This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Effect of Drill Geometry in Drilling Of Glass Fiber Reinforced Plastic (GFRP) Using Carbide Drill
Technical Paper
2005-01-3328
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The damage generated during the drilling of Glass Fiber Reinforced Plastics (GFRP) is detrimental for the mechanical behavior of the composite structure. Effect of drill geometry on drilling of glass/epoxy (GFRP) laminates using three types of drill, namely standard twist drill, Zhirov point and multifacet (MFD) has been studied. A woven glass fiber reinforced plastic laminate of 9 mm thickness was prepared and drilling was carried out using a CNC vertical machining centre. The thrust force and hole quality machined during drilling were compared for each drill geometry. Zhirov drill gives the benefit of less cutting force, and best surface finish. From the experiments it is found that the multifacet drill produces delamination free hole and better surface finish among other two geometries.
Authors
Citation
Krishnaraj, V., Suresh, G., and Vijayarangan, S., "Effect of Drill Geometry in Drilling Of Glass Fiber Reinforced Plastic (GFRP) Using Carbide Drill," SAE Technical Paper 2005-01-3328, 2005, https://doi.org/10.4271/2005-01-3328.Also In
References
- Abrate S 1997 Machining of composites Composites engineering hand book Mallick PK Marcel Deckker Inc NY
- persson Erik Eriksson Ingvar Zackrisson Leif 1997 Effects of hole machining defects on strength and fatigue life of composite laminates Composites part a 28 a 141 151
- Konig W Wulf CH Graß P Willercheid H 1985 Machining of fibre reinforced plastics Annals of the CIRP 38 119 124
- Hocheng H Dharan CKH 1990 Delamination during drilling of composite laminates J. of engineering for industry 112 236 239
- Won MS Dharan CKH 2002 Chisel edge and pilot hole effects in drilling composite laminates J of manufacturing science and engineering 124 242 247
- Tsao CC Hocheng H 2004 Taguchi analysis of delamination associated with various drill bits in drilling of composite material Int. J. of machine tools and manufacture 44 1085 1090
- davim J Paulo reis Pedro Conceicao Antonio C 2004 Experimental study of drilling glass fiber reinforced plastics (GFRP) manufactured by hand lay-up Composites science and technology 64 289 297
- Davim JP reis Pedro 2003 Study of delamination in drilling carbon fiber reinforced plastics(CFRP) using design experiments Composite structures 59 481 487
- Ram Kumar J Malhotra SK Krishnamurthy R 2004 Effect of workpiece vibration on drilling of GFRP laminates J.of materials processing technology 152 329 332
- Hocheng H Tsao CC 2003 Comprehensive analysis of delamination in drilling of composite material with various drill bits J. of materials processing technology 140 335 339
- Bhatnagar N Naik NK Ramakrishnan N 1993 Experimental investigation of drilling of CFRP composites Materials and manufacturing processes 8 683 701
- Kohkonen Kent e. Nitin potdar 1998 Composite machining Hand book of composites Peters st Chapman & hall
- Komanduri R 1993 Machining of fibre-reinforced composites ASME mechanical engineering 58 66
- Piquet R Ferret B Lachaud F Swider P 2000 Experimental analysis of drilling damage in thin carbon/epoxy plate using special drills Composites part a: Appl. Sci. Manufact 31 10 1107 1115
- Khashaba UA 2004 Delamination in drilling gfr-thermoset composite structures Composite structures 63 3 313 327
- Bhattacharyya Amitabha 2000 Metal cutting theory and practice New central book agency (P) ltd Calcutta
- Wu S M 1985 Multifacet drills Hand book of high-speed machining technology King Robert I Chapman and Hall NY