form (i.e. its sound pressure level and its frequency) with the normal load and sliding speed. The present study is based on the establishement of squeal regime for a relatively long time period (from ½ to 5 hours in a continuous manner) and then to accomplish the analysis of generated signals. The different properties existing in such signals are thoroughly investigated using an experimental setup simulating the disc brake assembly. The results indicate that sound pressure level of squeal noise is greatly reduced by increasing the system rigidity in normal direction of contact. Moreover, inaudible squeal is investigated at great values of system rigidity. The effect of contact stiffness on the establishement of squeal regime at a particular frequency, is observed. A simple technic is proposed to estimate the dynamic contact stiffness value. It is also found that normal load has a significant effect on the sound pressure level of the peaks in the sound spectrum and the frequencies of these peaks.
Recommended Content
Authors
- Hany Ali Sherif - Department of Mechanics & Elasticity Military Technical College Egypt
- Jean Blouet - Laboratory of Tribology Institut Superieur des Materiaux et de la Construction Mecanique, France
- Jean Francois Cretegny - Laboratory of Tribology Institut Superieur des Materiaux et de la Construction Mecanique, France
- Rene Gras - Laboratory of Tribology Institut Superieur des Materiaux et de la Construction Mecanique, France
- Serge Vialard - Laboratory of Vibrations and DynamicsInstitut Superieur des Materiaux et de la ConstructionMecanique, France
Topic
Citation
Sherif, H., Blouet, J., Cretegny, J., Gras, R. et al., "Experimental Investigation of Self-Excited Squeal," SAE Technical Paper 892451, 1989, https://doi.org/10.4271/892451.Also In
References
- Lamarque P.V. Williams C.G. “Brake Squeak The Experiences Of Manufacturers And Operators And some Preliminary Experiments” Research Report No.8500B of the Institution of Automobile Engineers 1938
- Fossberry R.A.C. Holubecki Z. “An Investigation of The Cause And the Nature of The Brake Squeal” Report No.1955/2 of M.I.R.A
- Fossberry R.A.C. Holubecki Z. “Some Experiments On The Prevention Of Brake Squeal” Report No.1957/2 of M.I.R.A
- Sinclaire D. Manville N.J. “Frictional Vibrations” Journal of Applied Mechanics June 1955 207 213
- Watari A. Sugimoto T. “Vibrations Caused By Dry Friction” JSME 7 25 1964
- Spurr R.T. “A Theory Of Brake Squeal” Proc. Auto. Div. Inst. Mech.Engrs., 1961-1962.No. 1 33 40
- Jarvis R.P. Mills B. “Vibration Induced By Dry Friction” Proc. Inst. Mech. Engrs 1963-1964 178
- North M.R. “Disc Brake Squeal-A Theoretical Model” Report No. 1972/5 of M.I. R.A
- Earles S.W.E. Badi M.N.M. “On The Interaction Of Two-Pin-Disc System With Reference To The Generation Of Disc-Brake Squeal” SAE paper 780331 Detroit 1978
- Millner N. “An Analysis Of Disc Brake Squeal” SAE paper 780332 Detroit 1978
- Mindlin R.D. “Compliance Of Elastic Bodies In Contact” ASME Journal of Applied Mechanics 16 1949
- Hailing J. “Principles Of Tribology” The Mac Millan Press 1979
- Palmgren A. “Ball And Roller Bearing Engineering” English Transaction Philadelphia 1946