Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Effects of Piston Bowl Geometry on Mixture Development and Late-Injection Low-Temperature Combustion in a Heavy-Duty Diesel Engine

Journal Article
2008-01-1330
ISSN: 1946-3936, e-ISSN: 1946-3944
DOI: https://doi.org/10.4271/2008-01-1330
Published April 14, 2008 by SAE International in United States
Effects of Piston Bowl Geometry on Mixture Development and Late-Injection Low-Temperature Combustion in a Heavy-Duty Diesel Engine
Sector:
Citation: Genzale, C., Reitz, R., and Musculus, M., "Effects of Piston Bowl Geometry on Mixture Development and Late-Injection Low-Temperature Combustion in a Heavy-Duty Diesel Engine," SAE Int. J. Engines 1(1):913-937, 2009, https://doi.org/10.4271/2008-01-1330.
Language: English

References

  1. Kimura, S. Aoki, O. Kitahara, Y. Aiyoshizawa, E. “Ultra-Clean Combustion Technology Combining a Low-Temperature and Premixed Combustion Concept for Meeting Future Emission Standards,” SAE paper 2001-01-0200 SAE Trans. 110 4 239 248 2001
  2. Kimura, S. Aoki, O. Ogawa, H. Muranaka, S. Enomoto, Y. “New Combustion Concept for Ultra-Clean and High-Efficiency Small DI Diesel Engines,” SAE Paper 1999-01-3681 SAE Trans. 108 3 2218 2137 1999
  3. Akihama, K. Takatori, Y. Inagaki, K. Sasaki S. Dean, A.M. “Mechanism of the Smokeless Rich Diesel Combustion by Reducing Temperature,” SAE paper 2001-01-0655 SAE Trans. 110 3 648 662 2001
  4. Walter, B. Gatellier, B. “Development of the High Power NADI Concept Using Dual Mode Diesel Combustion to Achieve Zero NOx and Particulate Emissions,” SAE paper 2002-01-1744 SAE Trans. 111 4 779 787 2002
  5. Minato, A. Tanaka, T. Nishimura, T. “Investigation of Premixed Lean Diesel Combustion with Ultra High Pressure Injection,” SAE paper 2005-01-0914 SAE Trans. 114 3 756 764 2005
  6. Kanda, T. Hakozaki, T. Uchimoto, T. Hatano, J. Kitayama, N. Sono, H. “PCCI Operation with Early Injection of Conventional Diesel Fuel,” SAE paper 2005-01-0378 SAE Trans. 114 3 584 593 2005
  7. Miles, P. C. Choi, D. Pickett, L. M. Singh, I. P. Henein, N. RempelEwert, B. A. Yun, H. Reitz, R. D. “Rate-limiting Processes in Late-Injection, Low-Temperature Diesel Combustion Regimes,” Conference on Thermo- and Fluid Dynamic Processes in Diesel Engines (THIESEL) 2004
  8. Musculus, M. P. B. Lachaux, T. Pickett, L. M. Idicheria, C. A. “End-of-Injection Over-Mixing and Unburned Hydrocarbon Emissions in Low-Temperature-Combustion Diesel Engines,” SAE paper 2007-01-0907 2007
  9. Dec, J. E. “A Conceptual Model of D.I. Diesel Combustion Based on Laser-Sheet Imaging,” SAE paper 970873 SAE Trans. 106 3 1319 1348 1997
  10. Musculus, M. P. B. “Multiple Simultaneous Optical Diagnostic Imaging of Early-Injection Low-Temperature Combustion in a Heavy-Duty Diesel Engine,” SAE paper 2006-01-0079 SAE Trans. 115 3 83 110 2006
  11. Singh, S. Reitz, R. D. Musculus, M. P. B. “2-Color Thermometry Experiments and High Speed Imaging of Multi-Mode Diesel Engine Combustion,” SAE paper 2005-01-3842 SAE Trans. 114 4 1605 1621 2005
  12. Idicheria, C. A. Pickett, L. M. “Soot Formation in Diesel Combustion under High-ERG Conditions,” SAE paper 2005-01-3834 SAE Trans. 114 4 1559 1574 2005
  13. Siebers, D. “Scaling Liquid-Phase Fuel Penetration in Diesel Sprays Based on Mixing-Limited Vaporization,” SAE paper 1999-01-0528 SAE Trans. 108 3 703 728 1999
  14. Kook, S. Bae C. Miles, P. C. Choi, D. Bergin, M. Reitz, R. D. “The Effect of Swirl Ratio and Fuel Injection Parameters on CO Emissions and Fuel Conversion Efficiency for High Dilution, Low-Temperature Combustion in an Automotive Diesel Engine,” SAE paper 2006-01-0197 SAE Trans. 115 3 111 132 2006
  15. Espey, C. Dec, J. E. “Diesel Engine Combustion Studies in a Newly Designed Optical Access Engine Using High-Speed Visualization and 2-D Laser Imaging,” SAE paper 930971 SAE Trans. 99 4 703 723 1993
  16. Musculus, M. P. B. “On the Correlation between NOx Emissions and the Diesel Premixed Burn,” SAE paper 2004-01-1401 SAE Trans. 113 4 1319 1348 2004
