Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Crash Performance Simulation of a Multilayer Thermoplastic Fuel Tank with Manufacturing and Assembly Consideration

Journal Article
2011-01-0009
ISSN: 1946-3979, e-ISSN: 1946-3987
DOI: https://doi.org/10.4271/2011-01-0009
Published April 12, 2011 by SAE International in United States
Crash Performance Simulation of a Multilayer Thermoplastic Fuel Tank with Manufacturing and Assembly Consideration
Sector:
Citation: Craig, R., Qu, T., Pan, L., Tyan, T. et al., "Crash Performance Simulation of a Multilayer Thermoplastic Fuel Tank with Manufacturing and Assembly Consideration," SAE Int. J. Mater. Manuf. 4(1):27-39, 2011, https://doi.org/10.4271/2011-01-0009.
Language: English

References

  1. Wang, Z. Rakheja, S. Sun, C. “Influence of Partition Location on the Braking Performance of a Partially-Filled Tank Truck,” SAE Technical Paper 952639 1995 10.4271/952639
  2. Kang, X. Rakheja, S. Stiharu, I. “Directional Dynamics of a Partly-Filled Tank Vehicle under Braking and Steering,” SAE Technical Paper 2000-01-3477 2000 10.4271/2000-01-3477
  3. Dutta, S. Laha, M. K. “Analysis of the small amplitude sloshing of a liquid in a rigid container of arbitrary shape using a low-order boundary element method” Int. J. Numer. Meth. Engng. 47 1633 1648 2000
  4. Hayashi, K. Mikami, M. Miura, K. “Development of Multi-Layer Plastic Membrane (Bladder Membrane) for Vapor Reducing Fuel Tank,” SAE Technical Paper 2001-01-1120 2001 10.4271/2001-01-1120
  5. Banerjee, R. Isaac, M. Oliver, L. Breig, W. “A Numerical Study of Automotive Gas Tank Filler Pipe Two Phase Flow,” SAE Technical Paper 2001-01-0732 2001 10.4271/2001-01-0732
  6. Banerjee, R. Bai, X. Pugh, D. Isaac, K.M. et al. “CFD Simulations of Critical Components in Fueling Systems,” SAE Technical Paper 2002-01-0573 2002 10.4271/2002-01-0573
  7. Kamiya, K. Yamaguchi, Y. de Vries, E. “Simulation Studies of Sloshing in a Fuel Tank,” SAE Technical Paper 2002-01-0574 2002 10.4271/2002-01-0574
  8. IU, H.S Cleghorn, W.L. Mills, J. K. “Design and Analysis of Fuel Tank Baffles to Reduce the Noise Generated from Fuel Sloshing,” SAE Technical Paper 2004-01-0403 2004 10.4271/2004-01-0403
  9. Ma, J. Usman, M. “Modeling of Fuel Sloshing Phenomena Considering Solid-Fluid Interaction” 8th International LS-DYNA User Conference
  10. Roh, W-J. Cho, S.-H. Park, J. I. “Simulation of Sloshing in Fuel Tanks and Parametric Study on Noise Reduction by Decreasing Impact Pressure,” SAE Technical Paper 2005-01-1913 2005 10.4271/2005-01-1913
  11. Kamel, M. Hanai, J. Fukasawa, W. Makino, T. “Establishment of a Method for Predicting and Confirming Fuel Tank Sloshing Noise,” SAE Technical Paper 2007-01-1538 2007 10.4271/2007-01-1538
  12. Song, G. G. Shu, K-T. Khatib-Shahidi, B. Ourchane, A. Liu, Y. “Nonlinear Dynamic Simulatin of Fuel Tank Strap Stress and Fatigue Life under Proving Ground Conditions,” SAE Technical Paper 2005-01-0979 2005 10.4271/2005-01-0979
  13. Qin, P. D'Souza, S. F. “CAE Fatigue Prediction of Fuel Tank Straps Using Proving Ground Loads,” SAE Technical Paper 2005-01-1405 2005 10.4271/2005-01-1405
  14. Himeki, H. Kumagai, H. Morohoshi, K. “Fatigue Behavior Analysis and Durability Evaluation of Plastic Fuel Tank,” SAE Technical Paper 2006-01-0782 2006 10.4271/2006-01-0782
  15. van der Veen, W. A. “Crushing Simulation of a Partially Filled Fuel Tank Beyond Failure,” SAE Technical Paper 2005-01-1426 2005 10.4271/2005-01-1426
  16. Ding, P. Buijk, A. J. van der Veen, W. A. “Simulation of Fuel Tank Filling Using a Multi-material Euler Solver with Multiple Adaptive Domains,” SAE Technical Paper 2005-01-1915 2005 10.4271/2005-01-1915
  17. Tang, B.-R. Guha, S. Tyan, T. Doong, J. Shaner, L. Bhalsod, D. “Simulation of Sloshing and Ballooning in Fuel Tanks for High Speed Impacts,” SAE Technical Paper 2006-01-0314 2006 10.4271/2006-01-0314
  18. Matteo, L. D. Fortunato, F. Oliva, P. Fiore, N. Martinett, M. “Sloshing Analysis of an Automotive Fuel Tank,” SAE Technical paper 2006-01-1006 2006 10.4271/2006-01-1006
  19. Benrabah, Z. Thibault, F. DiRaddo, R. “Finite Element Modeling of Fuel Emission for Thermoplastic Multilayer Fuel Tanks with Optimization of Barrier Properties,” SAE Technical Paper 2006-01-0625 2006 10.4271/2006-01-0625
  20. Chang, J. Tyan, T. El-bkaily, M. Marpu, A. Zhang, Q. Santini, J. “Implicit and Explicit Finite Element Methods for Crash Safety Analysis,” SAE Technical Paper 2007-01-0982 2007 10.4271/2007-01-0982
  21. Craig, R. Chen, Y. Tyan, T. Laya, J. Cheng, J. “Finite Element Modeling of the Frame for Body-on-Frame Vehicle, Part I - Subsystem Investigation,” SAE Technical Paper 2004-01-0688 2004 10.4271/2004-01-0688
  22. Chen, Y. Craig, R. Tyan, T. Laya, J. Cheng, J. “Finite Element Modeling of the Frame for Body-on-Frame Vehicle, Part II - Full Vehicle Crash,” SAE Technical Paper 2004-01-0689 2004 10.4271/2004-01-0689
  23. Gao, R. Xi, C. Tyan, T. Mahadevan, K. Doong, J. “A Practical Approach to Consider Forming Effects for Full Vehicle Crash Application,” SAE Technical Paper 2009-01-0471 2009 10.4271/2009-01-0471
  24. Gao, R. Pan, L. Tyan, T. Mahadevan, K. Ghouati, O. Lanzerath, H. Kessen, M. “Impact Simulation of Hydro-formed Front End Vehicle Structure,” SAE Technical Paper 2006-01-0312 2006 10.4271/2006-01-0312
  25. Gonzalez Noble, M. Huang, M. Tyan, T. Shaner, L. Ghouati, O. Lanzerath, H. Wu, B. Dombek, B. “Testing and Finite Element Modeling of Hydroform Frames in Crash Applications,” SAE Technical Paper 2007-01-0981 2007 10.4271/2007-01-0981

Cited By

Recommended Content

Technical Paper An Efficient Solution for Hard or Soft Seamless Airbag Systems
Technical Paper Simulation of Softening and Rupture in Multilayered Fuel Tank Material
Journal Article Reliability Evaluation of Thin, Lightweight Laminates for Windshield Applications