Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Impact of Materials Properties on Higher-Temperature Engine Operation

Journal Article
2021-01-1142
ISSN: 2641-9645, e-ISSN: 2641-9645
DOI: https://doi.org/10.4271/2021-01-1142
Published September 21, 2021 by SAE International in United States
Impact of Materials Properties on Higher-Temperature Engine Operation
Sector:
Citation: Mills, Z., Finney, C., Haynes, J., Trofimov, A. et al., "Impact of Materials Properties on Higher-Temperature Engine Operation," SAE Int. J. Adv. & Curr. Prac. in Mobility 4(2):448-461, 2022, https://doi.org/10.4271/2021-01-1142.
Language: English

References

  1. Splitter , D. , Pawlowski , A. , and Wagner , R. A Historical Analysis of the Co-evolution of Gasoline Octane Number and Spark-Ignition Engines Front. Mech. Eng. 1 2016 10.3389/fmech.2015.00016
  2. Megel , M. , Westmoreland , B. , Jones , G. , Phillips , F. et al. Development of a Structurally Optimized Heavy Duty Diesel Cylinder Head Design Capable of 250 Bar Peak Cylinder Pressure Operation SAE Int. J. Engines 4 3 2011 2736 2755 https://doi.org/10.4271/2011-01-2232
  3. Pierce , D. , Haynes , A. , Hughes , J. , Graves , R. et al. High Temperature Materials for Heavy Duty Diesel Engines: Historical and Future Trends Prog. Mat. Sci. 103 2019 109 179 10.1016/j.pmatsci.2018.10.004
  4. Fontanesi , S. , Cicalese , G. , and Tiberi , A. Combined In-cylinder / CHT Analyses for the Accurate Estimation of the Thermal Flow Field of a High Performance Engine for Sport Car Applications SAE Technical Paper 2013-01-1088 2013 https://doi.org/10.4271/2013-01-1088
  5. Wu , M. , Pei , Y. , Qin , J. , Li , X. et al. Study on Methods of Coupling Numerical Simulation of Conjugate Heat Transfer and In-Cylinder Combustion Process in GDI Engine SAE Technical Paper 2017-01-0576 2017 https://doi.org/10.4271/2017-01-0576
  6. LeGuille , M. , Ravet , F. , Le Moine , J. , Pomraning , E. et al. Coupled Fluid-Solid Simulation for the Prediction of Gas-Exposed Surface Temperature Distribution in a SI Engine SAE Technical Paper 2017-01-0669 2017 https://doi.org/10.4271/2017-01-0669
  7. Shah , B. , Moiz , A. , Hoffmeyer , M. , Abidin , Z. et al. A Comprehensive CFD-FEA Conjugate Heat Transfer Analysis for Diesel and Gasoline Engines SAE Technical Paper 2019-01-0212 2019 https://doi.org/10.4271/2019-01-0212
  8. Broatch , A. , Margot , X. , Garcia-Tiscar , J. , and Escalona , J. Validation and Analysis of Heat Losses Prediction Using Conjugate Heat Transfer Simulation for an Internal Combustion Engine SAE Technical Paper 2019-24-0091 2019 https://doi.org/10.4271/2019-24-0091
  9. Hoffmeyer , M. , Moiz , A.A. , Hoag , K. , Megel , A. et al. Advances Toward the Goal of a Genuinely Conjugate Engine Heat Transfer Analysis SAE Technical Paper 2019-01-0008 2019 https://doi.org/10.4271/2019-01-0008
  10. Cerdoun , M. , Carcasci , C. , and Ghenaiet , A. An Approach for the Thermal Analysis of Internal Combustion Engines’ Exhaust Valves Appl. Thermal Eng. 102 2016 1095 1108 10.1016/j.applthermaleng.2016.03.105
  11. Kavuri , C. and Anders , J. Methodology to Perform Conjugate Heat Transfer Modeling for a Piston on a Sector Geometry for Direct-Injection Internal Combustion Engine Applications SAE Technical Paper 2019-01-0210 2019 https://doi/org10.4271/2019-01-0210
