This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
New Power Valve Additive Technology Suitable for Two-Stroke Engines Containing Power Valves or Exhaust Port Modifiers
Technical Paper
2005-32-0096
Annotation ability available
Sector:
Language:
English
Abstract
Exhaust port timing control devices or power valves were introduced into a two-stroke engine in response to the customer's desire for more power. This was the most cost-effective way for manufacturers to increase power over the entire rpm range without significantly modifying their original engine designs, thus ensuring that the excellent power-to-weight ratio characteristics intrinsic to the two-stroke engine were maintained.
Varieties of different systems exist to control and operate these exhaust port modifiers. Some of the more sophisticated electronic systems incorporate auto-cleaning cycles at start-up, which help eliminate power valve sticking due to carbon build-up. The more economically designed systems, however, do not. As a result, the valves are more susceptible to deposits, which can reduce their functionality and significantly impact engine performance. Very heavy deposit formation can ultimately stick the valves and make them inoperable.
New power valve additive technology has been developed to inhibit deposit formation on these exhaust port modifiers and to ensure consistent engine performance over many hours of operation. This development work was facilitated by utilizing two in-house engine tests. The first test stand, containing a Yamaha® YZ125H1™ motocross racing engine, was used as a gross screening tool to rank a large variety of different additive chemistries with respect to their power valve cleanliness performance. The best performing candidates were then further evaluated in a second engine test stand, containing a Polaris® 800 XC SP EDGE™ twin-cylinder snowmobile engine. This test procedure was specifically designed to serve as a finer discriminating tool for evaluating good performing lubricants and to further rank these oils based on their ability to minimize deposit formation. Various commercial lubricants were benchmarked using this engine test procedure, and the goal was to develop new additive technology that exceeded their current performance. Final proof of performance data was obtained by evaluating this new power valve additive technology in the field.
In summary, for variable exhaust port modifiers to operate well, carbon build-up and gumming must be inhibited. The new power valve additive technology developed is significant and important because it successfully minimizes deposit formation and ensures improved and consistent engine performance.
Recommended Content
Ground Vehicle Standard | Snowmobile Throttle Control Systems |
Technical Paper | IRL Aurora V8 Design and Development |
Magazine Issue | Automotive Engineering International 2013-06-04 |
Authors
Citation
Svarcas, L. and Brenner, M., "New Power Valve Additive Technology Suitable for Two-Stroke Engines Containing Power Valves or Exhaust Port Modifiers," SAE Technical Paper 2005-32-0096, 2005.Also In
References
- Blair, Gordon P. “Design and Simulation of Two-Stroke Engines,” Society of Automotive Engineers, Inc. 1996
- Caunter, C. F. “Motorcycles, A Technical History,” Science Museum London HMSO 1970
- Holzleitner, Johann “Internal Combustion Engine Comprising Means for Controlling the Axial Extent of a Port in a Cylinder,” Bombardier-Rotax GMBH
- Bostelmann, Willy “Internal Combustion Engine Comprising Means for Controlling the Axial Extent of an Exhaust Port in a Cylinder,” Bombardier-Rotax GMBH
- Arahata, Yoshitaka Toriyama, Masayuki “Exhaust Timing Control System for a Two-Cycle Engine,” Honda Giken Kogyo Kabushiki Kaisha
- Lawrence, Thomas G. “Control Device for Exhaust Timing of a Two-Cycle Engine Using Intake System Pressure,” Chrysler Corporation
- Spaulding, Gregory L. “Internal Combustion Engine with Pneumatically Controlled Variable Exhaust Valve,” Artic Cat, Inc.
- Gorr, Eric “Motocross and Off-Road Performance Handbook.” www.eric-gorr.com
- Snow Tech Magazine “Snow Technology 2002: Technology and Trends of the New 2002 Models.” www.snowtechmagazine.com
- Amsoil Inc. “Synthetic 2-Cycle Oil for Exhaust Gas Valve.” www.lubes-n-filters.com