Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Development of High Strength, High Thermal Conductivity Cold Sprayed Coatings to Improve Thermal Management in Hybrid Motorcycles

Journal Article
2014-32-0044
ISSN: 1946-3979, e-ISSN: 1946-3987
DOI: https://doi.org/10.4271/2014-32-0044
Published November 11, 2014 by SAE International in United States
Development of High Strength, High Thermal Conductivity Cold Sprayed Coatings to Improve Thermal Management in Hybrid Motorcycles
Sector:
Citation: Vezzù, S., Cavallini, C., Rech, S., Vedelago, E. et al., "Development of High Strength, High Thermal Conductivity Cold Sprayed Coatings to Improve Thermal Management in Hybrid Motorcycles," SAE Int. J. Mater. Manf. 8(1):180-186, 2015, https://doi.org/10.4271/2014-32-0044.
Language: English

References

  1. Bhushan , B. Modern Tribology Handbook CRC Press Florida 978-0-8493-8403-5 2001
  2. Copper Development Association Beryllium Copper CDA Publication No. 54 1960
  3. ASM International ASM Handbook, vol. 2 - Properties and Selection: Non-Ferrous Alloys and Special-Purpose Materials ASM International Ohio 978-0-8717-0378-1 1990
  4. Celebi Efe , C. , Altinsoy , I. , Yener , T. , Ipek , M. et al Characterization of Cemented Cu Matrix Composites Reinforced with SiC Vacuum 85 5 643 647 2010 10.1016/j.vacuum.2010.09.009
  5. Schubert , T. , Brendel , A. , Schmid , K. , Koeck , T. et al Interfacial Design of Cu/SiC Composites Prepared by Powder Metallurgy for Heat Sink Applications Composites Part A: Applied Science and Manufacturing 38 12 2398 2403 2007 10.1016/j.compositesa.2007.08.012
  6. Sudharshan Phani , P. , Vishnukanthan , V. , and Sundararajan , G. Effect of Heat Treatment on Properties of Cold Sprayed Nanocrystalline Copper Alumina Coatings Acta Materialia 55 14 4741 4751 2007 10.1016/j.actamat.2007.04.044
  7. Shabana , Y.M. , Karihaloo , B.L. , Zhu , X.H. , and Kulasegaram , S. Influence of Processing Defects on the Measured Properties of Cu- Al 2 O 3 Composites: A Forensic Investigation Composites Part A: Applied Science and Manufacturing 46 140 146 2012 10.1016/j.compositesa.2012.11.004
  8. Borchers , C. , Gartner , F. , Stoltenhoff , T. , Assadi , H. et al Microstructural and Macroscopic Properties of Cold Sprayed Copper Coatings Journal of Applied Physics 93 10064 10070 2003 http://10.1063/1.1573740
  9. Schmidt , T. , Gärtner , F. , and Kreye , H. New Developments in Cold Spray Based on Higher Gas- and Particle Temperatures Journal of Thermal Spray Technology 15 4 488 494 2006 10.1361/105996306X147144
  10. Raj , S.V. , Barrett , C. , Karthikeyan , J. , and Garlick , R. Comparison of the Cyclic Oxidation Behavior of Cold Sprayed CuCrAl-coated and Uncoated GRCop-84 Substrates for Space Launch Vehicles Surface and Coatings Technology 201 16-17 7222 7234 2007 10.1299/jmmp.4.189
  11. Rech , S. , Trentin , A. , Stoyanova , V. , and Vezzù , S. Study of Copper and Copper/Alumina Coldsprayed Deposits 2008 International Thermal Spray Conference Netherlands June 2 4 2008
  12. Koivuluoto , H. , Coleman , A. , Murray , K. , Kearns , M. et al High Pressure Cold Sprayed (HPCS) and Low Pressure Cold Sprayed (LPCS) Coatings Prepared from OFHC Cu Feedstock: Overview from Powder Characteristics to Coating Properties Journal of Thermal Spray Technology 21 5 1065 1075 2012 10.1007/s11666-012-9790-x