  12. Li , Y. and Kong , S.-C. Coupling conjugate heat transfer with in-cylinder combustion modeling for engine simulation Int. J. Heat Mass Trans. 54 11-12 2011 2467 2478 10.1016/j.ijheatmasstransfer.2011.02.015
  13. Patil , M. , Pise , A. , and Gokhale , N. Simulation of Conjugate Heat Transfer (CHT) Between Engine Head and Cooling Medium of Diesel Engine SAE Technical Paper 2015-01-1662 2015 https://doi.org/10.4271/2015-01-1662
  14. Mills , Z.G. , Finney , C.E.A. , Edwards , K.D. , and Haynes , J.A. 2018 Benefits of Higher-Temperature Operation in Boosted SI Engines Enabled by Advanced Materials American Society of Mechanical Engineers 2018 Internal Combustion Engine Division Fall Technical Conference, Paper No. ICEF2018-9739 10.1115/ICEF2018-9739
  15. GT-POWER User’s Manual GT-Suite™ Version 2017, Gamma Technologies 2017
  16. Richards , K.J. , Senecal , P.K. , and Pomraning , E. 2021 CONVERGE 3.0, Convergent Science, Madison, WI
  17. Douaud , A.M. and Eyzat , P. Four-Octane-Number Method for Predicting the Anti-Knock Behavior of Fuels and Engines SAE Technical Paper 780080 1978 https://doi.org/10.4271/780080
  18. Woschni , G. A Universally Applicable Equation for the Instantaneous Heat Transfer Coefficient in the Internal Combustion Engine SAE Technical Paper 670931 1967 https://doi.org/10.4271/670931
  19. Chen , Y.-C. and Worden , J.A. Evaluation of Microalloyed Steel for Articulated Piston Applications in Heavy Duty Diesel Engines SAE Technical Paper 2000-01-1232 2000 https://doi.org/10.4271/2000-01-1232
  20. José , M.M.L. and José , A.C.M. Metallurgical Stability of Articulated Piston under Severe Engine Operating Condition SAE Technical Paper 930719 1993 https://doi.org/10.4271/930719
  21. Larson , J.M. , Jenkins , L.F. , Narasimhan , S.L. , and Belmore , J.E. Engine Valves — Design and Material Evolution J. Eng. Gas Turbines Power 109 4 1987 355 361 10.1115/1.3240048
  22. SAE International Engine Poppet Valve Information Report SAE Standard J775_200411 2004 https://doi.org/10.4271/J775_200411
  23. Schaefer , S.K. , Larson , J.M. , Jenkins , L.F. , and Wang , Y. 1997 Evolution of Heavy Duty Engine Valves — Materials and Design Proceedings of the International Symposium on Valvetrain System Design and Materials www.osti.gov/biblio/577661
  24. GmbH , M.A.H.L.E. Pistons and Engine Testing 2nd Stuttgart, Springer Vieweg 2016 10.1007/978-3-658-09941-1
  25. Shyam , A. , Roy , S. , Shin , D. , Poplawsky , J.D. et al. Elevated Temperature Microstructural Stability in Cast AlCuMnZr Alloys through Solute Segregation Mat. Sci. Eng. A 765 2019 138279 10.1016/j.msea.2019.138279
  26. Muralidharan , G. Low-Cost, High-Strength Fe-Ni-Cr Alloys for High Temperature Exhaust Valve Applications US Patent 9752468 2017
  27. Yamamoto , Y. , Brady , M.P. , Lu , Z.P. , Maziasz , P.J. et al. Creep-Resistant, Al 2 O 3 -Forming Austenitic Stainless Steels Science 316 5823 2007 433 436 10.1126/science.1137711
  28. Pan , J. , Nigro , R. , and Matsuo , E. 3-D Modeling of Heat Transfer in Diesel Engine Piston Cooling Galleries SAE Technical Paper 2005-01-1664 2005 https://doi.org/10.4271/2005-01-1644

Cited By

Recommended Content

Technical Paper Effects of Low Temperature Reforming (LTR) Products of Low Octane Number Fuels on HCCI Combustion
Technical Paper Rig Test of Diesel Combustion Chamber with Piston Coated by Optically Simulated Semitransparent PSZ-Ceramic
Technical Paper Recent Developments in Hardfacing Alloys for Internal Combustion Engine Valves