Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

A DOE Approach to Engine Deposit Testing used to Optimize the Design of a Gasoline Direct Injector Seat and Orifice

Journal Article
2012-01-1642
ISSN: 1946-3952, e-ISSN: 1946-3960
DOI: https://doi.org/10.4271/2012-01-1642
Published September 10, 2012 by SAE International in United States
A DOE Approach to Engine Deposit Testing used to Optimize the Design of a Gasoline Direct Injector Seat and Orifice
Sector:
Citation: Imoehl, W., Gestri, L., Maragliulo, M., Del-Frate, L. et al., "A DOE Approach to Engine Deposit Testing used to Optimize the Design of a Gasoline Direct Injector Seat and Orifice," SAE Int. J. Fuels Lubr. 5(3):1078-1095, 2012, https://doi.org/10.4271/2012-01-1642.
Language: English

References

  1. Schöppe, D. Greff, A. Zhang, H. Frenzel, H. Rösel, G. Achleitner, E. Kapphan, F. “Requirements for Future Gasoline DI Systems and Respective Platform Solutions,” 32. Internationales Wiener Motorensymoposium 2011
  2. The International Council on Clean Transportation “The US EPA/DOT Supplemental Notice of Intent Regarding Light-Duty Vehicle Standards for 2017-2025 Model Years,” Policy Update 13 August 19 2011
  3. Iwamoto, Y. Noma, K. Nakayama, O. Yamauchi, T. et al. “Development of Gasoline Direct Injection Engine,” SAE Technical Paper 970541 1997 10.4271/970541
  4. Harada, J. Tomita, T. Mizuno, H. Mashiki, Z. et al. “Development of Direct Injection Gasoline Engine,” SAE Technical Paper 970540 1997 10.4271/970540
  5. Okada, Y. Inokuchi, I. Yanagisawa, M. “Development of a High-Pressure Fueling System for a Direct-Injection Gasoline Engine,” SAE Technical Paper 981458 1998 10.4271/981458
  6. Kinoshita, M. Saito, A. Matsushita, S. Shibata, H. et al. “A Method for Suppressing Formation of Deposits on Fuel Injector for Direct Injection Gasoline Engine,” SAE Technical Paper 1999-01-3656 1999 10.4271/1999-01-3656
  7. Lepperhoff, G. Houben, M. “Mechanisms of Deposit Formation in Internal Combustion Engines and Heat Exchangers,” SAE Technical Paper 931032 1993 10.4271/931032
  8. Aradi, A. Imoehl, B. Avery, N. Wells, P. et al. “The Effect of Fuel Composition and Engine Operating Parameters on Injector Deposits in a High-Pressure Direct Injection Gasoline (DIG) Research Engine,” SAE Technical Paper 1999-01-3690 1999 10.4271/1999-01-3690
  9. Aradi, A. Hotchkiss, A. Imoehl, B. Sayar, H. Noyes, A. “The Effect of Fuel Composition, Engine Operating Parameters, and Additive Content on Injector Deposits in a High-Pressure Direct Injection Gasoline (DIG) Research Engine,” 9. Aachener Kolloquium Fahrzeug- und Motorentechnik 2000
  10. Arters, D. Macduff, M. “The Effect on Vehicle Performance of Injector Deposits in a Direct Injection Gasoline Engine,” SAE Technical Paper 2000-01-2021 2000 10.4271/2000-01-2021
  11. Zhao, F. Harrington, D.L. Lai, M-C. “Automotive Gasoline Direct-Injection Engines,” SAE International Warrendale, PA 978-0-7680-0882-1 2002 10.4271/R-135
  12. Aradi, A. Zahalka, T. Imoehl, B. “Impact of Aromatic Content and Type on Injector Deposit Formation in Direct Injection Gasoline Engines,” 6 th Annual Fuels & Lubes Asia Conference Singapore January 25 28 2000
  13. Arters, D. Bardasz, E. Schiferl, E. Fisher, D. “A Comparison of Gasoline Direct Injection Part I - Fuel System Deposits and Vehicle Performance,” SAE Technical Paper 1999-01-1498 1999 10.4271/1999-01-1498
  14. Aradi, A. Colucci, W. Scull, H. Openshaw, M. “A Study of Fuel Additives for Direct Injection Gasoline (DIG) Injector Deposit Control,” SAE Technical Paper 2000-01-2020 2000 10.4271/2000-01-2020
  15. DuMont, R. Evans, J. Feist, D. Studzinski, W. et al. “Test and Control of Fuel Injector Deposits in Direct Injected Spark Ignition Vehicles,” SAE Technical Paper 2009-01-2641 2009 10.4271/2009-01-2641
  16. Lindgren, R. Skogsberg, M. Sandquist, H. Denbratt, I. “The Influence of Injector Deposits on Mixture Formation in a DISC SI Engine,” SAE Technical Paper 2003-01-1771 2003 10.4271/2003-01-1771
  17. Aradi, A. Evans, J. Miller, K. Hotchkiss, A. “Direct Injection Gasoline (DIG) Injector Deposit Control with Additives,” SAE Technical Paper 2003-01-2024 2003 10.4271/2003-01-2024
  18. China, P. Rivere, J. “Development of a Direct Injection Spark Ignition Engine Test for Injector Fouling,” SAE Technical Paper 2003-01-2006 2003 10.4271/2003-01-2006
  19. Von Bacho, P. Sofianek, J. Galante-Fox, J. McMahon, C. “Engine Test for Accelerated Fuel Deposit Formation on Injectors Used in Gasoline Direct Injection Engines,” SAE Technical Paper 2009-01-1495 2009 10.4271/2009-01-1495
  20. Smith, D. “Report on the Work of the CEC / CRC / OACIS Task Force on the Development of a Test Method to Evaluate Fuel Quality with Respect to Injector Fouling indirect Injection Gasoline Engines,” 3 April 2007
  21. Von Bacho, P. Galante-Fox, J. Sant, D. “Development of a Robust Injector Design for Superior Deposit Resistance,” SAE Technical Paper 2005-01-3841 2005 10.4271/2005-01-3841
  22. Rivera, E. Mastro, N. Zizelman, J. Kirwan, J. et al. “Development of Injector for the Direct Injection Homogeneous Market using Design for Six Sigma,” SAE Technical Paper 2010-01-0594 2010 10.4271/2010-01-0594

Cited By

Recommended Content

Technical Paper Application of DLC Coating in Cylinder Liners for Friction Reduction
Technical Paper Development of a Novel Numerical Methodology for the Assessment of Insulating Coating Performance in Internal Combustion Engines
Journal Article Experimental and Analytical Study of Temperature Swing Piston Coatings in a Medium-Duty Diesel Engine