This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
A New Engine Test for the Development of Heavy Duty Diesel Engine Oils for Engines with Exhaust Gas Recirculation: The Mack T-10 Test
Technical Paper
2000-01-1985
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
More stringent emission legislation has been a driver for changes in the design of Heavy Duty Diesel engines since the 1980s. Optimization of the combustion processes has lead to significant reductions of exhaust emission levels over the years. However, in the year 2002, diesel engines in the USA will have to meet an even more stringent set of emission requirements. Expectations are that this will force most engine builders to incorporate Exhaust Gas Recirculation (EGR).
Several studies of the impact of EGR on lubricant degradation have shown increased levels of contamination with soot particles and acidic components. Both of these could lead to changes in lubricant requirements. The industry is developing a new specification for diesel engine lubricants, PC-9, using test procedures incorporating engines with EGR.
This paper discusses the development of one of these new engine test procedures, the Mack T-10, a test primarily intended to evaluate lubricant performance in the areas of piston ring and liner wear, and bearing corrosion. A two-phase test procedure was developed in which the engine is run for 75 hours at operating conditions that promote lubricant degradation followed by 225 hours at conditions that generate liner wear. It has been demonstrated that the 300 hour test is capable of discriminating lubricants with known performance.
Recommended Content
Authors
Topic
Citation
van Dam, W., Cooper, M., Shank, G., and Richards, S., "A New Engine Test for the Development of Heavy Duty Diesel Engine Oils for Engines with Exhaust Gas Recirculation: The Mack T-10 Test," SAE Technical Paper 2000-01-1985, 2000, https://doi.org/10.4271/2000-01-1985.Also In
References
- Kagaya M. Hanada K. Kurahashi T. Ogura H. Uchida H. Takahashi Y. “Performance of Low-ash Diesel Engine Oils 1. Effect of Fuel Sulfur on IDI Diesel Engine Cleanliness and Wear” Japanese Journal of Tribology 41 11 1275 1286 1996
- Odajima M. “Trends in Diesel Exhaust Gas Control and Engineers' Expectations from Tribology” Tribology International 27 1 9 15 1994
- Ohsumi, Tatsuya Kijima Atsuko “The Effect of Exhaust Gas Recirculation System on Engine Lubrication” Jidosha Gijutsu 46 5 77 81 1992
- Kawakami T. Nakagawa E. “Lubrication Problems Caused by Diesel Engine Exhaust Gas Recirculation” Japanse Society of Lubrication Engineers 27 5 327 333 1982
- Tokura Naomi Terasaka Katsunori Yasuhara Seishi “Process through which Soot Intermixes into Lubricating Oil of a Diesel Engine with Exhaust Gas Recirculation” SAE Paper No. 820082
- Nagai Isamu Endo Hiroyasu Nakamura Hideo Yano Hisashi “Soot and Valve Train Wear in Passenger Car Diesel Engines” SAE Paper No. 831757
- Ryan Thomas W. III Owens Ed Naegeli David Doglio Jim Blyth Glenn van Dam Wim Damin Bernard Olikara Cherian Villforth Fred “Effects of Exhaust Gas Recirculation on the Degradation Rates of Lubricating Oil in a Heavy Duty Diesel Engine” SAE Paper No. 1999-01-3574
- McGeehan J.A. Franklin T.M. Bondarowicz F. Bowen T. Cave W. Cusano C. Farnsworth G, Quinn M. J. Juett R.L. Larkin D. Lee R.H. Lohuis J.R. Marn D. Nann N. Olree B. Passut C. Shank G. Zalar J. “The World's First Diesel Engine Oil Category for Use With Low-Sulfur Fuel: API CG-4” SAE Paper No. 941939
- McGeehan J.A. Franklin T.M. Bondarowicz F. Bowen T. Cave W. Wang J. Graham J.P. Fetterman G Quinn M. J. Juett R.L. Larkin D. Lee R.H. Kennedy S. Marn D. Buscher W. Jr. Olree B. Passut C. Shank G. Lawrence B. “New Diesel Engine Oil Category for 1998: API CH-4” SAE Paper No. 981371
- Heywood John B. “Combustion Engine Fundamentals” McGraw-Hill, Inc. 1988
- Data from Jan AF Thermochemical Tables 2d U.S. National Bureau of Standards June 1971
- Yu R.C. Shahed S.M. “Effects of Injection Timing and Exhaust Gas Recirculation on Emissions from a D.I. Diesel Engine” SAE Paper No. 811234
- Aoyagi Y. Kamimoto T. Matsui Y. Matsuoka S. “A Gas Sampling Study on the Formation Processes of Soot and NO in a DI Diesel Engine” SAE Paper No. 800254
- Chmela F.G. Werlberger P. “Eine Methode zur Zeitaufgeloschten Erfassung der NO x - und Russbildung im Zylinder eines Direkteinspritzenden Dieselmotors” AVL Paper 1993
- Tokura Naomi Terasaka Katsunori Yasuhara Seishi “Process through which Soot Intermixes into Lubricating Oil of a Diesel Engine with Exhaust Gas Recirculation” SAE Paper No. 820082
- McKinley Thomas L. “Modeling Sulfuric Acid Condensation in Diesel Engine EGR Coolers” SAE Paper No. 970636
- van Dam W. “The Effects of Soot Contamination and Oil Consumption on the Viscosity of a Diesel Engine Lubricant” SIA Symposium Lyon 1996
- McGeehan J.A. Rutherford J.A. Couch M.C. “Clean Diesel Exhaust But Sooty Engines: The Importance of the Crankcase Oil” SAE Paper No. 912342
- van Dam W. Willis W.W. Cooper M.W. “The Impact of Additive Chemistry and Lubricant Rheology on Wear in Heavy Duty Diesel Engines” SAE Paper No. 1999-01-3575
- Weiss E.K.J. Busenthuer B.B. Hardenberg H.O. “Diesel Fuel S and Cylinder Liner Wear of a Heavy-Duty Diesel Engine” SAE Paper No. 872148
- van Dam W. Broderick D.H. Freerks R.L. Small V.R. Willis W.W. “TBN Retention - Are We Missing the Point?” SAE Paper No. 972950