This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Miller-PCCI Combustion in an HSDI Diesel Engine with VVT
- Yutaka Murata - Waseda University ,
- Jin Kusaka - Waseda University ,
- Yasuhiro Daisho - Waseda University ,
- Daisuke Kawano - National Traffic Safety and Environment Laboratory (NTSEL) ,
- Hisakazu Suzuki - National Traffic Safety and Environment Laboratory (NTSEL) ,
- Hajime Ishii - National Traffic Safety and Environment Laboratory (NTSEL) ,
- Yuichi Goto - National Traffic Safety and Environment Laboratory (NTSEL)
Journal Article
2008-01-0644
ISSN: 1946-3936, e-ISSN: 1946-3944
Sector:
Topic:
Citation:
Murata, Y., Kusaka, J., Daisho, Y., Kawano, D. et al., "Miller-PCCI Combustion in an HSDI Diesel Engine with VVT," SAE Int. J. Engines 1(1):444-456, 2009, https://doi.org/10.4271/2008-01-0644.
Language:
English
References
- Ogawa H. Li T. Miyamoto N. Kido S. Shimizu H. “Dependence of Ultra-High EGR and Low Temperature Diesel Combustion on Fuel Injection Conditions and Compression Ratio” SAE Paper 2006-01-3386 2006
- Kanda T. Hakozaki T. Uchimoto T. Hatano J. Sono H. “PCCI Operation with Fuel Injection Timing Set Close to TDC” SAE Paper 2006-01-0920 2006
- Nevin R.M. Sun Y. Gonzalez M.A. Reitz R.D. “PCCI Investigation Using Variable Intake Valve Closing in a Heavy Duty Diesel Engine” SAE Paper 2007-01-0903 2007
- Kodama Y. Nishizawa I. Sugihara T. Sato N. Iijima T. Yoshida T. “Full-Load HCCI Operation with Variable Valve Actuation System in a Heavy-Duty Diesel Engine” SAE Paper 2007-01-0215 2007
- Kawano D. Suzuki H. Ishii H. Goto Y. Odaka M. Murata Y. Kusaka J. Daisho Y. “Ignition and Combustion Control of Diesel HCCI” SAE Paper 2005-01-2132 2005
- Murata Y. Kusaka J. Odaka M. Daisho Y. Kawano D. Suzuki H. Ishii H. Goto Y. “Achievement of Medium Engine Speed and Load Premixed Diesel Combustion with Variable Valve Timing” SAE Paper 2006-01-0203 2006
- Kamimoto T. Bae M. “High Combustion Temperature for the Reduction of Particulate in Diesel Engines” SAE paper 880423 1988
- Akihama, K. Takatori, Y. Inagaki, K. Sasaki, S. Dean, A. M. “Mechanism of the Smokeless Rich Diesel Combustion by Reducing Temperature” SAE Paper 2001-01-0655 2001
- Kitamura T. Ito T. Kitamura Y. Ueda M. Senda J. Fujimoto H. “Soot Kinetic Modeling and Empirical Validation on Smokeless Diesel Combustion with Oxygenated Fuels” SAE Paper 2003-01-1789 2003
- Golovitchev V.I. Montorsi L. Denbratt I. Corcione F. Coppola S. “Numerical Evaluation of Direct Injection of Urea as NOx Reduction Method for Heavy Duty Diesel Engines” SAE Paper 2007-01-0909 2007
- Kusaka J. Montorsi L. Golovitchev V.I. Denbratt I. “Numerical Simulation of Combustion in a Heavy Duty Diesel Engine” FISITA Paper F2006P398 2006
- Kataoka M. Sagane Y. Fujimoto H. Terazawa Y. “EM Reduction by a Large Amount of EGR and Excessive Cooled Intake Gas in Diesel Engines” FISITA Paper F2006P372 2006
- Amsden A.A. “KIVA-3V: A Block-structured KIVA Program for Engines with Vertical or Canted Valves” 1997
- Reitz R.D. “Mechanism of Atomization Processes in High-Pressure Vaporizing Sprays” Atomization and Spray Technology 3 309 337 1987
- Kong S.C. Han Z. Reitz R.D. “The Development and Application of a Diesel Ignition and Combustion Model for Multidimensional Engine Simulations” SAE Paper 950278 1995
- Ricart L. Reitz R.D. “In-cylinder Measurement and Modeling of Liquid Fuel Spray Penetration in a Heavy-Duty Diesel Engine” SAE paper 971591 1997
- Golovitchev V.I. Atarashiya K. Tanaka K. Yamada S. “Towards Universal EDC-Based Combustion Model for Compression Ignited Engine Simulations” SAE paper 2003-01-1489 2003
- Golovitchev V.I. http://www.tfd.chalmers.se/∼valeri/MECH
- Han Z. Reitz R.D. “Turbulence Modeling of Internal Combustion Engines Using RNG k-ε Models” Combustion Science and Technology 106 267 295 1995
- Liu A.B. Mather D. Reitz R.D. “Modeling the Effects of Drop Drag and Break upon Fuel Sprays” SAE paper 930072 1993
- Su T.F. Patterson M.A. Reitz R.D. Farrell P.V. “Experimental and Numerical Studies of High Pressure Multiple Injection Sprays” SAE paper 960861 1996
- Nordin N.
- Curtis E.W. Uludogan A. Reitz R.D. “A New High Pressure Droplet Vaporization Model for Diesel Engine Modeling” SAE paper 952431 1995
- Stanton D.W. Lippert A.M. Reitz R.D. Rutland C.J. “Influence of Spray-wall Interaction and Fuel Films on Cold Starting in Direct Injection Diesel Engines” SAE paper 982584 1998
- Han Z. Uludogan A. Hampson G.J. Reitz R.D. “Mechanism of Soot and NOx Emission Reduction Using Multiple-injection in a Diesel Engine” SAE paper 960633 1996
- Babajimopoulos A. Assanis D.N. Flowers D.L. Aceves S.M. Hessel R.P. “A Fully Integrated CFD and Multi-zone Model with Detailed Chemical Kinetics for the Simulation of PCCI Engines” 15 th International Multidimensional Engine Modeling User's Group Meeting 2005
- Nagle J. Strickland-Constable R.F. “Oxidation of Carbon Between 1000-2000 degrees C” Proceeding 5 th Carbon Conference 1 154 164 1962
- Patterson M.A. Kong S.C. Hampson G.J. Reitz R.D. “Modeling the Effects of Fuel Injection Characteristics on Diesel Engine Soot and NOx Emissions” SAE paper 940523 1994