This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Piston Engine Configuration Alternatives
Annotation ability available
Sector:
Language:
English
Abstract
This is a technological assessment of alternate engine component configuration and material alternatives. It includes a comparative analysis of key characteristics of Gasoline, Diesel and Gas Turbine engines built by Daihatsu. Honda, Isuzu, Mazda, Mitsubishi, Nissan. Suburu. Suzuki and Toyota. The piston engines range from two to ten cylinders with inline, vee and opposed configurations. Furthermore, additional special features and alternative choices include variable compression ratio, ceramic structural components, supercharger, turbocharger, twin turbocharger, supercharger-turbocharger combined and the regenerative gas turbine.
Recommended Content
Technical Paper | Coatings for Improving Engine Performance |
Ground Vehicle Standard | Engine Terminology and Nomenclature - General |
Technical Paper | Air-Cooled Cylinder-Head Design |
Citation
Wyczalek, F., "Piston Engine Configuration Alternatives," SAE Technical Paper 890472, 1989, https://doi.org/10.4271/890472.Also In
References
- ‘1955 Federal Emission Regulations’ US DOT, US Printing Office, Dept of Commerce Washington DC
- ‘Federal Fuel Economy Regulations - (CAFE)’ US DOT, US Printing Office, Dept of Commerce Washington DC
- Roy Rustrum ‘R&D Policy: Japan and the US’ The Journal of Science Policy and Research Management 2 3 1987 196 199 Nihongo
- 1988 International Conference On Strategic R&D Management Organizer-Japan Management Association, Cosponsor-The Society for Science Policy and Research Management (Japan) Tokyo 10-12 May 1988 Nihongo
- Narita Hiroshi ‘Economics and Energy in 21st Century Japan’ Hiroshi Narita, President CRIEPI, 7th EPRI-CRIEPI general meeting EPRI Journal 12 1 1987 16 19
- Umezu T ‘Perspectives of Japan's 21st Century Economic Society Energy and Electric Power Requirements’ CREIPI 1986 Annual Forecast Terau Umezu, Chairman of Long Term Electric Power Policy Study Committee Nihongo
- Wyczalek FA ‘The Generalized Balance of Inline, Vee and Opposed Piston Engines’ General Motors Corporation (GMC) # 880418 . SAE International Congress and Exposition Detroit, MI 29 Feb 04 Mar 1988
- The 26th International Tokyo Motor Show 31 Oct 11 Nov 1985 Harumi Fair Ground Tokyo
- The 27th International Tokyo Motor Show 30 Oct 09 Nov 1987 Harumi Fair Ground Tokyo
- Wyczalek FA ‘Electric Vehicle Propulsion in Japan’ GMC, Proceedings 22nd IECEC Philadelphia, PA 10-14 Aug 1987 2 956 963
- Wyczalek FA ‘Electric Vehicles, Magnetic Levitation and Superconductive Levitation in Japan’ Proceedings 23rd IECEC Denver, CO 31 Jly 04 Aug 1988 4 265 270
- Wyczalek FA ‘Electric Vehicle Propulsion and Magnetic Levitation’ Future Transportation Technology Conference and Exposition San Francisco, CA 08-11 Aug 1988 SAE # 881168
- Wyczalek FA ‘Electric Vehicle Propulsion and Magnetic Levitation of Automotive Vehicles’ 9th International Electric-vehicle Symposium Association Canadienne du Vehicule Electrique Toronto, Canada 13-16 Nov 1988
- ‘High Technology Ceramics in Japan’ National Materials Advisory Board, NRC, NMAB-418 National Academy Press 1984
- Okuda H ‘Activity Report of Ceramic Material Special Committee’ 1985 Jr SAE Japan 39 8 946 958 Nihongo
- Hattori Y Tajima Y ‘Development of Structural Ceramics’ NGK Spark Plug Co Ltd 1986 Jr SAE of Japan v40 8 975 979 Nihongo
- Hattori Y Tajima Y Yabuta K Matsuo Y Kawamura M Watanabe T ‘Gas Pressure Sintered Silicon Nitride for Turbocharger Application’ NGK Spark Plug Co Ltd. 2nd International Ceramics Symposium Lubeck-Travemunde FRG 14 17 1986
- Wakai F Sakaguchi S Matsuno Y ‘Superplasticity of Yttria-Stabilized Tetragonal ZrO2 Polycrystals’ Advanced Ceramic Matls 1 3 Jly 1986 259 263
- Wakai F Sakaguchi S kato H ‘Compressive Deformation Properties and Microstructures in the Superplastic Y-TZP’ Yogyo Kyokai-Shi 94 8 1986 721 725 Nihongo
- Suh CM GMC Tajima Y Kojima T Sato Y NGKSPCo ‘A Gas Pressure Sintered Silicon Nitride (GPSSN) Production Technique, Design and Its Application for the SI Engine’ General Motors Corp., NGK Spark Plug Co Ltd. 3rd International Symposium - Ceramic Materials and Components for Engines 27-30 Nov 1988 Las Vegas NV
- Helms HE Haley PJ Bell AH III ‘Emerging Ceramic Components for Automotive Gas Turbine Engines’ General Motors Corp. 3rd International Symposium - Ceramic Materials and Components for Engines 27-30 Nov 1988 Las Vegas NV
- ‘New Industrial Revolution and Japanese Business Strategy - Business Leaders View the Future of Industry and Society’ Business Japan Aug 1987 37 42