Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Investigating the Effects of Multiple Pilot Injections on Stability at Cold Idle for a Dl Diesel Engine

Journal Article
2009-01-0612
ISSN: 1946-3936, e-ISSN: 1946-3944
DOI: https://doi.org/10.4271/2009-01-0612
Published April 20, 2009 by SAE International in United States
Investigating the Effects of Multiple Pilot Injections on Stability at Cold Idle for a Dl Diesel Engine
Sector:
Citation: MacMillan, D., La Rocca, A., Shayler, P., Morris, T. et al., "Investigating the Effects of Multiple Pilot Injections on Stability at Cold Idle for a Dl Diesel Engine," SAE Int. J. Engines 2(1):370-380, 2009, https://doi.org/10.4271/2009-01-0612.
Language: English

References

  1. MacMillan D. La Rocca A. Shayler P. Murphy M. Pegg I. “The Effect of Reducing Compression Ratio on the Work Output and Heat Release Characteristics of a DI Diesel under Cold Start Conditions” SAE World Congress 2008-01-1046 2008
  2. Han Z. Henein N. Nitu B. Bryzik W. “Diesel Engine Cold Start Combustion Instability and Control strategy” SAE World Congress 2001-01-1237 2001
  3. Zahdeh A. Henein N. Bryzik W. “Diesel Cold Starting: Actual Cycle Analysis Under Border-Line Conditions” SAE International Congress and Exposition 900441 1990
  4. Cheng K.Y. Shayler P.J. Murphy M. 2004 “The influence of blow-by on indicated work output from a diesel engine under cold start conditions” Proc. Instn. Mech. Engrs. 218 D, Automotive Engineering
  5. Liu H. Henein N.A. Bryzik W. “Simulation of Diesel Engines Cold-Start” SAE World Congress 2003-01-0080 2003
  6. Directive 2001/100/EC of the European Parliament and of the Council 7 December 2001
  7. Lindl B. Schmitz H.G. “Cold Start Equipment for Diesel Direct Injection Engines” SAE International Congress and Exposition 1999-01-1244 1999
  8. Brown N. Gupta V. La Rocca A. Shayler P.J. Murphy M. Pegg I Watts M. 2007 “Effects of injection strategies on the cold start up of D.I Diesel engines” Proc. IMechE 221 D: J. Automobile Engineering
  9. Osuka I. Nishimura M. Tanaka Y Miyaki M. “Benefits of New Fuel Injection System Technology on Cold Startability of Diesel Engines - Improvement of Cold Startability and White Smoke Reduction by Means of Multi Injection with Common Rail Fuel System (ECD-U2)” SAE International Congress and Exposition 940586 1994
  10. Ishida M. Chen Z.L. Luo G.F. Ueki H “The Effect of Pilot Injection on Combustion in a Turbocharged D.I Diesel Engine” SAE International Off-Highway and Powerplant Congress and Exposition 940586 1994
  11. Li D. Zu X. He X. Peng L. “Transient Combustion Process of an IDI Diesel Engine with Dual-Throat Jet at Cold-Starting” SAE International Congress and Exposition 960029 1996
  12. Kanda T. Hakozaki T. Uchimoto T. Hatano Y. Kitayama N. Sono H “PCCI Operation with Early Injection of Conventional Diesel Fuel” SAE World Congress 2005-01-0378 2005
  13. Daniels C. F. Scilzo B. M. The effects of electrode design on mixture ignitability SAE International Congress and Exposition 960606 1996
  14. Ma F. Wang Y. Liu H. Li Y. Wang J. Ding S. 2007 “Effects of hydrogen addition on cycle-by-cycle variations in a lean burn natural gas spark-ignition engine” International Journal of Hydrogen Energy 33 2
  15. Shayler P.J. Leong D.K.W. Murphy M. “Contributions to Engine Friction During Cold, Low-Speed Running and the Dependence on Oil Viscosity” SAE World Congress 2005-01-1654 2005
  16. Heywood J.B. “Internal Combustion Engine Fundamentals” McGraw-Hill Book Company 1988 510
  17. Cheng K. “Processes Influencing the Indicated Work Output of Direct Injection Diesel Engines During Cold Starting” Ph.D. Thesis The University of Nottingham 2002

Cited By

Recommended Content

Technical Paper Numerical Simulation of Multicomponent Fuel Spray
Technical Paper Which Fuel Properties for Improved CAI Combustion? Study of Fuel Impacts on the Operating Range of a CAI PFI Engine
Journal Article Effects of End-of-Injection Transients on Combustion Recession in Diesel Sprays