This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Numerical Analysis of Battery Thermal Management System Using Passive Cooling Technique
Technical Paper
2023-01-0990
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Event:
2023 AeroTech
Language:
English
Abstract
Nowadays electric vehicle is replacing internal combustion engines in the transport sector. The growth of electric vehicles is increasing rapidly to reduce the impact of global warming and climate change. The battery limits the use of electric vehicles as an exact alternative to traditional IC engine vehicles. Specifically, the operating temperature, charge/discharge rates, and internal heat generation of the battery the performance of electric vehicles, like the driving range, charge storage capacity, the cycle life of the battery, and thermal runaway occurring at high temperatures. To overcome these problems, the battery thermal management system (BTMS) controls the temperature of the battery and maintains the optimal temperature to operate the battery efficiently and safely. In the heights of the above facts, the numerical analysis of 18650 Li-ion battery thermal management systems by passive cooling technology using Phase Change Material (PCM). The recent developments in battery thermal management systems, in particular, battery module analysis with and without PCM at different C rates, with and without fin are discussed at length.
Numerical Analysis using ANSYS FLUENT is carried out to determine the effect of the use of PCM on heat transfer in the battery module. Temperature distribution along the battery in the region of PCM with and without the use of fins of various geometries and their configuration are predicted. Among all the geometries studied, the use of āIā section fin had a profound beneficial effect on heat transfer leading to better performance of the battery.
Authors
- Anand K. Joshi - Presidency University Bangalore, Department of Mechanical En
- Devendra Dandotiya - Presidency University Bangalore, Department of Mechanical En
- C. S. Ramesh - Presidency University Bangalore, Department of Mechanical En
- Satyam Panchal - University of Waterloo, Department of Mechanical and Mechatr
Topic
Citation
Joshi, A., Dandotiya, D., Ramesh, C., and Panchal, S., "Numerical Analysis of Battery Thermal Management System Using Passive Cooling Technique," SAE Technical Paper 2023-01-0990, 2023, https://doi.org/10.4271/2023-01-0990.Also In
References
- Lenzen , M. Life Cycle Energy and Greenhouse Gas Emissions of Nuclear Energy: A Review Energy Convers. Manag. 49 8 2008 2178 2199 10.1016/J.ENCONMAN.2008.01.033
- Sheikholeslami , M. , Arabkoohsar , A. , Khan , I. , Shafee , A. et al. Impact of Lorentz Forces on Fe3O4-Water Ferrofluid Entropy and Exergy Treatment within a Permeable Semi Annulus J. Clean. Prod. 221 2019 885 898 10.1016/J.JCLEPRO.2019.02.075
- Nitta , N. , Wu , F. , Lee , J.T. , and Yushin , G. Li-ion Battery Materials: Present and Future Mater. Today 18 5 2015 252 264 10.1016/J.MATTOD.2014.10.040
- Bais , A.R. , Subhedhar , D.G. , Joshi , N.C. , and Panchal , S. Numerical Investigation on Thermal Management System for Lithium Ion Battery Using Phase Change Material Mater. Today Proc. 66 2022 1726 1733 10.1016/J.MATPR.2022.05.269
- Xia , G. , Cao , L. , and Bi , G. A Review on Battery Thermal Management in Electric Vehicle Application J. Power Sources 367 2017 90 105 10.1016/J.JPOWSOUR.2017.09.046
- Wenlong , S. , Xiaokai , C. , and Lu , W. Analysis of Energy Saving and Emission Reduction of Vehicles Using Light Weight Materials Energy Procedia 88 2016 889 893 10.1016/J.EGYPRO.2016.06.106
- Speirs , J. , Contestabile , M. , Houari , Y. , and Gross , R. The Future of Lithium Availability for Electric Vehicle Batteries Renew. Sustain. Energy Rev. 35 2014 183 193 10.1016/J.RSER.2014.04.018
- Svoboda , V. Batteries | Fast Charging Encycl. Electrochem. Power Sources 2009 424 442 10.1016/B978-044452745-5.00368-3
