Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Proposed Metrological Method for Identifying Automotive Brake Discs

Journal Article
2015-01-0691
ISSN: 1946-3952, e-ISSN: 1946-3960
DOI: https://doi.org/10.4271/2015-01-0691
Published April 14, 2015 by SAE International in United States
Proposed Metrological Method for Identifying Automotive Brake Discs
Sector:
Citation: Ali, S., Zahwi, S., and Dadoura, H., "Proposed Metrological Method for Identifying Automotive Brake Discs," SAE Int. J. Fuels Lubr. 8(1):41-49, 2015, https://doi.org/10.4271/2015-01-0691.
Language: English

References

  1. Masterparts Co. Metelli Brake Pads and Discs, The attention to detail for extremely important components Car Maintenance Italy 21 July 2013
  2. Norlander , Martin Crack propagation in fixed caliper brake discs MSc Thesis Mechanical Engineering Dept., Division of Solid Mechanics, Lund University Sweden 2005
  3. Ali , S.H.R. , Azzam , B.S. , Dadoura , H.H. and Bedewy , M.K. Design parameters of automotive disc brake system The 6 th Int. Conference of the Egyptian Society of Tribology (EgTrib-6) 33 45 Cairo Univ. Giza, Egypt 28 29 Dec. 2002
  4. Ali , SHR , Rizk , MA , Mohamad , HH and Lotfy , I. Surface roughness due to friction on the performance of heavy-duty brakes Ain Shams Univ. Journal of Mechanical Engineering(ASJME) 2 13 19 2010
  5. Ahmed , I. , Ali , S. , and Dadoura , H. Studying the Effect of Pad Contact Surface on the Frictional Behavior and Acoustic Noise Response for Heavy Duty Vehicle Brakes Using FAST Machine SAE Technical Paper 2006-01-3131 2006 10.4271/2006-01-3131
  6. Azzam , B.S. , Ali , S.H. , Dadoura , H.H. , and Bedewy , M. K. Design and Performance of a Proposed Asbestos-Free Frictional Composite Material for Automotive Brake Jour. of Eng. and Applied Science 51 Faculty of Eng. at Cairo Univ. Giza, Egypt April 2004
  7. Ali , Salah H.R. , Azzam , B.S. , Dadoura , H.H. , and Bedewy , M.K. The Influence of aramid fibers on the mechanical properties and friction stability of advanced friction composite materials 8 th Int. Conf. on Production Eng. Design and Control(PEDAC' 2004) Alexandria, Egypt 27 29 Dec. 2004
  8. Ali , Salah H.R. , Azzam , B.S. , Dadoura , H.H. , and Bedewy , M.K. The Role of ceramic fibers on the friction stability and mechanical properties of the disc brake pad for railway vehicle 1 st Int. Conf. on Science Research and its Applications (1 St ICSRA' 2004) Cairo Univ. Giza, Egypt 18 20 Dec. 2004
  9. Ali , Salah H.R. , Azzam , B.S. , Dadoura , H.H. , and Bedewy , M.K. Frictional noise and squeal monitoring for reinforcement in vehicle brake materials Int. Mechanical Engineering Conf. (IMEC04) 529 536 Kuwait 5 8 Dec. 2004
  10. Kang , B. and Tan , C.A. Nonlinear response of a beam under distributed moving contact load Communications in Nonlinear Science and Numerical Simulation 11 2 203 232 March 2006
  11. Quang , Hoai L. High temperature tribological behaviour of surface coated tool steel MSc Thesis Lulea Univ. of Technology Sweden 2008
  12. Eltoukhy , M. and Asfour , S. Braking process in automobiles: investigation of the thermoelastic instability phenomenon, Modelling and Simulation Petrone G. and Cammarata G. I-Tech Education and Publishing 2008
  13. Vernersson , T. Thermally induced roughness of tread braked railway wheels Part 2: Modelling and field measurements, Wear 236 1-2 106 116 1999
  14. Ahn , S.H. and Jang , Y.H. Frictionally excited thermo-elastoplastic instability Tribology Int. 43 4 779 784 2010
  15. Majcherczak , D. , Dufrenoy , P. , and Berthier , Y. Tribological, thermal and mechanical coupling aspects of the dry sliding contact Tribology Int. 40 5 834 843 2007
  16. Bekesi , Nandor and Varadi , Karoly Contact thermal analysis and wear simulation of a brake block Advances in Tribology 2013 1 7 2013
  17. Gao , N. , Brown , M. , Miller , K.J. and Reed , P.A.S. An investigation of crack growth behaviour under creep-fatigue condition Materials Science and Eng. 410 25 67 71 2005
  18. Geng , M.F. An idea for predicting crack growth time to fracture under creep-fatigue conditions Materials Science and Engineering 257 2 250 255 1998
  19. Yan , Ming , Zhu , Xiang-jun and Wang , Shi-jie Research on the controlling parameters of creep-thermal fatigue crack Advances in Mechanical Eng. 2013 1 8 2013
  20. UNECE Geometric requirements, Specifications and tests, Uniform provisions concerning the approval of replacement brake lining assemblies, drum brake linings and discs and drums for power-driven vehicles and their trailers Agreement Addendum 89: Regulation No. 90, Revision 3 17 Feb. 2012
  21. Ali , Salah H.R. Performance investigation of CMM measurement quality using Flick Standard Journal of Quality and Reliability Eng. 2014 1 11 July 2014
  22. ISO Geometrical Product Specifications (GPS)-Acceptance and Reverification Tests for Coordinate Measuring Machines (CMM)-Part 2: CMMs used for Measuring Size ISO 10360-2 15 12 2001
  23. ISO Geometrical Product Specifications (GPS)-Acceptance and Reverification Tests for Coordinate Measuring Machines (CMM)-Part 1: CMMs used for Measuring Size ISO 10360-1 15 12 2001
  24. ISO Metallic materials - Brinell hardness test - Part-1: Test method ISO 6506-1:2005 2005

Cited By

Recommended Content

Technical Paper Ferritic Nitrocarburized Brake Rotors
Technical Paper Comparison of Fatigue Testing and Fatigue Calculation for an Al Alloy Brake Caliper Housing
Technical Paper The Effect of the Composition and Microstructure of Gray Cast Iron on Preferential Wear During Parasitic Drag and on Intrinsic Damping Capacity