This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Engineering the Surface Characteristics of Wear Resistant White Layers With Reference to the Design of Tribosystems
Annotation ability available
Sector:
Language:
English
Abstract
The presence of white layers on a surface has often been linked with poor performance and low surface integrity. The properties of white layer surfaces can be engineered however so that they exhibit high wear resistance. This is achieved by deliberately generating a white layer by machining under controlled abusive conditions; in this case turning.
This paper explores the viability of abusive turning as a surface modification technique. The influence of specimen microsctructure and of an asymmetric specimen configuration are examined with respect to the running-in behaviour and wear mechanisms. In addition, it is shown that by altering the machining conditions for white layer generation, certain aspects of this surface may be tailored. Finally, further improvements to this technique are discussed.
Recommended Content
| Technical Paper | Dynamic Friction Laws and Their Impact on Friction Induced Vibrations |
| Technical Paper | THE THEORY AND ADVANTAGES OF BALANCED BRAKE-FORCES
|
| Technical Paper | Feasibility Study of Ball Ramp Wear using Dynamic Simulation |
Authors
Citation
Furze, D., Griffiths, B., and Bertolotti, G., "Engineering the Surface Characteristics of Wear Resistant White Layers With Reference to the Design of Tribosystems," SAE Technical Paper 881625, 1988, https://doi.org/10.4271/881625.Also In
References
- Griffiths B.J. MECHANISMS OP WHITE LAYER GENERATION WITH REFERENCE TO MACHINING AND DEFORMATION PROCESSES ASME Journal of Tribology 109 1987 525 530
- Furze D.C. Griffiths B.J. WHITE LAYERS AT MACHINED SURFACES AND THEIR WEAR RESISTANCE Proceedings of the Conference on Engineering the Surface London 14-16 May, 1986 Institute of Metals
- Griffiths B.J. Furze D.C. TRIBOLOGICAL ADVANTAGES OF WHITE LAYERS PRODUCED BY MACHINING ASME Journal of Tribology 109 338 342 1987
- Furze D.C. SOME FUNDAMENTAL ASPECTS OF SLIDING WEAR AND THE GENERATION OF TRIBOSURFACE LAYERS Ph.D. Thesis Brunel University Uxbridge, U.K. 1988
- Sasada T. Norose S. Misbina H. THE BEHAVIOUR OF ADHERED FRAGMENTS INTERPOSED BETWEEN SLIDING SURFACES AND THE FORMATION PROCESS OF WEAR PARTICLES Proc.Conf. Wear of Materials 1979 ASME 72 80
- Landheer D. Zaat J.H. THE MECHANISM OF METAL TRANSFER IN SLIDING FRICTION Wear 27 1974 129 145
- Suh N.P. Sin H.C. THE GENESIS OF FRICTION Wear 69 1981 91 114
- Molgaard J. Srivastava V.K. THE VALUE OF SYMMETRICAL CONFIGURATIONS Wear 35 1975 365 369
- Rice S. Wayne S. SPECIMEN MATERIAL REVERSAL IN PIN ON DISC TRIBOTESTING Wear 88 1983 85 92
- Strode I. Goodfellow S. THE EFFECT OF ELECTRODISCHARGE MACHINING ON THE SURFACE INTEGRITY AND MECHANICAL PROPERTIES OF AN ALLOY STEEL Proceedings of 4th Int. Conf. Metrology and Properties of Engineering Surfaces Washington DC, USA April 1988
- Kalen S.E. Black J.T. THE ANATOMY OF A ROLLER BURNISHED SURFACE Proceedings of Int. Conf. on Surface Technology Pittsburgh, USA May 1973
- Brinksmeier E. Cammett J.T. Aachen P. Peters S.J. Tonshoff H.K. RESIDUAL STRESSES - MEASUREMENT AND CAUSES IN MACHINING PROCESSES Annals of the CIRP 31 1982 491 510
- Davies C. THE ELECTRON PROBE MICROANALYSIS OF ELECTRICAL DISCHARGE MACHINED ARC SURFACES J.Mat.Sci. 11 1976 1301 1304