This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Simulation of the Cold Compaction Process of a Structural PM Part
Technical Paper
2001-01-3284
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
In the Metalworking Industry the design and the control of the processes have been traditionally based on the experience and, sometimes, considered as an art. The application of numerical methods reduces the costs of the design and elaboration processes and contributes to the improvement of the product quality. In this work the authors present the simulation of the cold compaction of a two-level powder metallurgical part using a commercial FEM code. The plastic behaviour has been represented by means of the Drucker-Prager/CAP model.
Recommended Content
Technical Paper | Crash Simulation of Structural Foam |
Technical Paper | Improved Simulation of Local Necks in Quick Plastic Forming |
Technical Paper | Dent Simulation of Automotive Outer Panel Using High Strength Steel Sheets |
Authors
- M. D. Riera - Dpt. Ciencia de Materiales e Ingeniería Metalúrgica, Centre Tecnològic de Manresa, Universitat Politècnica de Catalunya
- J. M. Prado - Dpt. Ciencia de Materiales e Ingeniería Metalúrgica, Centre Tecnològic de Manresa, Universitat Politècnica de Catalunya
- A. Bejarano - Dpt. Ciencia de Materiales e Ingeniería Metalúrgica, Centre Tecnològic de Manresa, Universitat Politècnica de Catalunya
Citation
Riera, M., Prado, J., and Bejarano, A., "Simulation of the Cold Compaction Process of a Structural PM Part," SAE Technical Paper 2001-01-3284, 2001, https://doi.org/10.4271/2001-01-3284.Also In
References
- Riera M. D. “Comportamiento elastoplástico de compactos Pulvimetalúrgicos” Universitat Politècnica de Catalunya Barcelona 1999
- Drucker D. C. Prager W. “Soil Mechanics and Plastic Analysis of Limit Design” Quarterly of Applied Mathematics 10 1952 157 175
- Desai C. S. Siriwardane H. J. Constitutive Laws for Engineering Materials with emphasis on Geologic Materials Prentice Hall, Inc. Englewood Cliffs, N. J. USA 1984
- Drucker D. C. Gibson R. E. Henkel D. J. “Soil Mechanics and Work Hardening Theories of Plasticity” Proc. ASCE 81 1955
- DiMaggio F. L. DiMaggio F. L. “Material Model for Granular Soils” Journal of the Engineering Mechanics Division ASCE 97 EM3 Proc. Paper 8212 Jun. 1971 935 950
- Sandler I. DiMaggio F. L. Baladi Y. “Generalized Cap Model for Geological Materials” Journal of Geotechnical Engineering Division 102 GT7 1976 683 699
- Riera M. D. Prado J. M. “Uniaxial Compression Tests on Powder Metallurgical Compacts” Proceedings of the 1998 Powder Metallurgy World Congress & Exhibition EPMA UK 1998
- Coube O. “Modelling and numerical Simulation of Powder Die Compaction with consideration of Cracking” Thesis Université Pierre et Marie Curie Paris VI 1998
- Pavier E. “Caracterisation du comportement d'une poudre de fer pour le procedé de compression en matrice” Thesis Institut National Polytechnique de Grenoble 1998
- Hibbitt, Karlsson and Sorensen, Inc. ABAQUS Theory Manual. Version 5.7 1997
- Prado J. M. Riera M. D. “Modelling of Elastic Behaviour of Metal Powder Compacts” NATO Advanced Research Workshop. Recent Developments in Computer Modelling of Powder Metallurgy Processes Kiev (Ukraine) 2000
- Riera M. D. Prado J. M. Frachon A. Imbault D. Dorémus P. “Modelling of Green Compact Elasticity” Powder Metallurgy World Congress. PM'00 Kyoto (Japan) 2000
- Riera M. D. Prado J. M. Larsson A. “Determination of the green Strength of Powder Metallurgical Compacts by means of the Brazilian Test” Powder Metallurgy World Congress. PM'00 Kyoto (Japan) 2000
- Pavier E. Dorémus P. “Comparison between constitutive equations modelling the compaction of iron powder and experimental data obtained with triaxial tests” Proceedings of the International Workshop on Modelling of Metal Powder Forming Processes Grenoble (France) 1997 1 17
- Fax D. “Pulvertransfer und Scherriβbildung beim Pressen pulvermetallurgischer Formteile” Diplomarbeit Fakultät für Metallurgie und Werkstofftechnik der RWTH Aachen (Germany) 1996