This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Average Value Modeling of Finite Inertia Power Systems with Harmonic Distortion
Technical Paper
2000-01-3648
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Event:
Power Systems Conference
Language:
English
Abstract
Typically, average-value models of power system components neglect harmonic information. Herein, a systematic method of including harmonic information in average-value models based on the theory of multiple reference frames is set forth. Computer simulation results show that when there is significant harmonic distortion of the ac distribution bus the models presented herein are more accurate than traditional average-value models. Furthermore, much of the computational advantage of average-value techniques over detailed modeling techniques is retained.
Authors
Citation
Alt, J. and Sudhoff, S., "Average Value Modeling of Finite Inertia Power Systems with Harmonic Distortion," SAE Technical Paper 2000-01-3648, 2000, https://doi.org/10.4271/2000-01-3648.Also In
References
- Gear C. W. Numerical Initial Value Problems in Ordinary Differential Equations Prentice Hall NJ 1971
- Middlebrook R.D. “Input Filter Considerations in Design and Application of Switching Regulators,” IEEE Proc. IASAM 1976
- Sudhoff S.D. Corzine K.A. Glover S.F. Hegner H.J. Robey H.N. “DC Link Stabilized Field Oriented Control of Electric Propulsion Systems,” IEEE Trans. on Energy Conversion 13 1 March 1998 27 33
- Glover S.F. Sudhoff S.D. “An Experimentally Validated Nonlinear Stabilizing Control for Power Electronics Based Power Systems,” 1998 SAE Transactions, Journal of Aerospace, Section 1 68 77
- Sudhoff S.D. Wasynczuk O. “Analysis and Average-Value Modeling of Line-Commutated Converter-Synchronous Machine Systems,” IEEE Trans. on Energy Conversion 8 1 March 1993 92 99
- Sudhoff S.D. “Waveform Reconstruction from the Average-Value Model of Line-Commutated Converter-Synchronous Machine Systems,” IEEE Trans. on Energy Conversion 8 3 September 1993 404 410
- Sudhoff S.D. “Analysis and Average-Value Modeling of Dual Line-Commutated Converter - 6-Phase Synchronous Machine Systems,” IEEE Trans. on Energy Conversion 8 3 September 1993 411 417
- Sudhoff S.D. Corzine K.A. Hegner H.J. Delisle D.E. “Transient and Dynamic Average-Value Modeling of Synchronous Machine Fed Load-Commutated Converters,” IEEE Trans. on Energy Conversion 11 3 September 1996 508 514
- Alt J.T. Sudhoff S.D. Ladd B.E. “Analysis and Average-Value Modeling of an Inductorless Synchronous Machine Load Commutated Converter System,” IEEE Trans. on Energy Conversion 14 1 March 1999 37 43
- Gareis G.E. Krause P.C. Mayer J.S. Sudhoff S.D. Wasynczuk O. “Modeling of Shipboard Electric Power Distribution System,” Final Technical Report for David Taylor Research Center P.C. Krause and Associates, Inc. September 1991
- Sudhoff S.D. Alt J.T. Chapman P.L. Corzine K.A. Drewniak J.L. Glover S.F. Kuhn B.T. “Analysis and Specification of Full Scale Engineering Development Integrated Power System,” Final Technical Report for Naval Sea Systems Command Purdue University and P.C. Krause and Associates, Inc. February 19 1999
- Krause P.C. “Method of Multiple Reference Frames Applied to the Analysis of Symmetrical Induction Machinery,” IEEE Trans. Power Apparatus and Systems 87 January 1968 218 227
- Sudhoff S.D. “Multiple Reference Frame Analysis of a Multistack Variable-Reluctance Stepper Motor,” IEEE Trans. on Energy Conversion 8 3 September 1993 418 424
- Sudhoff S.D. “Multiple Reference Frame Analysis of an Unsymmetrical Induction Machine,” IEEE Transactions on Energy Conversion 8 3 September 1993 425 432
- Walls T.A. Sudhoff S.D. “Analysis of a Single-Phase Induction Machine with a Shifted Auxiliary Winding,” IEEE Trans. on Energy Conversion 11 4 December 1996 681 686
- Chapman P.L. Sudhoff S.D. Whitcomb C. “Multiple Reference Frame Analysis of Non-Sinusoidal Brushless DC Drives,” IEEE Trans. on Energy Conversion 14 3 September 1999 433 439
- Krause P.C. Analysis of Electric Machinery McGraw Hill 1986
- Park R.H. “Two-Reaction Theory of Synchronous Machines - Generalized Method of Analysis - Part I,” AIEE Trans. 48 July 1929 716 727
- Thomas C.H. Discussion of “Analogue Computer Representations of Synchronous Generators in Voltage-Regulation Studies,” Trans. of AIEE (Power Apparatus and Systems) 75 December 1956 1182 1184
- Doherty R.E. Nickle C.A. “Synchronous Machines-III Torque-Angle Characteristics Under Transient Conditions,” AIEE Transactions 46 January 1927 1 8
- Pekarek S.D. “A Partitioned State Model of Synchronous Machines for Simulation and Analysis of Power/Drive Systems,” Ph.D. Thesis Purdue University December 1996
- Pekarek S.D. Wasynczuk O. Hegner H.J. “An Efficient and Accurate Model for the Simulation and Analysis of Synchronous Machine/Converter Systems,” IEEE Trans. on Energy Conversion 13 1 March 1998 42 48
- Mitchell and Gauthier Associates Advanced Continuous Simulation Language Reference Manual Version 11 Concord, MA 1995