- Panchal , S. , Dincer , I. , Agelin-Chaab , M. , Fraser , R. et al. Transient Electrochemical Heat Transfer Modeling and Experimental Validation of a Large Sized LiFePO4/Graphite Battery Int. J. Heat Mass Transf. 109 2017 1239 1251 10.1016/J.IJHEATMASSTRANSFER.2017.03.005
- Han , X. et al. A Review on the Key Issues of the Lithium Ion Battery Degradation among the Whole Life Cycle eTransportation 1 100005 2019 10.1016/J.ETRAN.2019.100005
- 2022 http://industrial.panasonic.com/jp/i/00000/sales_jp/sales_jp/industry.htmlSalesbaseshttp://industrial.panasonic.com/index/salesbases/salesbases.html
- Chen , K. , Song , M. , Wei , W. , and Wang , S. Structure Optimization of Parallel Air-Cooled Battery Thermal Management System with U-Type Flow for Cooling Efficiency Improvement Energy 145 2018 603 613 10.1016/J.ENERGY.2017.12.110
- Chen , S. , Peng , X. , Bao , N. , and Garg , A. A Comprehensive Analysis and Optimization Process for an Integrated Liquid Cooling Plate for a Prismatic Lithium-Ion Battery Module Appl. Therm. Eng. 156 2019 324 339 10.1016/J.APPLTHERMALENG.2019.04.089
- Wilke , S. , Schweitzer , B. , Khateeb , S. , and Al-Hallaj , S. Preventing Thermal Runaway Propagation in Lithium Ion Battery Packs Using a Phase Change Composite Material: An Experimental Study J. Power Sources 340 2017 51 59 10.1016/J.JPOWSOUR.2016.11.018
- Choudhari , V.G. , Dhoble , A.S. , and Panchal , S. Numerical Analysis of Different Fin Structures in Phase Change Material Module for Battery Thermal Management System and its Optimization Int. J. Heat Mass Transf. 163 2020 10.1016/j.ijheatmasstransfer.2020.120434
- Pandiyan , P.S. , Dandotiya , D. , Alathadi Maloor , S. , and Rajagopalan , S. Thermal Performance Assessment of Phase Change Material for Electronic Cooling: An Experimental Investigation Energy Storage 2022 e402 10.1002/EST2.402
- Dandotiya , D. and Banker , N.D. Energy Efficiency Improvement of a Refrigerator Integrated with Phase Change Material-Based Condenser J. Energy Resour. Technol. Trans. ASME 143 8 2021 10.1115/1.4048871/1089005
- Dandotiya , D. , and Banker , N.D. Performance Improvement of Gas Turbine Power Plant by Intake Air Passive Cooling Using Phase Change Material Based Heat Exchanger ASME 2017 Gas Turbine India Conference GTINDIA 2017 1 1 8 2018 10.1115/GTINDIA2017-4746
- Dandotiya , D. and Banker , N.D. Numerical Investigation of Heat Transfer Enhancement in a Multitube Thermal Energy Storage Heat Exchanger Using Fins Numer. Heat Transf. Part A Appl. 72 5 2017 389 400
- Sharma , A. , Tyagi , V.V. , Chen , C.R. , and Buddhi , D. Review on Thermal Energy Storage with Phase Change Materials and Applications Renew. Sustain. Energy Rev. 13 2 2009 318 345 10.1016/J.RSER.2007.10.005
- Tian , L.L. , Liu , X. , Chen , S. , and Shen , Z.G. Effect of fin material on PCM melting in a rectangular enclosure Appl. Therm. Eng. 167 2020 114764 10.1016/J.APPLTHERMALENG.2019.114764
- Weng , J. , Ouyang , D. , Yang , X. , Chen , M. et al. Optimization of the Internal Fin in a Phase-Change-Material Module for Battery Thermal Management Appl. Therm. Eng. 167 2020 114698 10.1016/J.APPLTHERMALENG.2019.114698
- Javani , N. , Dincer , I. , Naterer , G.F. , and Yilbas , B.S. Heat Transfer and Thermal Management with PCMs in a Li-ion Battery Cell for Electric Vehicles Int. J. Heat Mass Transf. 72 2014 690 703 10.1016/J.IJHEATMASSTRANSFER.2013.12.076
- Wang , S. , Faghri , A. , and Bergman , T.L. A Comprehensive Numerical Model for Melting with Natural Convection Int. J. Heat Mass Transf. 53 9ā10 2010 1986 2000 10.1016/J.IJHEATMASSTRANSFER.2009.12.057
- Fadl , M. and Eames , P. A Numerical Investigation into the Heat Transfer and Melting Process of Lauric Acid in a Rectangular Enclosure with Three Values of Wall Heat Flux Energy Procedia 158 2019 4502 4509 10.1016/J.EGYPRO.2019.01.761
- Weng , J. , Yang , X. , Zhang , G. , Ouyang , D. , Chen , M. , and Wang , J. Optimization of the Detailed Factors in a Phase-Change-Material Module for Battery Thermal Management Int. J. Heat Mass Transf. 138 126 134 2019 10.1016/J.IJHEATMASSTRANSFER.2019.04.050