This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
A Study of the Influence of WC-10Co-4Cr HVOF Coating on Mechanical Properties of AISI 4340 Steel
Technical Paper
2001-01-4066
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Aircraft landing gear manufacturers are considering WC thermal spray coatings applied by the high-velocity oxygen-fuel (HVOF) process as an alternative to hard chrome plating. The question to be answered is if the performance of the alternative candidate is at least comparable to results obtained for hard chrome plating. The objective of this research is to compare the influence of the WC-10Co-4Cr coating applied by HVOF process and hard-chromium electroplating on the fatigue strength of AISI 4340 steel with and without shot peening. S-N curves were obtained in axial fatigue tests for the base material, chromium plated and tungsten carbide coated specimens.
Authors
- Renato Chaves Souza - Faculdade de Engenharia Química de Lorena - FAENQUIL/DEMAR
- Marcelino Pereira do Nascimento - Universidade Estadual Paulista - DMT - UNESP/FEG.
- Herman Jacobus Cornelis Voorwald - Universidade Estadual Paulista - DMT - UNESP/FEG.
- Walter Luís Pigatin - EMBRAER-LIEBHERR /Equipamentos do Brasil S.A.
Topic
Citation
Souza, R., Nascimento, M., Voorwald, H., and Pigatin, W., "A Study of the Influence of WC-10Co-4Cr HVOF Coating on Mechanical Properties of AISI 4340 Steel," SAE Technical Paper 2001-01-4066, 2001, https://doi.org/10.4271/2001-01-4066.Also In
References
- Vetters, H. R. Schulz, A. Mayr, P. Saunders, S. R. J. “Characterization and Properties of Hard Coatings; International Standardization Efforts” Surface and Coatings Technology 86–87 1996 345 50
- Broszeit, E. Friedrich, C. Berg, G. “Deposition, Properties and Applications of PVD Cr x N Coatings” Surface and Coatings Technology 115 1999 9 16
- Natishan, P. M. Lawrence, S. H. Foster, R. L. Lewis, J. Sartwell, B. D. “Salt Fog Corrosion Behavior of High-velocity Oxygen-fuel Thermal Spray Coatings Compared to Electrodeposited Hard Chromium” Surface and Coatings Technology 130 2000 218 23
- Hotta, S. Itou, Y. Saruki, K. Arai, T. “Fatigue Strength at a Number of Cycles of Thin Hard Coated Steels with Quench-hardened Substrates” Surface and Coatings Technology 73 1995 5 13
- Wang, S. Li, Y. Yao, M. Wang, R. “Compressive Residual Stress Introduced by Shot Peening” Journal of Materials Processing Technology 73 1998 64 73
- Bolles, D. C. “HVOF Thermal Spraying: an Alternative to Hard Chrome Plating” Welding Journal Oct. 1995 31 4
- Li, X. M. Yang, Y. Y. Shao, T. M. Jin, Y. S. Barbezat, G. “Impact Wear Performances of Cr 3 C 2 -NiCr Coatings by Plasma and HVOF Spraying” WEAR 202 1997 208 14
- Watanabe, S. Tajiri, T. Sakoda, N. Amano, J. “Fatigue Cracks in HVOF Thermally Sprayed WC-Co Coatings”” Journal of Thermal Spray Technology 7 1998 93 6
- Bodger, B. E. Mcgrann, R. T. R. Somerville, D. A. “The Evaluation of Tungsten Carbide Thermal Spray Coatings as Replacements for Electrodeposited Chrome Plating on Aircraft Landing Gear” Plating & Surface Finishing Sept. 1997 28 31
- Nascimento, M. P. Souza, R. C. Miguel, I. M. Pigatin, W. L. Voorwald, H. J. C. “Effects of Tungsten Carbide Thermal Spray Coating by HP/ HVOF and Hard Chromium Electroplating on AISI 4340 High Strength Steel” Surface & Coatings Technology 138 2001 113 124
- Coulson, W. Leheup, E.R. Marsh, M.G. Reciprocating Wear of WC-17Co coatings in aqueous environments Trans. IMF 1995 73 1 7 11