This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Effects of Vehicle A-pillar Shape on Local Mean and Time-Varying Flow Properties
Technical Paper
2001-01-1086
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Event:
SAE 2001 World Congress
Language:
English
Abstract
Separated flow is the main generator of aerodynamic noise in passenger vehicles. The flow around the A-pillar is central to the wind noise as many modern vehicles still have high fluctuating pressures due to flow separations in this region. Current production vehicle geometry is restricted due to the amount of three dimensionality possible in laminated windscreen glass (and door opening etc). New materials (e.g., polycarbonate) offer the possibility of more streamlined shapes which allow less or no flow separation. Therefore, a series of experimental investigations have been conducted to study the effects of the A-pillar and windshield geometry and yaw angles on the local flow and noise using a group of idealised road vehicle models. Surface mean and fluctuating pressures were measured on the side window in the A-pillar regions of all models at different Reynolds numbers and yaw angles. Flow visualisation was also used to see the flow structure and supplement the surface mean and fluctuating pressure data. Frequency based analysis was conducted. The studies show that depending upon the curvatures of A-pillar and windshield, the fluctuating pressure coefficients can be reduced significantly. Reynolds number sensitivities were minimal and the surface mean and fluctuating pressures can be scaled if no feedback mechanism is present. A relationship between the surface fluctuating pressure coefficients and local A-pillar radii was established.
Recommended Content
Technical Paper | Variations in the Skid Resistance of Highway Surfaces |
Technical Paper | Zero-Offset in Transducer Output |
Journal Article | The Effect of Suspension Types and Tuning on Vehicle Durability |
Authors
- Firoz Alam - Automotive Engineering Group, Department of Mechanical and Manufacturing Engineering, RMIT University, Melbourne, AUSTRALIA
- Simon Watkins - Automotive Engineering Group, Department of Mechanical and Manufacturing Engineering, RMIT University, Melbourne, AUSTRALIA
- Gary Zimmer - Automotive Engineering Group, Department of Mechanical and Manufacturing Engineering, RMIT University, Melbourne, AUSTRALIA
- Clive Humphris - Vehicle Refinement & Aerodynamics, Product Development, Ford Motor Company of AUSTRALIA
Topic
Citation
Alam, F., Watkins, S., Zimmer, G., and Humphris, C., "Effects of Vehicle A-pillar Shape on Local Mean and Time-Varying Flow Properties," SAE Technical Paper 2001-01-1086, 2001, https://doi.org/10.4271/2001-01-1086.Also In
References
- Alam, F. “The Effects of Car A-pillar and Windshield Geometry on Local Flow and Noise” Department of Mechanical and Manufacturing Engineering RMIT University Melbourne, Australia September 2000
- Bearman, P. W. De Beer, D. Harvey, J. K. “Experimental Studies of Road Vehicle Flow Fields” AIAA Paper 89-1887 1 9 1989
- Callister, J. R. George A. R. “Measurement and Analysis of Automobile Wind Noise,” SAE Paper No. 930299 1993
- Dobrzynski, W. Soja, H. “Effect on Passenger Car Wind Noise Sources of Different A-Post Configurations” Inter-Noise-94 387 390 Yokohama August 29-31 1994 Japan
- George, A. R. “Automotive Wind Noise and its Measurement” An Information Report of the SAE Wind Noise Measurement Committee August 1996
- Hamel, T. A. Ahuja, K. K. “Wind Noise Measurements on an Automobile Side Glass with A-pillars of Different Height” AIAA Journal 1996
- Haruna, S. Nouzawa, T. Kamimoto, I. Hiroshi, S. “An Experimental Analysis and Estimation of Aerodynamic Noise Using a Production Vehicle,” SAE Paper No. 900316 1990
- Nienaltowska, E. “Separated Flow on the Car Body: Spectral and Spatial Characteristics Analysed from the Aeroacoustic Viewpoint,” International Journal of Vehicle Design 14 5-6 1993 U.K
- Popat, B. C. “Study of Flow and Noise Generation from Car A-pillars” Department of Aeronautics, Imperial College of Science, Technology and Medicine, The University of London U.K 1991
- Sadakata, O. “A Consideration of Wind Noise Reduction by Air Flow Control” 22nd FISITA No. 885115 182 189 1988
- Watanabe, M. Harita, M. “The Effects of Body Shapes on Wind Noise” SAE Paper No. 780266 1978