This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
A DG/K-Based CAD/CAM System for Optimal Sculptured Surface Machining on Multi-Axis NC Machine
Technical Paper
2006-01-0381
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
A novel DG/K-based method for sculptured surface generation on NC machine is briefly disclosed in the paper. The DG/K-based method is developed for the purposes of optimal sculptured surface machining (SSM) on multi-axis NC machine. SSM is widely used in automotive industry. It can be used as a mathematical foundation of an appropriate CAD/CAM system or being incorporated in an existing CAD/CAM system for sculptured surface machining. Aiming reduction of machining cost to the lowest possible range, all parameters of the machining operation are required being optimal at every instant of machining. The reported in the paper DG/K-based method yields computation of the optimal values of all the parameters of machining operation of a sculptured surface on multi-axis NC machine.
Authors
Topic
Citation
Radzevich, S., "A DG/K-Based CAD/CAM System for Optimal Sculptured Surface Machining on Multi-Axis NC Machine," SAE Technical Paper 2006-01-0381, 2006, https://doi.org/10.4271/2006-01-0381.Also In
References
- doCarmo, M.P. Differential Geometry of Curves and Surfaces Englewood Cliffs, NJ Prentice-Hall 1976 503
- Radzevich, S.P. Fundamentals of Surface Machining Monograph Kiev, Rastan 2001 592
- USSR A Method of Optimal Orientation of a Sculptured Surface on the Worktable of Multi-Axis NC Machine Radzevich; S.P. Int. Cl 4 B23Q 15/007, Filed February 17 1987
- Radzevich, S.P. “A Method of Optimal Orientation of a Sculptured Surface on the Worktable of Multi-Axis NC Machine” Izvestiya VUZov. Mashinostroyeniye 1990 No. 2 140 145
- Radzevich, S.P. Sculptured Surface Machining on Multi-Axis NC Machine Monograph Kiev, Vishcha Shkola 1991 192
- Radzevich, S.P. Goodman, E.D. “Computation of Optimal Workpiece Orientation for Multi-Axis NC Machining of Sculptured Part Surfaces” ASME J. of Mechanical Design June 2002 124 No 2 201 202
- Radzevich, S.P. A Method of Profiling of a Form Cutting Tool USSR March 31 1987
- Radzevich, S.P. “Profiling of a Form Cutting Tool for Sculptured Surface Machining on Multi-Axis NC Machine” Stanki i Instrument 1989 No. 7 10 12
- Radzevich, S.P. “ℝ-Mapping Based Method for Designing of Form Cutting Tool for Sculptured Surface Machining” Mathematical and Computer Modeling 36 Issue 7–8 2002 921 938
- USSR A Method of Simulation of Sculptured Surface Machining on Multi-Axis NC Machine Radzevich; S.P. Int. Cl 4 B23C 3/16, Filed February 17 1987
- Radzevich, S.P. “Conditions of Proper Sculptured Surface Machining” Computer-Aided Design 34 No 10 September 2002 727 740
- Radzevich, S.P. “Mathematical Modeling of Contact of Two Surfaces in the First Order of Tangency” Mathematical and Computer Modeling 39 Issue 9–10 May 2004 1083 1112
- Radzevich, S.P. “A Closed-Form Solution to the Problem of Optimal Tool-Path Generation for Sculptured Surface Machining on Multi-Axis NC Machine” Mathematical and Computer Modeling