This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Compatibility Assessment of Plastic Infrastructure Materials with Test Fuels Representing E10 and iBu16
Journal Article
2015-01-0894
ISSN: 1946-3952, e-ISSN: 1946-3960
Sector:
Citation:
Kass, M., Janke, C., Theiss, T., Baustian, J. et al., "Compatibility Assessment of Plastic Infrastructure Materials with Test Fuels Representing E10 and iBu16," SAE Int. J. Fuels Lubr. 8(1):95-110, 2015, https://doi.org/10.4271/2015-01-0894.
Language:
English
References
- Energy Independence and Security Act of 2007: A Summary of Major Provisions CRS Report for Congress, Order Code RL34294 Dec. 21 2007
- Partial Grant of Clean Air Act Waiver Application Submitted by Growth Energy to Increase Allowable Ethanol Content of Gasoline to 15 Percent; Decision of the Administrator (EPA-HQ-OAR-2009-0211 FRL-9258-6) Federal Register 76 17 4662 Jan. 26 2011
- Touchet , P. , Zanadis , B. , Fischer , M. , and Gatza , P. E. Materials Compatibilities Studies with Fuel/Alcohol Mixtures Technical Report 2366 U. S. Army Mobility Equipment Research and Development Command Fort Belvoir, VA July 1982
- Karg , R. F. , Hill , C. , Dosch , K. , and Johnson , B. Ultra-high CAN Polymer in Fuel System Application SAE Technical Paper 900196 1990 10.4271/900196
- Abu-Isa , I. Effects of Mixtures of Gasoline With Methanol and With Ethanol on Automotive Elastomers SAE Technical Paper 800786 1980 10.4271/800786
- Micallef , G. and Weimann , A. Elastomer Selection for Bio-fuel Requires a System Approach Sealing Technology January 2009
- Ertekin , A. and Sridhar , N. Performance of Elastomeric Materials in Gasoline-Ethanol Blends-A Review Paper no. 09533, CORROSION 2009 Annual Conference and Exhibition NACE International Atlanta 2009
- Stephens , R. D. Fuel and Permeation Resistance of Fluoroelastomers to Ethanol Blends ACS Technical Meeting of the Rubber Division Cincinnati, OH October 2006
- Nersasian , A. The Use of Toluene/Isooctane/Alcohol Blends to Simulate the Swelling Behavior of Rubbers in Gasoline/Alcohol Fuels SAE Technical Paper 800790 1980 10.4271/800790
- Nihalani , I. , Paulmer , R. , and Rao , Y. Compatibility of Elastomeric Materials with Gasohol SAE Technical Paper 2004-28-0062 2004 10.4271/2004-28-0062
- Jones , B. , Mead , G. , Steevens , P. , and Connors , C. The Effects of E20 on Elastomers Used in Automotive Fuel System Components Minnesota Center for Automotive Research, Minnesota Center for Automotive Research, Minnesota State University Mankato February 22 2008
- Kass , M. , Theiss , T , Janke , C. , Pawel , S. and Lewis , S. Intermediate Ethanol Blends Infrastructure Materials Compatibility Study: Elastomers, Metals and Sealants Report ORNL/TM-2010/326 Oak Ridge National Laboratory March 2011
- Kass , M. , Theiss , T , Janke , C. , and Pawel , S. Compatibility Study for Plastic, Elastomeric, and Metallic Fueling Infrastructure Materials Exposed to Aggressive Formulations of Ethanol-blended Gasoline Report ORNL/TM-2012/88 Oak Ridge National Laboratory May 2012
- Kass , M. et al. Compatibility of Elastomers with Test Fuels of Gasoline Blended with Ethanol Sealing Technology 7 12 December 2012
- Pawel , S. J. , Kass , M. D. , and Janke , C. J. Preliminary Compatibility Assessment of Metallic Dispenser Materials for Service in Ethanol Fuel Blends Report ORNL/TM-2009/086 Oak Ridge National Laboratory November 2009
- https://www.federalregister.gov/articles/2012/06/07/2012-13823/regulation-of-fuel-and-fuel-additives-modification-to-octamix-waiver-txceed 2012
- Koch , W. and Baustian , J. Isobutanol: Biofuel of the Future PEI Journal 34 4 th 2012
- Kass , M. D. , Janke , C. J. , Pawel , S. J. , Thomson , J. K. , Meyer , H. , and Theiss , T. J. Compatibility Study for Plastic, Elastomeric, and Metallic Fueling Infrastructure Materials Exposed to Aggressive Formulations of Isobutanol-blended Gasoline Report ORNL/TM-2013/243 August 2013
- Hansen , C. Hansen Solubility Parameters: A User's Handbook 2 nd CRC Press Boca Rotan, Florida 2007
- SAE Surface Vehicle Recommended Practice Gasoline, Alcohol, and Diesel Fuel Surrogates for Materials Testing SAE Standard J1681 Jan. 2000
- ASTM D543 Standard Test Method for Evaluating the Resistance of Plastics to Chemical Reagents, 2014.11.01 2014
- ASTM D2240 Standard Test Method for Rubber Property-Durometer Hardness, 2005.08.15 2010
- Starkweather , H. W. Water in Nylon Water in Polymers Rowland Stanley P. 127 American Chemical Society 1980 433 440