This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Use of Synthetic Lubricants in Multigrade Motor Oils
Annotation ability available
Sector:
Language:
English
Abstract
The use of several different synthetic lubricants in the formulation of multigrade motor oils is examined from the point of view of their physical and chemical characteristics and their commercial suitability.
The influence of synthetic lubricant bases upon some of the performance characteristics of conventional additives has been considered.
Engine test results using an SAE 10W/50 oil containing an ester base are compared with the performance of a similar SAE grade motor oil based upon mineral oil alone.
Recommended Content
Authors
Citation
Imparato, L., Berti, F., Mancini, G., and Pusateri, G., "Use of Synthetic Lubricants in Multigrade Motor Oils," SAE Technical Paper 740118, 1974, https://doi.org/10.4271/740118.Also In
References
- Vorläufige Technische Lieferbedingungen-VTL 9150-063.” Germany August 1969
- Sezzi F. “Engine Tests for Lubricating Oils.” European Automotive Symposium Brussels June 12-15 1972
- Badiali F. Marta C. “Viscosity Requirements at Low Temperature of Italian Car Park Population.” I. P. Symposium Montreux April 2-6 1973
- Hollinghurst R. Singleton A. “Viscosity and Engine Performance.” Jrl. Institute of Petroleum 55 544 July 1969 205 218
- Eberan-Eberhorst C. G. A. Weise E. 26 2 February 1973 93 101
- Hollinghurst R. “High-Temperature Performance Test Needs for European Gasoline Engines.” I. P. Symposium Montreux April 2-6 1973
- Coon J. S. Loeffler D. E. “Routes of Crankcase Oil Loss.” SAE Transactions 67 1959 59 68
- Roux F. Paper 5/1 FISITA Symposium London June 25-30 1972
- Orrin D. S. Coles B. W. “Effects of Engine oil Composition on Oil Consumption.” SAE Transactions 80 1971 710141
- Badiali F. Chivilò F. Sezzi F. Quaderno 24 XVIII Congresso Nazionale, ATA Milano November 1971
- Gunderson R. C. Hart A. W. “Synthetic Lubricants.” New York Reinhold Publishing Corp. 1962
- Murry S. F. Johnson R. L. Bisson G. E. E. “Limiting Bulk Fluid Temperatures for Effective Boundary Lubrication by Synthetic Lubricants.” Lubrication Engineering July-August 1954 193 198
- Wilson D. K. “Fleet Tests of Synthetic Lubricants.” SAE Quarterly Transactions 2 2 April 1948 242 254
- Rumpf K. K. “Teilsynthetische Hochleistungsmotorenöle.” MZV Technischen Arbeitstagung Stuttgart March 10 1971
- Towle A. “Some Problems and Developments in the Field of Automotive Lubricants.” Proceedings IME 1970 1971 185 January 1971 1 20
- Billon A. Parc G. “Progres Recents dans la Fabrication des Huiles pour Moteurs.” Eighth World Petrol Congress 5 Moscow June 1971
- Bosse Dr. “Problems of Partially Synthetic Multigrade Motor Oils as Seen by the Motor Industry.” European Automotive Symposium Brussels June 12-15 1972
- Stech W. Stuttgart April 13 1972
- Gallopoulos N. E. “Engine Oil Thickening in High-Speed Passenger Car Service.” SAE Transactions 79 1970 700506
- Bardy D. C. Asseff P. A. “Motor Oil Thickening-A CLR Engine Test Procedure which Correlates with Field Service.” SAE Transactions 79 1970 700508
- Edmiston W. C. Peterson J. V. Sholts R. A. “Three Aspects of Motor Oil Thickening.” 700509 SAE Mid-Year meeting Detroit May 1970
- Allman L. J. Brehm A. E. Colyer C. C. “The ABC's of Motor Oil Oxidation.” 700510 SAE Mid-Year Meeting Detroit May 1970