This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Fuel Injection Strategies to Improve Emissions and Efficiency of High Compression Ratio Diesel Engines

Journal Article
ISSN: 1946-3936, e-ISSN: 1946-3944
Published October 06, 2008 by SAE International in United States
Fuel Injection Strategies to Improve Emissions and Efficiency of High Compression Ratio Diesel Engines
Citation: Asad, U., Zheng, M., Han, X., Reader, G. et al., "Fuel Injection Strategies to Improve Emissions and Efficiency of High Compression Ratio Diesel Engines," SAE Int. J. Engines 1(1):1220-1233, 2009,
Language: English


  1. Hiroyasu H. Yoshikawa S. Nishida K. Arai M. Oda H. Suzuki M. “Total In-cylinder Sampling Experiments on Emission Formation Processes in a DI Diesel Engine” SAE Paper 902062
  2. Zheng M. Reader G. T. Hawley J. G. “Diesel Engine Exhaust Gas Recirculation - A Review on Advanced and Novel Concepts” International Journal of Energy Conversion and Management 45 6 883 900 2004
  3. Zhao H. Lowry G. Ladommatos N. “Time-Resolved Measurements and Analysis of In-cylinder Gases and Particulates in Compression-Ignition Engines” SAE Transactions, Paper No. 961168
  4. Dec J.E. “A Conceptual Model of Dl Diesel Combustion Based on Laser-Sheet Imaging” SAE Paper 970873
  5. US Environmental Protection Agency (EPA) Highway Diesel Progress Review-Report 2 Office of Transportation and Air Quality March 2004
  6. Dronniou N. Lejeune M. Balloul I. “Combination of High EGR Rates and Multiple Injection Strategies to Reduce Pollutant Emissions” SAE Paper 2005-01-3726
  7. Ladomatos N. Abdelhalim S. Zhao H. “Control of Oxides of Nitrogen from Diesel Engines using Diluents while minimizing the Impact on Particulate Pollutants” Applied Thermal Engineering 18 963 980 1998
  8. Akihama K. Takatori Y. Inagaki K. Sasaki S. Dean A.M. “Mechanism of the Smokeless Rich Diesel Combustion by Reducing Temperature” SAE Paper 2001-01-0655
  9. Satoh K. Zhang L. Hatanaka H. Takatsuki T. Yokota K. “Relationship between NOx and PM emissions from DI diesel engine with EGR” JSAE Review 18 4 369 375 1997
  10. Jacobs T.J. Bohac S.V. Assanis D.N. Szymkowicz P.G. “Lean and Rich Premixed Compression Ignition Combustion in a Light-Duty Diesel Engine” SAE Paper 2005-01-0166
  11. Idicheria C.A. Pickett L.M. “Soot Formation in Diesel Combustion under High-EGR Conditions” SAE Paper 2005-01-3834
  12. Kweon C. Okada S. Stetter J.C. Christenson C.G. Shafer M.M. Schauer J.J. Foster D.E. “Effect of Injection Timing on Detailed Chemical Composition and Particulate Size Distributions of Diesel Exhaust” SAE Paper 2003-01-1794
  13. Ogawa H. Li T. Miyamoto N. Kido S. Shimizu H. “Dependence of Ultra-High EGR and Low Temperature Diesel Combustion on Fuel Injection conditions and Compression Ratio” SAE Paper 2006-01-3386
  14. Pickett L.M. Siebers D.L. “Non-Sooting, Low Flame Temperature Mixing-Controlled Dl Diesel Combustion” SAE Paper 2004-01-1399
  15. Szybist J.P. Bunting B.G. “Cetane Number and Engine Speed Effects on Diesel HCCI Performance and Emissions” SAE Paper 2005-01-3723
  16. Helmantel A. Denbratt I. “HCCI Operation of a Passenger Car Common-Rail Di Diesel Engine with Early Injection of Conventional Diesel Fuel” SAE Paper 2004-01-0935
  17. Zheng M. Reader G.T. Kumar R. Mulenga C. Asad U. Tan Y. Wang M. “Adaptive Control to Improve Low Temperature Diesel Engine Combustion” 12 th Diesel Engine-Efficiency and Emission Reduction Conference (DEER) 2006
  18. Olsson J.O. Tunestal P. Johansson B. “Boosting for High Load HCCI” SAE Paper 2004-01-0940
  19. Kodama Y. Nishizawa I. Sugihara T. Sato N. Iijima T. Yoshida T. “Full-load HCCI Operation with Variable Valve Actuation System in a Heavy-Duty Diesel Engine” SAE Paper 2007-01-0215
  20. Hardy W.L. Reitz R.D. “An Experimental Investigation of Partially Premixed Combustion Strategies Using Multiple Injections in a Heavy-Duty Diesel Engine” SAE Paper 2006-01-0917
  21. Ogawa H. Miyamoto N. Shimizu H. Kido S. “Characteristics of Diesel Combustion in Low Oxygen Mixtures with Ultra-High EGR” SAE Paper 2006-01-1147
  22. Asad U. Zheng M. “EGR Oxidation and Catalytic Fuel Reforming for diesel Engines” ASME Paper ICES2008-1684
  23. Zheng M. Asad U. “Preliminary Energy Efficiency Analyses of Diesel EGR Fuel Reforming with Flow Reversal and Central Fuelling” SAE Transactions, V-116-4, Paper No. 2007-01-4035
  24. Han X. Asad U. Kumar R. Mulenga M.C. Banerjee S. Wang M. Reader G.T. Zheng M. “Empirical Studies of the Diesel Low Temperature Combustion on a Modern Diesel Engine” Combustion Institute/Canadian Section, 2007 Spring Technical Meeting 2007
  25. Kook S. Bae C. Miles P.C. Choi D. Pickett L.M. “The Influence of Charge Dilution and Injection Timing on Low-Temperature Diesel Combustion and Emissions” SAE Paper 2005-01-3837
  26. Mendez S. Thirouard B. “Using Multiple Injection Strategies in Diesel Combustion: Potential to Improve emissions, Noise and Fuel Economy Trade-off in Low CR Engines” SAE Paper 2008-01-1329
  27. Agrell F. Angstrom H-E. Eriksson B. Wikander J. Linderyd J. “Integrated Simulation and Engine Test of closed Loop HCCI Control by Aids of Variable Valve Timings” SAE Paper 2003-01-0748
  28. Neely G.D. Sasaki S. Huang Y. Leet J.A. Stewart D.W. “New Diesel Emission Control Strategy to Meet US Tier 2 Emissions regulations” SAE Paper 2005-01-1091
  29. Asad U. Zheng M. “Fast Heat Release Characterization of a Diesel Engine” International Journal of Thermal Sciences 2008
  30. Stone R. “Introduction to Internal Combustion Engines” 3rd Macmillan 1999
  31. Heywood J. “Internal Combustion Engine Fundamentals” 1st McGraw-Hill 1988
  32. Vanegas A. Won H. Felsch C. Gauding M. Peters N. “Experimental Investigation of the Effect of Multiple Injections on Pollutant Formation in a Common-Rail DI Diesel Engine SAE Paper 2008-01-1191
  33. Yun H. Sellnau M. Milovanovic N. Zuelch S. “Development of Premixed Low-Temperature Diesel Combustion in a HSDI Diesel Engine” SAE Paper 2008-01-0639
  34. Zheng M. Reader G.T. Asad U. Tan Y. Wang M. “Adaptive Control to Improve Low Temperature Diesel Engine Combustion” Proceedings of the 7 th COMODIA International Conference on Modeling and Diagnostics for Advanced Engine Systems Japan 2008

Cited By