Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Study of High Speed Gasoline Direct Injection Compression Ignition (GDICI) Engine Operation in the LTC Regime

Journal Article
2011-01-1182
ISSN: 1946-3936, e-ISSN: 1946-3944
DOI: https://doi.org/10.4271/2011-01-1182
Published April 12, 2011 by SAE International in United States
Study of High Speed Gasoline Direct Injection Compression Ignition (GDICI) Engine Operation in the LTC Regime
Sector:
Citation: Ra, Y., Loeper, P., Reitz, R., Andrie, M. et al., "Study of High Speed Gasoline Direct Injection Compression Ignition (GDICI) Engine Operation in the LTC Regime," SAE Int. J. Engines 4(1):1412-1430, 2011, https://doi.org/10.4271/2011-01-1182.
Language: English

References

  1. Iwabuchi, Y. Kawai, K. Shoji, T. Takeda, Y. “Trial of New Concept Diesel Combustion System: Premixed Compression-Ignited Combustion,” SAE Technical Paper 1999-01-0185 1999 10.4271/1999-01-0185
  2. Kanda, T. Hakozaki, T. Uchimoto, T. Hatano, J. Kitayama, N. Sono, H. “PCCI Operation with Early Injection of Conventional Diesel Fuel,” SAE Technical Paper 2005-01-0378 2005 10.4271/2005-01-0378
  3. Opat, R. Ra, Y. Gonzalez, M.A. Krieger, R.B. Reitz, R.D. Foster, D.E. Durrett, R.P. Siewert, R.M. “Investigation of Mixing and Temperature Effects on HC/CO Emissions for Highly Dilute Low Temperature Combustion in a Light Duty Diesel Engine,” SAE Technical Paper 2007-01-0193 2007 10.4271/2007-01-0193
  4. Krieger, R.B. Siewert, R.M. Pinson, J.A. Gallopoulos, N.A. et al. “Diesel Engines: One Option to Power Future Personal Transportation Vehicles,” SAE Technical Paper 972683 1997 10.4271/972683
  5. Kimura, S. Aoki, O. Ogawa, H. Muranaka, S. Enomoto, Y. “New Combustion Concept for Ultra-Clean and High-Efficiency Small DI Diesel Engines,” SAE Technical Paper 1999-01-3681 1999 10.4271/1999-01-3681
  6. Kimura, S. Aoki, O. Kitahara, Y. Aiyoshizawa, E. “Ultra-Clean Combustion Technology Combining a Low-Temperature and Premixed Combustion Concept for Meeting Future Emission Standards,” SAE Technical Paper 2001-01-0200 2001 10.4271/2001-01-0200
  7. Kimura, S. Ogawa, H. Matsui, Y. Enomoto, Y. “An experimental analysis of low temperature and premixed combustion for simultaneous reduction of of NOx and particulate emissions in DI diesel engines,” Int. J. Engine Research 3 249 259 2002
  8. Hashizume, T. Miyamoto, T. Akagawa, H. Tsujimura, K. “Combustion and Emission Characteristics of Multiple Stage Diesel Combustion,” SAE Technical Paper 980505 1998 10.4271/980505
  9. Neely, G.D. Sasaki, S. Huang, Y. Leet, J.A. Stewart, D.W. “New Diesel Emission Control Strategy to Meet US Tier 2 Emissions Regulations,” SAE Technical Paper 2005-01-1091 2005 10.4271/2005-01-1091
  10. Shimazaki, N. Tsurushima, T. Nishimura, T. “Dual Mode Combustion Concept with Premixed Diesel Combustion by Direct Injection Near Top Dead Center,” SAE Technical Paper 2003-01-0742 2003 10.4271/2003-01-0742
  11. Risberg, P. Kalghatgi, G. Ångström, H-E Wåhlin, F. “Auto-Ignition Quality of Diesel-Like Fuels in HCCI Engines,” SAE Technical Paper 2005-01-2127 2005 10.4271/2005-01-2127
  12. Kalghatgi, G.T. “Auto-Ignition Quality of Practical Fuels and Implications for Fuel Requirements of Future SI and HCCI Engines,” SAE Technical Paper 2005-01-0239 2005 10.4271/2005-01-0239
  13. Kalghatgi, G. T. Risberg, P. Ångström, H-E. “Advantages of Fuels with High Resistance to Auto-Ignition in Late-Injection, Low-Temperature, Compression Ignition Combustion,” SAE Technical Paper 2006-01-3385 2006 10.4271/2006-01-3385
  14. Kalghatgi, G. T. Risberg, P. Ångström, H-E. “Partially Pre-Mixed Auto-Ignition of Gasoline to Attain Low Smoke and Low NOx at High Load in a Compression Ignition Engine and Comparison with a Diesel Fuel,” SAE Technical Paper 2007-01-0006 2007 10.4271/2007-01-0006
