This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Effect of EGR on Particle Emissions from a GDI Engine
Journal Article
2011-01-0636
ISSN: 1946-3936, e-ISSN: 1946-3944
Sector:
Topic:
Citation:
Hedge, M., Weber, P., Gingrich, J., Alger, T. et al., "Effect of EGR on Particle Emissions from a GDI Engine," SAE Int. J. Engines 4(1):650-666, 2011, https://doi.org/10.4271/2011-01-0636.
Language:
English
References
- Khalek, I.A. Bougher, T. Jetter, J.J. “Particle Emissions from a 2009 Gasoline Direct Injection Engine Using Different Commercially Available Fuels,” SAE Int. J. Fuels Lubr. 3 2 623 637 2010 10.4271/2010-01-2117
- Alger, T. Huang, Y. Hall, M. Matthews, R.D. “Liquid Film Evaporation Off the Piston of a Direct Injection Gasoline Engine,” SAE Technical Paper 2001-01-1204 2001 10.4271/2001-01-1204
- Huang, Y. Alger, T. Matthews, R. Ellzey, J. “The Effects of Fuel Volatility and Structure on HC Emissions from Piston Wetting in DISI Engines,” SAE Technical Paper 2001-01-1205 2001 10.4271/2001-01-1205
- Stevens, E. Steeper, R. “Piston Wetting in an Optical DISI Engine: Fuel Films, Pool Fires, and Soot Generation,” SAE Technical Paper 2001-01-1203 2001 10.4271/2001-01-1203
- Mehta, D. Alger, T. Hall, M. Matthews, R. et al. “Particulate Characterization of a DISI Research Engine Using a Nephelometer and In-Cylinder Visualization,” SAE Technical Paper 2001-01-1976 2001 10.4271/2001-01-1976
- Grebe, U. et al. 2008 “Differentiated Analysis of Downspeeding Concepts” Internationales Wiener Motorensymposium 2008
- Alger, T. Hall, M. Matthews, R.D. “Effects of Swirl and Tumble on In-Cylinder Fuel Distribution in a Central Injected DISI Engine,” SAE Technical Paper 2000-01-0533 2000 10.4271/2000-01-0533
- Davy, M.H. Williams, P.A. Anderson, R.W. “Effects of Injection Timing on Liquid-Phase Fuel Distributions in a Centrally-Injected Four-Valve Direct-Injection Spark-Ignition Engine,” SAE Technical Paper 982699 1998 10.4271/982699
- Ghandhi, J.B. Bracco, F.V. “Mixture Preparation Effects on Ignition and Combustion in a Direct-Injection Spark-Ignition Engine,” SAE Technical Paper 962013 1996 10.4271/962013
- Han, Z. Reitz, R.D. Yang, J. Anderson, R.W. “Effects of Injection Timing on Air-Fuel Mixing in a Direct-Injection Spark-Ignition Engine,” SAE Technical Paper 970625 1997 10.4271/970625
- Li, J. et al. Liquid Fuel Impingement on In-cylinder Surfaces as a Source of Hydrocarbon Emissions from Direct Injection Gasoline Engines Fuels Combustion and Lubricants 2000
- Khalek, I.A. “Sampling System for Solid and Volatile Exhaust Particle Size, Number, and Mass Emissions,” SAE Technical Paper 2007-01-0307 SAE Transactions - Journal of Fuels and Lubricants 2007 10.4271/2007-01-0307
- Alger, T. Chauvet, T. Dimitrova, Z. “Synergies between High EGR Operation and GDI Systems,” SAE Int. J. Engines 1 1 101 114 2008 10.4271/2008-01-0134
- Cairns, A. Blaxill, H. Irlam, G. “Exhaust Gas Recirculation for Improved Part and Full Load Fuel Economy in a Turbocharged Gasoline Engine,” SAE Technical Paper 2006-01-0047 2006 10.4271/2006-01-0047
