Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

3-Cylinder Turbocharged Gasoline Direct Injection: A High Value Solution for Low CO2 and NOx Emissions

Journal Article
2010-01-0590
ISSN: 1946-3936, e-ISSN: 1946-3944
DOI: https://doi.org/10.4271/2010-01-0590
Published April 12, 2010 by SAE International in United States
3-Cylinder Turbocharged Gasoline Direct Injection: A High Value Solution for Low CO2 and NOx Emissions
Sector:
Citation: Kirwan, J., Shost, M., Roth, G., and Zizelman, J., "3-Cylinder Turbocharged Gasoline Direct Injection: A High Value Solution for Low CO2 and NOx Emissions," SAE Int. J. Engines 3(1):355-371, 2010, https://doi.org/10.4271/2010-01-0590.
Language: English

References

  1. DRI Survey July 2009
  2. Coltman, D. Turner, J.W.G. Curtis, R. Blake, D. et al. “Project Sabre: A Close-Spaced Direct Injection 3-Cylinder Engine with Synergistic Technologies to Achieve Low CO 2 Output,” SAE Int. J. Engines 1 1 129 146 2008
  3. Korte, V. Blaxill, H. Lumsdenm G. Hancock, D. “Downsizing - Realized with a 1.2 l 3-Cylinder Engine,” the 17th Aachener Kolloquium Fahrzeug- und Motorenrechnik Germany 2008
  4. Fraser, N. Blaxill, H. Lumsden, G. Bassett, M. “Challenges for Increased Efficiency through Gasoline Engine Downsizing,” SAE Int. J. Engines 2 1 991 1008 2009
  5. Lumsden, G. OudeNijeweme, D. Fraser, N. Blaxill, H. “Development of a Turbocharged Direct Injection Downsizing Demonstrator Engine,” SAE Int. J. Engines 2 1 1420 1432 2009
  6. Weinowski, R. Sehr, A. Wedowski, S. Heuer, S. Hamm, T. Tiemann, C. “Future Downsizing of S.I. Engines - Potentials and Limits of 2- and 3-Cylinder Concepts,” 30th Vienna Motor Symposium Austria 2009
  7. Lutterman, C. Mährle, W. “BMW High Precision Fuel Injection in Conjunction with Twin-Turbo Technology: a Combination for Maximum Dynamic and High Fuel Efficiency,” SAE Technical Paper 2007-01-1560 2007
  8. Königstein, A. Larsson, P.-I. Grebe, U. D. Wu, K.-J. “Differentiated Analysis of Downsizing Concepts,” 29th Vienna Motor Symposium Austria 2008
  9. Yi, J. Wooldridge, S. Coulson, G. Hilditch, J. et al. “Development and Optimization of the Ford 3.5L V6 EcoBoost Combustion System,” SAE Int. J. Engines 2 1 1388 1407 2009
  10. Klauer, N. Klüting, M. Steinparzer, F. Unger, H. “Turbocharging and Variable Valve Trains - Fuel Reducing Technologies for Worldwide Use,” 30th Vienna Motor Symposium Austria 2009
  11. Lee, H. S. “Hyundai-Kia's Powertrain Strategy for Green and Sustainable Mobility,” 30th Vienna Motor Symposium Austria 2009
  12. Böhme, J. Müller, H. Ganz, M. Marques, M. “The New Five Cylinder 2.5l TFSI Engine for the Audi TT RS,” 30th Vienna Motor Symposium Austria 2009
  13. Lückert, P. Kreitmann, F. Merdes, N. Weller, R. Rehberger, A. Bruchner, K. Schwedler, K. Ottenbacher, H. Keller, T. “The New 1.8-Litre 4-Cylinder Petrol Engine with Direct Injection and Turbocharging for All Passenger Cars with Standard Drivetrains from Mercedes-Benz,” 30th Vienna Motor Symposium Austria 2009
  14. Hadler, J. Szengel, R. Middendorf, H. Kuphal, A. Siebert, W. Hentschel, L. “Minimum Consumption - Maximum Force: TSI Technology in the New 1.2l Engine from Volkswagen,” 30th Vienna Motor Symposium Austria 2009
  15. Lang, O. Habermann, K. Krebber-Hortmann, K. Sehr, A. et al. “Potential of the Spray-guided Combustion System in Combination with Turbocharging,” SAE Technical Paper 2008-01-0139 2008
  16. Marriott, C.D. Wiles, M.A. Gwidt, J.M. Parrish, S.E. “Development of a Naturally Aspirated Spark Ignition Direct-Injection Flex-Fuel Engine,” SAE Int. J. Engines 1 1 267 295 2008
  17. Kapus, P.E. Fuerhapter, A. Fuchs, H. Fraidl, G.K. “Ethanol Direct Injection on Turbocharged SI Engines - Potential and Challenges,” SAE Technical Paper 2007-01-1408 2007
  18. Das, S. Chang, S.-I. Kirwan, J. “Spray Pattern Recognition for Multi-Hole Gasoline Direct Injectors using CFD Modeling,” SAE Technical Paper 2009-01-1488 2009
  19. Husted, H.L. Piock, W. Ramsay, G. “Fuel Efficiency Improvements from Lean, Stratified Combustion with a Solenoid Injector,” SAE Int. J. Engines 2 1 1359 1366 2009
  20. Befrui, B. Corbinelli, G. Hoffmann, G. Andrews, R.J. et al. “Cavitation and Hydraulic Flip in the Outward-Opening GDi Injector Valve-Group,” SAE Technical Paper 2009-01-1483 2009
  21. Piock, W. Weyand, P. Heise, V. Wolf, E. “The Ignition Challenge for Stratified Combustion Systems,” Der Arbietsprozess Des Verbrennungmotors Graz, Austria 2009
  22. Weyand, P. Weiten, C. Piock, W. F. Schilling, S. “Adaptive Multi Charge Ignition for Critical Combustion Conditions” MTZ 2007
  23. Heil, B. Weining, H.K. Karl, G. Panten, D. Wunderlich, K. “Verbrauch und Emissionen - Reduzierungskonzepte beim Ottomotor,” MTZ 2001
  24. Cairns, A. Fraser, N. Blaxill, H. “Pre Versus Post Compressor Supply of Cooled EGR for Full Load Fuel Economy in Turbocharged Gasoline Engines,” SAE Technical Paper 2008-01-0425 2008
  25. Turner, J.W.G. Pearson, R.J. Curtis, R. Holland, B. “Improving Fuel Economy in a Turbocharged DISI Engine Already Employing Integrated Exhaust Manifold Technology and Variable Valve Timing,” SAE Technical Paper 2008-01-2449 2008
  26. Hendriksma N. Kunz, T. Greene, C. “Design and Development of a 2-Step Rocker Arm,” SAE Technical Paper 2007-01-1285 2007
  27. Schöppe, D. Zülch, S. Geurts, D. Gris, C. Jorach, R. W. “Delphi's New Direct Acting Common Rail Injection System,” 30th Vienna Motor Symposium Austria 2009

Cited By

Recommended Content

Technical Paper A Real-Time Control Framework for Integrated Diesel Engine and Selective Catalytic Reduction System
Technical Paper Development and Experimental Validation of a Control Oriented Model of a Catalytic DPF
Technical Paper Diesel Exhaust Treatment - New Approaches to Ultra Low Emission Diesel Vehicles