This content is not included in your SAE MOBILUS subscription, or you are not logged in.
Structure Borne Noise Optimization of Diesel Engine by Simulation
ISSN: 0148-7191, e-ISSN: 2688-3627
Published July 10, 2017 by SAE International in United States
This content contains downloadable datasetsAnnotation ability available
Event: International Conference on Advances in Design, Materials, Manufacturing and Surface Engineering for Mobility
The vibration and acoustic behaviour of the internal combustion engine is a highly complex one, consisting of many components that are subject to loads that vary greatly in magnitude and which operate at a wide range of speeds. The interaction of these components and the excitation of resonant modes of vibration is a major problem for the powertrain engineer when optimising the noise and vibration characteristics of the engine. This paper summarises a study that has been undertaken to assess and optimise the dynamic behaviour of a current production diesel engine with the objective of reducing radiated noise from the engine. The dynamic behaviour of the diesel engine has been assessed using simulation tools. The dynamic analysis will predict the forces and displacements at each of the nodes of the model by forced response analysis. Predicted results and experimentally measured values were found to be in close agreement. A number of production feasible design modifications have been considered and analysed. Structural modifications viz. ribbing pattern, stiffeners and gusset additions were suggested by taking reference of NSI findings to improve the overall stiffness of the engine assembly. It has been demonstrated that by changing material such as visco elastic material gives reductions in radiated noise. The hybrid approach so used helped in reducing noise level of engine to meet set noise level targets with a minimal increase in overall mass.
CitationShaik Mohammad, A., Vijayakumar, R., and Panduranga, N., "Structure Borne Noise Optimization of Diesel Engine by Simulation," SAE Technical Paper 2017-28-1944, 2017, https://doi.org/10.4271/2017-28-1944.
Data Sets - Support Documents
|[Unnamed Dataset 1]|
|[Unnamed Dataset 2]|
- Nussmann C., Steffens C., Atzler M., “Modern Tools and Methods for Low Noise Engine Development”, FEV, ISMA, Leuven (2010).
- "AUTOMOTIVE INDUSTRY STANDARD", Driver-Perceived Noise Level of Agricultural Tractors -Method of Measurement, REGD. NO. D. L.-33004/99.
- V, R. and Prakash, B., "Agricultural Tractor Noise Control," SAE Technical Paper 2013-01-2342, 2013, doi:10.4271/2013-01-2342.
- Surkutwar, Y., Patwardhan, M., Karanth, N., and Gaikwad, A., "Use of Combined CAE and Experimental Testing Approach for Engine Noise Reduction," SAE Technical Paper 2015-26-0123, 2015, doi:10.4271/2015-26-0123.
- Takahira M., Noba M, and Matsuoka H., “Development of sound absorption measuring system with acoustic chamber”, Society of Automotive Engineers of Jasump, Inc. and Elsevier Science B.V., 1999
- Gustafsson M., Jacqmot J., Caro S. “Experimental Validation of an Efficient Procedure for Large Acoustic Radiation Problems” ISMA, Leuven (2010).