  17. Schulz, C. Sick, V. “Tracer-LIF Diagnostics: Quantitative Measurement of Fuel Concentration, Temperature, and Fuel/Air Ration in Practical Combustion Systems,” Prog. Energy Combust. Sci. 31 75 121 2005
  18. Musculus, M. P. B. “Effects of the In-Cylinder Environment on Diffusion Flame Lift-Off in a DI Diesel Engine,” SAE paper 2003-01-0074 SAE Trans. 112 3 314 337 2003
  19. Heywood, J. B. Internal Combustion Engine Fundamentals McGraw-Hill, Inc. 1988
  20. Dec, J. E. Espey, C. “Chemiluminescence Imaging of Autoignition in a D.I. Diesel Engine,” SAE paper 982685 SAE Trans. 107 3 2230 2254 1998
  21. Dec, J. E. Coy, E. B. “OH Radical Imaging in a DI Diesel Engine and the Structure of Early Diffusion Flame,” SAE paper 960831 SAE Trans. 105 3 1127 1148 1996
  22. Singh, S.A. Reitz, R. D. Musculus, M. P. B. Lachaux, T. “Simultaneous Optical Diagnostic Imaging of Low-Temperature, Double-Injection Combustion in a Heavy-Duty DI Diesel Engine,” Combustion Science and Technology 179 11 2381 2414 2007
  23. Lachaux, T. Musculus, M. P. B. Singh, S. Reitz, R. D. “Optical Diagnostics of Late Injection Low-Temperature Combustion in a Heavy Duty Diesel Engine,” ASME Internal Combustion Engine Division 2007 Fall Technical Conference Charleston, SC October 16 2007
  24. Klein-Douwel, R. J. H. Luque, J. Jeffries, J. B. Smith, G. P. Crosley, D. R. “Laser-Induced Fluorescence of Formaldehyde Hot Bands in Flames,” Appl. Opt. 39 21 3712 3715 2000
  25. Brackmann, C. Nygren, J. Bai, X. Li, Z. S. Bladh, H. Axelsson, B. Denbratt, I. Koopmans, L. Bengtsson, P. E. Alden, M. “Laser-Induced Fluorescence of Formaldehyde in Combustion Using Third Harmonic Nd:YAG Laser Excitation,” Spectrochimica Acta - A 59 14 3347 3356 2003
  26. Lachaux, T. Musculus, M. P. B. “In-cylinder Unburned Hydrocarbon Visualization During Low-Temperature Compression-Ignition Engine Combustion Using Formaldehyde PLIF,” Proceedings of the Combustion Institute 31 2921 2929 2007
  27. Collin, R. Nygren, J. Richter, M. Alden, M. Hildingsson, L. Johansson, B. “Simultaneous OH- and Formaldehyde-LIF Measurements in an HCCI Engine,” SAE paper 2003-01-3218 SAE Trans. 112 4 2479 2486 2003
  28. Sarner, G. Richter, M. Alden, M. Hildingsson, L. Hultqvist, A. Johansson, B. “Simultaneous PLIF Measurements for Visualization of Formaldehyde- and Fuel- Distributions in a DI HCCI Engine,” SAE paper 2005-01-3869 2005
  29. Pickett, L. M. Siebers, D. L. Idicheria, C. A. “Relationship between Ignition Processes and the Lift-Off Length of Diesel Fuel Jets,” SAE paper 2005-01-3843 SAE Trans. 114 3 1714 31 2005
  30. Peng, H. Zhao, H. Ladommatos, N. “Visualization of the Homogeneous Charge Compression Ignition/Controlled Autoignition Combustion Process Using Two-Dimensional Planar Laser-Induced Fluorescence Imaging of Formaldehyde,” Proceedings of the Institution of Mechanical Engineers Part D: Journal of Automobile Engineering 217 1125 1134 2003
  31. Kashdan, J. T. Papagni, J.-F. “LIF Imaging of Auto-Ignition and Combustion in a Direct Injection Diesel-fuelled HCCI Engine,” SAE paper 2005-01-3739 2005
  32. Curran, H. J. Pitz W. J. Westbrook C. K. Callahan C. V. Dryer F. L. “Oxidation of Automotive Primary Reference Fuels at Elevated Pressures,” Proceedings of the Combustion Institute 27 379 387 1998
  33. Kee, R. J. Rupley, F. M. Meeks, E. E. Miller, J. A. “Chemkin-III: A Fortran Chemical Kinetics Package for the Analysis of Gas Phase Chemical and Plasma Kinetics,” 1996
  34. Glassman, I. Combustion Third Academic Press 1996
  35. McEnally, C. S. Pfefferle, L. D. “Experimental Study of Nonfuel Hydrocarbons and Soot in Coflowing Partially Premixed Ethylene/Air Flames,” Combustion and Flame 121 575 592 2000

Cited By

Recommended Content

Technical Paper Two-Photon Laser-Induced Fluorescence of Nitric Oxide in a Diesel Engine
Journal Article Multi-Dimensional-Modeling-Based Development of a Novel 2-Zone Combustion Chamber Applied to Reactivity Controlled Compression Ignition Combustion
Technical Paper The Effect of Insulated Combustion Chamber Surfaces on Direct-Injected Diesel Engine Performance, Emissions and Combustion