  15. Weall, A.J. Collings, N. “Investigation into Partially Premixed Combustion in a Light Duty Multi-Cylinder Diesel Engine Fuelled with a Mixture of Gasoline and Diesel,” SAE Technical Paper 2007-01-4058 2007 10.4271/2007-01-4058
  16. Hildingsson, L. Kalghatgi, G. Tait, N. Johansson, B. Harrison, A. “Fuel Octane Effects in the Partially Premixed Combustion Regime in Compression Ignition Engines,” SAE Technical Paper 2009-01-2648 2009 10.4271/2009-01-2648
  17. Ra, Y. Yun, J. E. Reitz, R.D. “Numerical simulation of diesel and gasoline-fueled compression ignition combustion with high pressure late direct injection,” Int. J. Vehicle Design 50 1/2/3/4 3 34 2009
  18. Ra, Y. Yun, J.E. Reitz, R.D. Numerical Parametric Study of Diesel Engine Operation with Gasoline Combust. Sci. and Tech. 181 350 378 2009
  19. Amsden, A.A. “KIVA-3V, Release 2, Improvements to KIVA-3V,” LA-UR-99-915 1999
  20. Kee, R.J. Rupley, F.M. Miller, J.A. “CHEMKIN-II: A FORTRAN Chemical Kinetics Package for the Analysis of Gas Phase Chemical Kinetics,” Sandia Report SAND 89-8009 1989
  21. Beale, J.C. Reitz, R.D. “Modeling Spray Atomization with the Kelvin-Helmholtz/Rayleigh-Taylor Hybrid Model Atomization and Sprays 9 623 650 1999
  22. Liu, A.B. Mather, D. Reitz, R.D. “Modeling the Effects of Drop Drag and Breakup on Fuel Sprays,” SAE Technical Paper 930072 1993 10.4271/930072
  23. Ra, Y. Reitz, R.D. “A vaporization model for discrete multi-component fuel sprays,” Int. J. Multiphase Flow 35 101 117 2009
  24. O'Rourke, P.J. Amsden, A.A. “A Particle Numerical Model for Wall Film Dynamics in Port-Injected Engines,” SAE Technical Paper 961961 1996 10.4271/961961
  25. Han, Z. Reitz, R.D. “Turbulence Modeling of Internal Combustion Engines Using RNG k-e models,” Comb. Sci. Tech. 106 267 295 1995
  26. Ra, Y. Reitz, R.D. “A Reduced Chemical Kinetic Model for IC Engine Combustion Simulations with Primary Reference Fuels,” Combustion and Flame 155 713 738 2008
  27. Hessel, R. P. Foster, D. E. Aceves, S. M. Davisson, M. L. Espinosa-Loza, F. Flowers, D. L. Pitz, W. J. Dec, J. E. Sjöberg, M. Babajimopoulos, A. “Modeling Iso-octane HCCI using CFD with Multi-Zone Detailed Chemistry; Comparison to Detailed Speciation Data over a Range of Lean Equivalence Ratios,” SAE Technical Paper 2008-01-0047 2008 10.4271/2008-01-0047
  28. Genzale, C. L. Reitz, R. D. Musculus, M. P. B. “Measurements of Mixture Effects on Late-Injection Low-Temperature Diesel Combustion in a Heavy-Duty Diesel Engine,” SAE Int. J. Engines 1 1 913 937 2008 10.4271/2008-01-1330
  29. Fieweger, K. Blumenthal, R. Adomeit, G. “Serf-Ignition of S.I. Engine Model Fuels: A Shock Tube Investigation at High Pressure,” Combustion and Flame 109 599 619 1997
  30. Hiroyasu, H. Kadota, T. “Models for Combustion and Formation of Nitric Oxide and Soot in DI Diesel Engines,” SAE Technical Paper 760129 1976 10.4271/760129
  31. Koci, C.P. Ra, Y. Krieger, R. Andrie, M. et al. “Detailed Unburned Hydrocarbon Investigations in a Highly Dilute Diesel Low Temperature Combustion Regime,” SAE Int. J. Engines 2 1 858 879 2009 10.4271/2009-01-0928
  32. Private communication with Russell Durrett August 2009
  33. Dempsey, A.B. Reitz, R.D. “Computational Optimization of a Heavy-Duty Compression Ignition Engine Fueled with Conventional Gasoline” SAE Int. J. Engines 4 1 352 373 2011 10.4271/2011-01-0356

Cited By

Recommended Content

Technical Paper Effects of Mixing and Chemical Parameters on Homogeneous Charge Induced Ignition Combustion Based on a Light-Duty Diesel Engine with Ultra-Low NOx and Soot Emissions and High Thermal Efficiency
Technical Paper Investigation of EGR and Miller Cycle for NOx Emissions and Exhaust Temperature Control of a Heavy-Duty Diesel Engine
Technical Paper Effect of EGR on Performance and Emissions in a Diesel Engine Fuelled with Jatropha Oil Methyl Ester