This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
The Vectorization of a Three-Dimensional Structural Analysis Code
Annotation ability available
Sector:
Language:
English
Abstract
The BIEM program, a three-dimensional structural analysis code, was run on the CDC Cyber 205 vector computer as part of a benchmark. As-is results were unpromising, with the 205 giving roughly one and a half times the speed of an IBM 3033. After a thorough vectorization, BIEM runs at one hundred times 3033 speed on the Cyber 205.
Authors
Citation
Hodous, M., "The Vectorization of a Three-Dimensional Structural Analysis Code," SAE Technical Paper 881811, 1988, https://doi.org/10.4271/881811.Also In
References
- Treffz, I. E. “Gegenstuck zum Ritzschen Verfahren,” Proceedings of the Second International Conference on Applied Mechanics Zurich 1926
- Shaw R. Pilkey W. Pilkey B. Wilson R. Lakis A. Chaudouet A. Marino C. “Innovative Numerical Analysis for the Engineering Sciences,” Proceedings, 2nd International Symposium University Press of Virginia Charlottesville 1980
- Jameson A. “Transonic Flow Calculations,” MAE Report #1651 Department of Mechanical and Aerospace Engineering, Princeton University 1983
- CDC Cyber 205 Hardware Reference Manual
- Golub, G. H. van Loan, C. F. Matrix Computations The Johns Hopkins University Press Baltimore 1983
- CDC VSOS Version 2 Reference Manual
- FORTRAN 200 Version 1 Reference Manual
- Katnik R. B. Hodous M. F. Bozek D. G. Ciarelli D. M. Ciarelli K. J. Kline K. A. “Boundary Integral Method of Structural Analysis on a Vector Processor,” Proceedings, Symposium on Cyber 205 Applications Colorado State University Fort Collins, Colorado August 12-13 1982
- Lachat J. C. “A Further Development of the Boundary Integral Technique for Elastostatics,” University of Southhampton England 1975
- Hodous M. F. Bozek D. G. Ciarelli D. M. Ciarelli K. J. Kline K. A. Katnik R. B. “Vector Processing Applied to Boundary Element Algorithms on the CDC CYBER-205,” Electricite de France Bulletin de la Direction des Etudes et Recherches Serie C - Mathematiques 1983
- Bozek D. G. Kline K. A. Katnik R. B. Wolf W. L. “Modeling Considerations in Use of Boundary Element Methods with Substructures,” Fifth International Conference on Vehicular Structural Mechanics Proceedings Society of Automotive Engineers 1984
- Bozek D. G. Katnik R. B. Kline K. A. Wolf W. L. “Modeling Techniques Using Boundary Element Methods,” Earthmoving Conference Society of Automotive Engineers 1984