This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Uncertainty Quantification for Airframes: Current Status, Needs, and Suggested Directions
Technical Paper
2003-01-0874
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Widespread interest in uncertainty quantification methods for airframe design and certification is driven by the desire to realize acquisition and operational cost savings through increased reliance on analysis, the goal being to design and produce more robust airframes. General sources of uncertainty are described that complicate airframe design and testing, thereby contributing to the high cost of airframes. Recent applications of uncertainty quantification are reviewed with the objective of highlighting promising research and transition applications. Finally, several challenges and needs are explored to suggest future steps that must be completed to enable practical application of uncertainty quantification in airframe design and certification.
Recommended Content
Technical Paper | Certification of Digital Avionics - A Review of Recent FAA Experience |
Technical Paper | Aircraft and Subsystem Level HIRF Test Methods |
Technical Paper | Climb Performance Analysis Using a GPS Reference Method |
Citation
Pettit, C., "Uncertainty Quantification for Airframes: Current Status, Needs, and Suggested Directions," SAE Technical Paper 2003-01-0874, 2003, https://doi.org/10.4271/2003-01-0874.Also In
Reliability & Robust Design in Automotive Engineering on CD-ROM
Number: SP-1736CD; Published: 2003-03-03
Number: SP-1736CD; Published: 2003-03-03
References
- Harris, C.E. Starnes, J.H. Shuart, M.J. “Design and Manufacturing of Aerospace Composite Structures, State-of-the-Art Assessment,” Journal of Aircraft 39 4 July-August 2002 545 560
- Veley, D Pettit, C. Holzwarth, R. “Increased Reliance on Analyses for Certification of Aircraft Structures,” 8 th International Conference on Structural Safety and Reliability (ICOSSAR) Newport Beach, CA June 2001
- Mavris, D.N. DeLaurentis, D.A. “A Stochastic Design Approach for Aircraft Affordability,” 21 st Congress of the International Council on the Aeronautical Sciences (ICAS) Melbourne, Australia 1998
- Paul, D. Kelly, L. Venkayya, V. Hess, T. “Evolution of U.S. Military Aircraft Structures Technology,” Journal of Aircraft 39 1 Jan-Feb 2002 18 29
- Oreskes, N. Shrader-Frechette, K. Belitz, K. “Verification, Validation, and Confirmation of Numerical Models in the Earth Sciences,” Science 263 4 Feb 1994 641 646
- American Institute of Aeronautics and Astronautics Guide for the Verification and Validation of Computational Fluid Dynamics Simulations
- Defense Modeling and Simulation Office Office of the Director of Defense Research and Engineering Verification, Validation, and Accreditation (VV&A) Recommended Practices Guide 1996
- Melchers, R.E. Structural Reliability Analysis and Prediction 2 nd ed. Wiley 1999
- Ayyub, B.M. Elicitation of Expert Opinions for Uncertainty and Risks CRC Press 2001
- Liaw, D.G. Yang, H.T.Y “Reliability of Uncertain Laminated Shells Due to Buckling and Supersonic Flutter,” AIAA Journal 29 10 1991 1698 1708
- Liaw, D.G. Yang, H.T.Y “Reliability and Nonlinear Supersonic Flutter of Uncertain Laminated Plates,” AIAA Journal 31 12 1993 2304 2311
- Lindsley, N.J. Beran, P.S. Pettit, C.L. “Effects of Uncertainty on Nonlinear Plate Aeroelastic Response,” 43 rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference Denver, CO April 2002
- Beran, P.S. Pettit, C.L. “Prediction of Nonlinear Panel Response Using Proper Orthogonal Decomposition,” 42 nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference Seattle, WA April 2001
- Lindsley, N.J. Beran, P.S. Pettit, C.L. “Effects of Uncertainty on Nonlinear Plate Response in Supersonic Flow,” 9 th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference Atlanta, GA Sept 2002
- Yang, J.S. Nikolaidis, E. “Design of Aircraft Wings Subjected to Gust Loads: A Safety Index Based Approach,” AIAA Journal 29 5 May 1991 804 812
- Pettit, C.L. Grandhi, R.V. “Optimization of Aerospace Structures for Aeroelastic Response Reliability,” Journal of Aircraft 2002
- Allen, M. Maute, K. “Reliability-Based Design Optimization of Aeroelastic Structures,” 9 th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference Atlanta, GA Sept 2002
