This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Designing a Specified Reliability Directly into a Component
Annotation ability available
Sector:
Language:
English
Abstract
The methodology of designing by safety factors is presented and fallacies involved are discussed. Safety margin concepts are analyzed and their inadequacies presented. The necessity of specifying and determining the parameters defining the distributions of stress and strength is expounded. Probabilistic methods of calculating the reliability of components from their stress and strength distributions is developed and illustrated. Monte Carlo techniques of determining stress and strength distributions, given the distributions of the parameters affecting them are presented. The advantages and the limitations of the various methodologies are discussed and recommendations are made.
Citation
Kececioglu, D. and Cormier, D., "Designing a Specified Reliability Directly into a Component," SAE Technical Paper 640615, 1964, https://doi.org/10.4271/640615.Also In
References
- Lipson Charles Juvinall, R. C. “Handbook of Stress and Strength of Manufactured Parts.” The McMillan Co. New York City 1963
- Lipson, Charles Kerawalla Jal Mitchell, Larry “Engineering Applications of Reliability.” The University of Michigan, Engineering Summer Conferences Ann Arbor, Michigan 1963
- Shigley, Joseph E. “Mechanical Engineering Design.” McGraw-Hill Book Co., Inc. New York City 1963
- Myatt, Donald J. “Machine Design.” McGraw-Hill Book Co., Inc. New York City 1962
- Spotts, Meryle F. “Design of Machine Elements.” Prentice-Hall, Inc. Englewood Cliffs New Jersey 3rd Edition 1961
- Petersen, Rudolph E. “Stress Concentration Design Factors.” John Wiley and Sons New York City 1953
- Lavin, G. “Stress Concentrations Around Holes.” Pergammon Press New York City 1961
- Roark, Raymond J. “Formulas for Stress and Strain.” McGraw-Hill Book Co. New York City 1954
- Timoshenko, S. “Elementary Strength of Materials.” D. Van Nostrand Co. Princeton, New Jersey 1962
- Timoshenko, S. “Advanced Strength of Materials.” D. Van Nostrand Co. Princeton, New Jersey 1962
- Flugge, Wilhelm “Handbook of Engineering Mechanics.” McGraw-Hill Book Co., Inc. New York City 1962
- Hetenyi, Miklos I. “Handbook of Experimental Stress Analysis.” John Wiley and Sons New York City 1950
- Grover, H. J. Gordon S. A. Jackson, L. R. “The Fatigue of Metals and Structures.” Battelle Memorial Institute, Superintendent of Documents, U. S. Government Printing Office Washington 25, D. C. 1954
- Bussiere, Rene “A Method for Critiquing Design and Predicting Reliability in Advance of Hardware Availability.” SAE National Aeronautics Meeting, Paper No. 343A 1961
- Myers, P. J. “Monte Carlo: Reliability Tool for Design Engineers.” Proc. 9th National Symposium on Reliability and Quality Control San Francisco, California 487 492 Jan. 22– 24 1963
- Henrichs, R. H. “Techniques of Error Analyses - Part I. The Classical, Monte Carlo and Indexed Numerical Integration Methods.” Convair/Astronautics San Diego, California Report No. ZX-7-030-1 March 31 1959
- Pieruschka, Erich “Principles of Reliability.” Prentice-Hall, Inc. Englewood Cliffs, New Jersey 57 63 1963
- Gentle E. J. Chaple, C. E. “Aviation and Space Dictionary.” Aero Publishers, Inc. Los Angeles, Calif. 4th ed. 1961
- Faires, Virgil M. “Design of Machine Elements.” The MacMillan Co. New York, N.Y. 3rd Ed. 1955
- Parker, Henry “Simplied Mechanics and Strength of Materials,” John Wiley and Sons, New York New York 1951
- Maner E. R. Withy, M. O. “Strength of Materials.” John Wiley and Sons, New York N. Y. 1925
- Eshbach, Ovid W. “Handbook of Engineering Fundamentals.” John Wiley and Sons, New York N. Y. 3rd ed. 1950
- Bassin M. Bradsky, S. “Statics and Strength of Materials.” McGraw Hill Book Co., New York N. Y. 1960
- Howell, G. M. “Factors of Safety.” Machine Design 76 81 July 12 1956
- Phelan, Richard M. “Fundamentals of Machine Design.” McGraw Hill Book Co., New York N. Y. 2nd ed. 1962
- Bresler B. Lin, T. “Design of Steel Structures.” John Wiley and Sons, New York N. Y. 1960
- Schoof, R. “How Much Safety Factor?” Allis Chalmers Electrical Review, 1st Quarter 21 24 1960
- McCalley, Robert B. Jr., “Nomogram for Selection of Safety Factors.” Design News 138 141 Sept. 1 1957
- Lipson, Charles “New Concept on Safety Factors.” Product Engineering Vol. 9 275 278 Sept. 1960
- Lusser, Robert “Reliability Through Safety Margins.” U. S. Army Ordnance Missile Command Redstone Arsenal, Ala. ASTIA Document AD-212-476, U59-14 Oct. 1958
- “Reliability Manual.” Consolidated Systems Corp., 1500 So. Shamrock Ave. Monrovia, California Technical Memo May 1962
- Jailer, Robert W. Freilich Gerald Castellon, Angelo W. “Flight Vehicle Power Systems - Reliability Criteria.” Technical Report No. ASD-TR-61-736 American Power Jet Co. Ridgefield, New Jersey 233 262 March 1962
- “Estimating Reliability.” Martin Co., Electronic Systems and Products Division Baltimore 3, Md. 65 109 June 1962
- Eckert, L. A. “Design Reliability Prediction for Low Failure Rate Mechanical Parts.” Reliability Department, Allison Division, General Motors Corp. October 1959
- Haugen, Edward B. “Statistical Method for Structural Reliability Analysis.” North American Aviation, Inc., Space and Information Systems Division, Downey, California, Proceedings of the 10th Reliability and Quality Control Symposium Washington, D.C. 97 121 Jan. 7–9 1964
- Loyd D. K. Lipow, M. “Reliability: Management, Methods, and Mathematics.” Prentice-Hall, Inc. Englewood Cliffs, New Jersey 237 238 1962
- Hald, A. “Statistical Theory with Engineering Applications.” John Wiley and Sons New York 1952
- “General Information Manual-PERT.” IBM, Data Processing Division 112 East Post Road, White Plains, New York 1962
- Keeping, E. S. “Introduction to Statistical Inference.” D. Van Nostrand Co., Inc. Princeton, New Jersey 1962
- Pearson, Karl “Tables of the Incomplete Gamma Function.” Cambridge Univ. Press, Office of Biometrika London, England (re-issue) 1951
- Johnson R. E. Kiokemeister, F. R. “Calculus with Analytical Geometry.” Allyn and Bacon, Inc. Boston, Mass. 1957
- Bazovsky, Igor “Reliability Theory and Practice.” Prentice-Hall, Inc. Englewood Cliffs, New Jersey 45 46 1961
- Bratt, M. J. Reethof G. Weber, G. W. “A Model for Time Varying and Interfering Stress-Strength Probability Density Distributions with Consideration for Failure Incidence and Property Degradation.” To be presented at the SAE-ASME-AIAA Aerospace Reliability and Maintainability Conference Washington, D. C. June 29 1964