  13. Kwok , C.T. , Wong , P.K. , Man , H.C. , and Cheng , F.T. Effect of pH on Corrosion Behavior of CuCrZr in Solution Without and With NaCl Journal of Nuclear Materials 394 1 52 62 2009 10.1016/j.jnucmat.2009.08.006
  14. Zhan , Y. , Zeng , J. , and Zhuang , Y. Tribological Properties of Al 2 O 3 /CuCrZr composites Tribology Letters 20 2 163 170 2005 10.1007/s11249-005-8311-1
  15. Davis J. R. Copper and Copper Alloys ASM International Ohio 978-0-8717-0726-0 2001
  16. Sevillano , F. , Poza , P. , Múnez , C.J. , Vezzù , S. et al. Cold-Sprayed Ni-Al2O3 Coatings for Applications in Power Generation Industry Journal of Thermal Spray Technology 22 5 772 782 2013 10.1007/s11666-013-9890-2
  17. Spencer , K. , Fabijanic , D.M. , and Zhang , M.-X. The Influence of Al 2 O 3 Reinforcement on the Properties of Stainless Steel Cold Spray Coatings Surface and Coatings Technology 206 14 3275 3282 2012 10.1016/j.surfcoat.2012.01.031
  18. Irissou , E. , Legoux , J. , Arsenault , B. , and Moreau , C. Investigation of Al- Al 2 O 3 Cold Spray Coating Formation and Properties Journal of Thermal Spray Technology 16 5-6 661 668 2007 2007 10.1007/s11666-007-9086-8
  19. Schmidt , T. , Gärtner , F. , Assadi , H. , and Kreye , H. Development of a Generalized Parameter Window for Cold Spray Deposition Acta Materialia 54 3 729 742 2006 10.1016/j.actamat.2005.10.005
  20. Sova , A. , Papyrin , A. , and Smurov , I. Influence of Ceramic Powder Size on Process of Cermet Coating Formation by Cold Spray Journal of Thermal Spray Technology 18 4 633 641 2009 10.1007/s11666-009-9359-5
  21. Tao , Y. , Xiong , T. , Sun , C. , Jin , H. et al Effect of α- Al 2 O 3 on the Properties of Cold Sprayed Al/α- Al 2 O 3 Composite Coatings on AZ91D Magnesium Alloy Applied Surface Science 256 1 261 266 2009 10.1016/j.apsusc.2009.08.012
  22. Spencer , K. , Fabijanic , D.M. , and Zhang , M.-X. The Use of Al- Al 2 O 3 Cold Spray Coatings to Improve the Surface Properties of Magnesium Alloys Surface and Coatings Technology 204 336 344 2009 10.1016/j.surfcoat.2009.07.032
  23. Wong , W. , Irissou , R. , Ryabinin , A.N. , Legoux , J.-G. et al Influence of Helium and Nitrogen Gases on the Properties of Cold Gas Dynamic Sprayed Pure Titanium Coatings Journal of Thermal Spray Technology 20 1-2 213 226 2011 10.1007/s11666-010-9568-y
  24. Koivuluoto , H. , Lagerbom , J. , Kylmälahti , M. , and Vuoristo , P. Microstructure and Mechanical Properties of Low-Pressure Cold-Sprayed (LPCS) Coatings Journal of Thermal Spray Technology 17 5-6 721 727 2008 10.1007/s11666-008-9245-6
  25. Lewandowska , M. , and Kurzydlowski , K.J. Synergic Effects of Grain Refinement and Precipitation Strengthening Journal of Materials Science 45 17 4877 4883 2010 10.1007/s10853-010-4657-3
  26. Park , J. , Jung , Y. , Choi , B. , Lee , J. et al Investigation on the Microstructure and Mechanical Properties of CuCrZr After Manufacturing Thermal Cycle for Plasma Facing Component Journal of Nuclear Materials 417 1-3 916 919 2011 10.1016/j.jnucmat.2010.12.157
  27. Edwards , D.J. , Singh , B.N. , and Tähtinen , S. Effect of Heat Treatments on Precipitate Microstructure and Mechanical Properties of a CuCrZr Alloy Journal of Nuclear Materials 367-370 904 909 2007 10.1016/j.jnucmat.2007.03.064

Cited By

Recommended Content

Technical Paper High Thermal Conductivity Metal Matrix Composites
Technical Paper Increased Wetting of Saffil™ Reinforcement Preforms by the Addition of Bismuth to Aluminum Alloys
Technical Paper Squeeze Casting Process for Metal-Ceramic Composites