- Sues, R.H. Aminpour, M.A. Shin, Y. “Reliability-Based MDO for Aerospace Systems,” 42 nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference Seattle, WA April 2001
- Karpel, M. Moulin, B. Idan, M. “Aeroservoelastic Design Process Using Structural Optimization and Robust Control Methods,” 8 th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference Long Beach, CA Sept 2000
- Mahadevan, S. Shi, P. “Corrosion Fatigue Reliability of Aging Aircraft Structures,” Progress in Structural Engineering and Materials 3 2001 188 197
- Lin, K.Y. Rusk, D.T. Du, J. “Equivalent Level of Safety Approach to Damage-Tolerant Aircraft Structural Design,” Journal of Aircraft 39 1 Jan-Feb 2002 167 174
- Spottswood, S.M. Wolfe, H.F. “Comparing Fatigue Life Estimates Using Experimental and Spectral Density Based Probability Distributions,” Journal of Aircraft 39 3 May-June 2002 493 498
- Wieland, D. Griffin, K. “Impact of Parameter Variation on Damage Tolerance Analysis Estimates: Final Program Review Meeting,”
- Millwater, H. Griffin, K. Wieland, D. West, A. Smith, H. Holly, M. “Assessment of Benefits for Probabilistic Design Methods,”
- Abdi, F. Latham, R. Delmondo, F. Chamis, C. “Durability and Reliability Analysis for Flight Qualified Structural Integrity,” 41 st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference Atlanta, GA April 2000
- Lind, R. “Match-Point Solutions for Robust Flutter Analysis,” Journal of Aircraft 39 1 Jan-Feb 2002 91 99
- Lind, R. Brenner, M. “Flutterometer: An On-Line Tool to Predict Robust Flutter Margins,” Journal of Aircraft 37 6 2000 1105 1112
- Mahadevan, S. Dey, A. Tryon, R. Wang, Y. Rousseau, C. “Reliability Analysis of Rotorcraft Composite Structures,” Journal of Aerospace Engineering 14 4 October 2001 140 146
- Zhang, R. Mahadevan, S. “Integration of Computation and Testing for Reliability Estimation,” Reliability Engineering and System Safety 74 2001 13 21
- Veley, D.
- Thornton, E.A. Thermal Structures for Aerospace Applications AIAA Education Series 1996
- Tuegel, E.
- Mahadevan, S. Liu, X. “Probabilistic Analysis of Composite Structure Ultimate Strength,” AIAA Journal 40 7 July 2002 1408 1414
- Dohner, J.L. “White Paper: On the Development of Methodologies for Constructing Predictive Models of Structures with Joints and Interfaces,” Sandia Report 2001
- Segalman, D.J. “An Initial Overview of Iwan Modeling for Mechanical Joints,” Sandia Report 2001
- Huttsell, L.
- Marczyk, J. Principles of Simulation-Based Computer-Aided Engineering FIM Publications 1999
- Weishaupl, C. Laschka, B. “Euler Solutions for Airfoils in Inhomogeneous Atmospheric Flows,” 30 th AIAA Fluid Dynamics Conference Norfolk, VA June 1999
- Hall, R. Clay, S.
- Holzwarth, D.
- Ibrahim, R.A. “Structural Dynamics with Parametric Uncertainties,” Applied Mechanics Review 40 3 Mar 1987 309 328
- Schueller, G.I. Pradlwarter, H.J. “On the Random Eigenvalue Problem of Large FE-Models,” 4 th International Conference on Stochastic Structural Dynamics Notre Dame, IN August 1998 455 461
- Manohar, C.S. Ibrahim, R.A. “Progress in Structural Dynamics with Stochastic Parameter Variations: 1987-1998” Applied Mechanics Review 52 5 May 1999 177 197
- Ellingwood, B.R.
- Ellingwood, B.R. “Acceptable Risk Bases for Design of Structures,” Progress in Structural Engineering and Materials 3 2001 170 179
- Reid, S.G. “Specification of Design Criteria Based on Probabilistic Measures of Design Performance,” Structural Safety 24 2002 333 345
- Dyess, W. “The Future Requirements for Uncertainty Analysis in Support of the Air Force SEEK EAGLE Office” Air Force Office of Scientific Research /Air Force Research Laboratory, Air Vehicles Directorate/Sandia National Laboratories Workshop on Uncertainty in Design, Analysis, and Certification of Engineering Systems Albuquerque, NM March 2001
- Morgan, M.G. Henrion, M. Uncertainty - A Guide to Dealing with Uncertainty in Quantitative Risk and Policy Analysis Cambridge University Press 1990
- Hazelrigg, G. Systems Engineering: An Approach to Information-Based Design Prentice Hall 1996
- Decision Based Design Open Workshop http://dbd.eng.buffalo.edu
- Thuesen, G.J. Fabrycky, W.J. Engineering Economy 7th Prentice Hall 1989
- Blair, M. Love, M. “Scenario-Based Affordability Assessment Tool,” RTO Symposium on Reduction of Military Vehicle Acquisition Time and Cost through Advanced Modelling and Virtual Product Simulation Paris France April 2002