This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Application of a Modular Vehicle Noise and Vibration Development Approach
Technical Paper
2001-26-0037
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Event:
SIAT 2001
Language:
English
Abstract
The paper addresses the problem of NVH development of vehicles. An approach for the specification and assessment of subsystem performance as well as of the early part of the integration process is presented hereto. The basic technologies applied are those of Transfer Path Analysis and System Synthesis. Various applications to industrial problems are discussed.
Authors
Topic
Citation
Van der Linden, P., Wyckaert, K., and Van der Auweraer, H., "Application of a Modular Vehicle Noise and Vibration Development Approach," SAE Technical Paper 2001-26-0037, 2001, https://doi.org/10.4271/2001-26-0037.Also In
References
- Fahy, F. “The reciprocity principle and applications in vibro acoustics” Second International Congress on Recent Developments in air- and structure borne sound and vibration March 4-6 1992 591 598
- Verheij, J. W. “Inverse and Reciprocity Methods for Machinery Noise source Characterisation and Quantification” Fourth International Congress on Sound and Vibration 1996 St-Petersburg
- Mason, J. M. Fahy, F. “Application of a Reciprocity Technique for the Determination of the Contribution of Various Regions of Vibrating Body to the Sound Pressure at a Receiver Point” Proceedings of the Institute of Acoustics 12 1990 409 476
- van der Linden, P. J. G. De Meester, K. “Airborne Source Strength measurements on the basis of pressure indicator inversion applied to an engine valve cover” Fourth International Congress on Sound and Vibration St-Petersburg 1996
- Wyckaert, K. et al. “Hybrid Substructuring for Vibro-Acoustical Optimisation: Application to Suspension - Car Body Interaction”
- van der Linden, P. J. G. Varet, P. “Experimental Determination of Low Frequency Noise Contributions of Interior Vehicle Body Panels in Normal Operation” SAE paper 960194 1996
- Verheij, Hoebrichts Thompson “Acoustical Source Strength Characterisation for Heavy Road Vehicles Engines in connection with Pass-by Noise” Third International Congress on air- and structure borne Sound and Vibration June 1994 Montreal
- Mason, J.M. Fahy, F. “Application of a reciprocity technique for the determination of the contributions of various regions of vibrating body to the sound pressure at a receiver point” Proceedings of the Instate of Acoustic 12 1990 409 476
- van der Linden, P. J. G. Defay, H. Le Martret, J. P. “Truck Pass-By Noise, Detailed Sources Contribution Identification during ISOR362 Pass-by” International Seminar on Modal Analysis Leuven 1996
- Gielen, L. Deges, R. “The identification, quantification and reduction of structural-borne road noise in a midsize passenger car” SAE International Congress and Exposition February 26-29 1996 Cobo Center - Detroit, Michigan USA
- van der Linden, P. J. G. Fun, J.K. “Using mechanical-Acoustic Reciprocity for diagnosis of structure borne sound in vehicles” SAE 93130
- van der Linden, P. J. G. Schnur, J. Schomburg, T. “Quantifying the Noise Emission of Engine Oilsumps, Valve Covers, etc. Using Artificial Excitation” Fifth International Congress on Sound and Vibration Adelaide December 1997
- Wyckaert, K. Mc Avoy, G. Mas, P. “Flexible Substructuring Based on Mixed Finite Element and Experimental Models: A Step Ahead of Transfer Path Analysis” Proceedings Fourth International Modal Analysis Conference Michigan 1996
- Queckenberg “Hybrid Test-Analytical Modeling for Structure borne Noise Prediction” Proceedings of the 21 st International Seminar on Modal Analysis (ISMA) Leuven 1996
- Wyckaert, K. Toniato, G. Xu, K. Q. “Low- and Mid Frequency FRF based Modelling of Engine Crossmember and Car Body Interaction for Vibratory and Acoustical Response Evaluation” “Fifth International Congress on Sound and Vibration Adelaide December 1997
- Wyckaert, K. Van der Auweraer, H. “Operational Analysis, Transfer Path; “Analysis, Modal Analysis: Tools to Understand Road Noise Problems in Cars” Proceedings SAE Noise and Vibration Conference Traverse City May 1995
- Heylen, W. Lammers, S. Sas, P. “Modal analysis theory and testing” Catholic University of Leuven. Dept PMA 1998
- Dierckx, B. et al. “Using rigid connections in experimental modal synthesis; implementation and validation”
- Wyckaert, K. Augusztinovicz, F. “Experimental Vibro-acoustical Modal Analysis: Reflections on Reciprocity and Excitation Strategy” Proceedings 13 th International Modal Analysis Conference Nashville February 1995
- Wyckaert, K. Xu, K. Q. “Using Frequency Response Function based Hybrid Substructuring Procedures: the virtues of Static and Dynamic Compensation” Proceedings IMAX-XV Japan, Tokyo September 1997
- Hermans, L. Iadevaia, M. “Guidelines on the Use of Experimental SAE for Modeling and Understanding Road Noise in Cars” SAE 99NV-80
- Fahy, F.Y. “Statistical Energy Analysis” ISMA Leuven, Belgium 1993
- Delange, K. “High Frequency Vibrations Contributions to Experimental and Computational SEA Parameter Identification Techniques” Dept. PMA K.U. Leuven 1996