This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Challenges for Increased Efficiency through Gasoline Engine Downsizing

Journal Article
2009-01-1053
ISSN: 1946-3936, e-ISSN: 1946-3944
Published April 20, 2009 by SAE International in United States
Challenges for Increased Efficiency through Gasoline Engine Downsizing
Sector:
Citation: Fraser, N., Blaxill, H., Lumsden, G., and Bassett, M., "Challenges for Increased Efficiency through Gasoline Engine Downsizing," SAE Int. J. Engines 2(1):991-1008, 2009, https://doi.org/10.4271/2009-01-1053.
Language: English

References

  1. EC “2005-2006 CO2 Monitoring report database” April 2008 http://ec.europa.eu/environment/air/transport/co2/co2_monitoring.htm
  2. Heywood J.B. Kasseris E.P. “Comparative Analysis of Automotive Powertrain Choices for the Next 25 Years” SAE Paper 2007-01-1605 2007
  3. CONCAWE EUCAR ECJRC (EUWTW) “Well-to-Wheels Analysis of Future Automotive Fuels and Powertrains in the European Context- Well-to Wheels Report March 2007 http://ies.jrc.cec.eu.int/wtw.html
  4. Louis J.J.J. “Well-To-Wheel Energy Use and Greenhouse Gas Emissions for Various Vehicle Technologies” SAE Paper 2001-01-1343 2001
  5. Ito N. Ohta T. Kono R. Arikawa S. Matsumoto T. “Development of a 4-Cylinder Gasoline Engine with a Variable Flow Turbo-charger” SAE Paper 2007-01-0263 2007
  6. Han Donghee Han Seung-Kook Han Bong-Hoon Kim Woo-Tae “Development of 2.0L Turbocharged DISI Engine for Downsizing Application” SAE Paper 2007-01-0259 2007
  7. Noyori T. Ohira T. Nakamura T. Akamatsu Y. “Development of a 660cc Turbo-Charged Spark-Ignition Direct-Injection Engine” SAE Paper 2003-32-0013 2003
  8. Fraser N. Blaxill H. “Engine Downsizing and the Application of Gasoline Direct Injection to a High Specific Output Turbocharged Engine” IMechE Fuel Economy and Engine Downsizing Conference 2004
  9. Königstein A. Larsson P.-I. Grebe U. D. Wu K. –J. “Differentiated Analysis of Downsizing Concepts” 29th International Vienna Motor Symposium 2008-12-672-1 2008
  10. Wirth M. Mayerhofer U. Piock W.F. Fraidl G.K. “Turbocharging the DI Gasoline Engine” SAE Paper 2000-01-0251 2000
  11. Lake T. Stokes J. Murphy R. Osborne R. Schamel A. “Turbocharging Concepts for Downsized Dl Gasoline Engines” SAE Paper 2004-01-0036 2004
  12. Kapus P.E. Fraidl G.K. Prevedel K. Fuerhapter A. “GDI Turbo – The Next Steps” JSAE Paper No. 20075355 2007
  13. Kleeberg H. Tomazic D. Lang O. Habermann K. “Future Potential and Development Methods for High Output Turbocharged Direct Injected Gasoline Engines” SAE Paper 2006-01-0046 2006
  14. Hancock D. Fraser N. Jeremy M. Sykes R. Blaxill H. “A New 3 Cylinder 1.2l Advanced Downsizing Technology Demonstrator Engine” SAE Paper 2008-01-0611 2008
  15. Lecointe B Monnier G “Downsizing a Gasoline Engine Using Turbocharging with Direct Injection” SAE Paper 2003-01-0542 2003
  16. Petitjean D. Bernardini L. Middlemass C. Shahed S.M. “Advanced Gasoline Engine Turbocharging Technology for Fuel Economy Improvements” SAE Paper 2004-01-0988 2004
  17. Bozza F. Gimelli A. Strazzullo L. Torella E. Cascone C. “Steady-State and Transient Operation Simulation of a “Downsized” Turbocharged SI Engine” SAE Paper 2007-01-0381 2007
  18. Pallotti P. Torella E. New J. Criddle M. Brown J. “Application of an Electric Boosting System to a Small, Four-Cylinder S.I. Engine” SAE Paper 2003-32-0039 2003
  19. Shahed S.M. “An Analysis of Assisted Turbocharging with Light Hybrid Powertrain” SAE Paper 2006-01-0019 2006
  20. Lefebvre A. Guilain S. “Transient Response of a Turbocharged SI Engine with an Electrical Boost Pressure Supply” SAE Paper 2003-01-1844 2003
  21. Gamma Technologies Incorporated “GT-Drive User's Manual” August 2004
  22. Bishop J. Nedungadi A. Ostrowski G. Surampudi B. Armiroli P. Taspinar E. ‘An engine start/stop System for improved fuel economy’ SAE-Paper No. 2007-01-1777
  23. Bassett M.D. ‘Investigation of technologies to improve drive-cycle fuel economy.’ I.Mech.E. Conference ‘The Real Hybrid Vehicles’ Dunton, England Sept. 20, 2005
  24. Kataoka Kenji Tsuji Kimitoshi ‘Crankshaft positioning utilizing compression force and fast starting with combustion assist for indirect injection engine’ SAE-Paper No. 2005-01-1161

Cited By