- Duchaussoy, Y. Lefebvre, A. Bonetto, R. “Dilution Interest on Turbocharged SI Engine Combustion,” SAE Technical Paper 2003-01-0629 2003 10.4271/2003-01-0629
- Alger, T. Mangold, B. “Dedicated EGR: A New Concept in High Efficiency Engines,” SAE Int. J. Engines 2 1 620 631 2009 10.4271/2009-01-0694
- Weinowski, R. et al 2009 “Future downsizing of S.I. engines - potentials and limits of 2- and 3-cylinder concepts,” Internationales Wiener Motorensymposium 2009
- Morris, G. et al 2009 “A New Engine Boosting Concept with Energy Recuperation for Micro/Mild Hybrid Applications,” 22 nd International AVL Conference: Engine & Environment 2010
- Alger, T. Gingrich, J. Khalek, I.A. Mangold, B. “The Role of EGR in PM Emissions from Gasoline Engines,” SAE Int. J. Fuels Lubr. 3 1 85 98 2010 10.4271/2010-01-0353
- Khalek, I.A. Kittelson, D.B. Brear, F. “Nanoparticle Growth During Dilution and Cooling of Diesel Exhaust: Experimental Investigation and Theoretical Assessment,” SAE Technical Paper 2000-01-0515 2000 10.4271/2000-01-0515
- Graskow, B.R. Ahmadi, M.R. Morris, J.E. Kittelson, D.B. “Influence of Fuel Additives and Dilution Conditions on the Formation and Emission of Exhaust Particulate Matter from a Direct Injection Spark Ignition Engine,” SAE Technical Paper 2000-01-2018 2000 10.4271/2000-01-2018
- Samuel, S. Hassaneen, A. Morrey, D. “Particulate Matter Emissions and the Role of Catalytic Converter During Cold Start of GDI Engine,” SAE Technical Paper 2010-01-2122 2010 10.4271/2010-01-2122
- Storey, J.M. Barone, T. Norman, K. Lewis, S. “Ethanol Blend Effects On Direct Injection Spark-Ignition Gasoline Vehicle Particulate Matter Emissions,” SAE Technical Paper 2010-01-2129 2010 10.4271/2010-01-2129
- Hinds “Aerosol Technology Properties, Behavior, and Measurement of Airborne Particles,” 1982
- Braisher, M. Stone, R. Price, P. “Particle Number Emissions from a Range of European Vehicles,” SAE Technical Paper 2010-01-0786 2010 10.4271/2010-01-0786
- Kayes, D. Hochgreb, S. 1999 “Mechanisms of Particulate Matter formation in Spark-ignition Engines. 1. Effect of Engine Operating Conditions,” Environmental Science and Technology 33 3957 3967 1999
- Abdul-Khalek, I.S. Kittelson, D.B. “Real Time Measurement of Volatile and Solid Exhaust Particles Using a Catalytic Stripper,” SAE Technical Paper 950236 1995 10.4271/950236
- Maricq, M.M. Munoz, R.H. Yang, J. Anderson, R.W. “Sooting Tendencies in an Air-Forced Direct Injection Spark-Ignition (DISI) Engine,” SAE Technical Paper 2000-01-0255 2000 10.4271/2000-01-0255
- Favre, C. Bosteels, D. May, J. De Souza, I. et al. “An Emissions Performance Evaluation of State-of-the-Art Motorcycles Over Euro 3 and WMTC Drive Cycles,” SAE Technical Paper 2009-01-1841 2009 10.4271/2009-01-1841
- Farnlund, J. Homan, C. Kageson, P. 2001 “Emissions of Ultrafine Particles from Different Types of Light Duty Vehicles,” Swedish National Road Administration 2001
Cited By
Recommended Content
Journal Article | The Role of EGR in PM Emissions from Gasoline Engines |
Technical Paper | Exhaust Particle Sensor for OBD Application |
Technical Paper | Challenges for the Next Generation of BlueTEC Emission Technology |