Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Experimental Analysis of Die Wear in Sheet Metal Forming

Journal Article
2009-01-1171
ISSN: 1946-3979, e-ISSN: 1946-3987
DOI: https://doi.org/10.4271/2009-01-1171
Published April 20, 2009 by SAE International in United States
Experimental Analysis of Die Wear in Sheet Metal Forming
Sector:
Citation: Zhou, R., AlAli, I., Cao, J., Wang, Q. et al., "Experimental Analysis of Die Wear in Sheet Metal Forming," SAE Int. J. Mater. Manf. 2(1):465-471, 2009, https://doi.org/10.4271/2009-01-1171.
Language: English

References

  1. Application of Advanced High Strength Steels in automotive industry from the web page: http://www.ussautomotive.com/auto/tech/grades/complex_phase.htm
  2. Rabinowicz, E. Friction and Wear of Materials Second Edition John Wiley & Sons, Inc. Canada 1995
  3. Test method for wear testing using a pin-on-disk apparatus ASTM Annual Book of Standards 03.02 West Conshohocken, PA 1995
  4. Blau, P. J. Budinski, K. G. “Development and use of ASTM standards for wear testing” Wear 225–229 1159 1170 1999
  5. Test method for galling resistance of materials ASTM Annual Book of Standards 03.02 West Conshohocken, PA 1991
  6. Test method of ranking resistance of plastic materials to sliding wear using a block-on-ring configuration ASTM Annual Book of Standards 03.02 West Conshohocken, PA 2000
  7. Swanson, A. M. “Experimental Investigation of Die Wear with Nanoscale Accuracy” M.S. Thesis Northwestern University Evanston, United States 2006
  8. Hortig, D. Schmoeckel, D. “Analysis of local loads on the draw die profile with regard to wear using the FEM and experimental investigations” Journal of Materials Processing Technology 115 153 158 2001
  9. Boher, C. Attaf, D. Penazzi, L. Levaillant, C. “Wear behaviour on the radius portion of a die in deep-drawing: Identification, localization and evolution of the surface damage” Wear 259 1097 1108 2005
  10. Shaw, M.C. “Dimensional analysis for wear systems” Wear 43 263 266 1977
  11. Meng, H.C. Ludema, K.C “Wear models and predictive equations: their form and content” Wear 181–183 443 457 1995
  12. Sivebaek, I. M. Sorenson, S.C. Jakobsen, J. “Dimethyl Ether: New Advances in Wear Testing: Theoretical and Experimental Results” SAE Powertrain & Fluid Systems Conference & Exhibition 2003
  13. Heide, E. van der, Stam, E.D. Giraud, H. Lovato, G. Akdut, N. Clarysse, F. Caenen, P. Heikillä, I. “ Wear of aluminum bronze in sliding contact with lubricated stainless steel sheet material” Wear 261 68 73 2006
  14. Xia, Z.C. Ren, F. “Die Wear Severity Diagram and Simulation” SAE 116 5 2007
  15. Jensen, M.R. Damborg, F.F. Nielsen, K.B. Danckert, J. “Applying the finite element method for determination of tool wear in conventional deep-drawing” J. Mater. Process. Technol. 83 98 105 1998
  16. Chen, W Wang, Q “A Numerical Model for the Point Contact of Dissimilar Materials Considering Tangential Tractions,” Mechanics of Materials 40 936 948 2008
  17. Liu, S. Wang, Q. “A Three-Dimensional Thermomechanical Model of Contact between NonConforming Rough Surfaces,” ASME Journal of Tribology 123 17 26 2001
  18. Ao, Y. Wang, Q. Chen, P. “Simulating the Worn Surface in a Wear Process,” Wear 252 37 47 2002
  19. Ma, X. Liu, R. Li, D.Y. “Abrasive wear behavior of D2 tool steel with respect to load and sliding speed under dry sand/rubber wheel abrasion condition” Wear 241 79 85 2000

Cited By

Recommended Content

Technical Paper Resistance Spot Welding Evaluation of Transformation Induced Plasticity 780 (TRIP780) Steel for Automotive Body Structural Applications
Technical Paper Achieving Light-Weight Design of Automotive Bodies with Advanced High Strength Steels via Structural Optimization
Journal Article Analysis of Trimming Processes for Advanced High Strength Steels