This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Instantaneous Wear Prediction of Crankshaft Bearings of a Gasoline Engine at the Beginning of Real Firing Start-Up Cycle
Journal Article
04-13-01-0006
ISSN: 1946-3952, e-ISSN: 1946-3960
Sector:
Topic:
Citation:
Chun, S., "Instantaneous Wear Prediction of Crankshaft Bearings of a Gasoline Engine at the Beginning of Real Firing Start-Up Cycle," SAE Int. J. Fuels Lubr. 13(1):99-120, 2020, https://doi.org/10.4271/04-13-01-0006.
Language:
English
References
- Chun , S.M. and Khonsari , M.M. Wear Simulation for the Journal Bearings Operating under Aligned Shaft and Steady Load during Start-Up and Coast-Down Conditions Tribology International 97 l 440 466 2016 https://doi.org/10.1016/j.triboint.2016.01.042
- Chun , S.M. 1989
- Booker , J.F. Dynamically-Loaded Journal Bearings: Mobility Method of Solution Trans. of the ASME J. of Basic Engineering 87 537 546 1965
- Booker , J.F. Dynamically-Loaded Journal Bearings: Numerical Application of the Mobility Method Trans. of the ASME J. of Lubrication Technology 93 1 168 176 1971 2 April 1971 315
- Lu , X. and Khonsari , M.M. On the Lift-Off Speed in Journal Bearings Tribol. Lett. 20 3-4 299 305 2005 https://doi.org/10.1007/s11249-005-9124-y
- Chun , S.M. and Lalas , D.P. Parametric Study of Inlet Oil Temperature and Pressure for a Half-Circumferential Grooved Journal Bearing Tribol. Trans. 35 2 213 224 1992
- Chun , S.M. Aeration Effects on the Performance of a Turbocharger Journal Bearing Tribol. Int. 41 296 306 2008 https://doi.org/10.1016/j.triboint.2007.08.006
- Ligterink , D.J. and de Gee , A.W.J. Measurements of Wear in Radial Journal Bearings Tribotest Journal 3 1 45 54 1996
- Chun , S.M. Wear Analysis of the Journal Bearings Operating under Misaligned Shaft during Motoring Start-Up and Coast-Down Conditions - Part I: Study on the Change in Oil Film Thickness at the Potential Region Involved Wear J. Korean Soc. Tribol. Lubr. Eng. 33 4 153 167 2017 https://doi.org/10.9725.kstle.2017.33.4.153
- Chun , S.M. Wear Analysis of the Journal Bearings Operating under Misaligned Shaft during Motoring Start-Up and Coast-Down Conditions - Part II: Wear Analysis of Two Journal Bearings Supporting for and Operating under Misaligned Shaft J. Korean Soc. Tribol. Lubr. Eng. 33 4 168 186 2017 https://doi.org/10.9725.kstle.2017.33.4.168
- Gudin , D. , Mian , O. , Sanders , S. Experimental Measurement and Modeling of Plain Bearing Wear in Start-Stop Applications Proceedings of Institution of Mechanical Engineers, Journal 227 5 433 446 2013 https://doi.org/10.1177/1350650112471287 39th Leeds-Lyon Symposium 2012
- Chun , S.M. Wear Analysis of Engine Bearings at Constant Shaft Angular Velocity on a Firing State - Part I: Understanding on Bearing Wear Region Tribol. Lubr. 34 3 93 106 2018 https://doi.org/10.9725.kts.2018.34.3.93
- Chun , S.M. Wear Analysis of Engine Bearings at Constant Shaft Angular Velocity on a Firing State - Part II: Calculation of the Wear Amount on Journal Bearings Tribol. Lubr. 34 4 146 159 2018 https://doi.org/10.9725.kts.2018.34.4.146
- Zhao , Y. , Maietta , D.M. , and Chang , L. An Asperity Microcontact Model Incorporating the Transition from Elastic Deformation to Fully Plastic Flow Trans. ASME J. Tribol. 122 86 93 2000
- Masjedi , M. and Khonsari , M.M. Film Thickness and Asperity Load Formulas for Line-Contact Elastohydrodynamic Lubrication with Provision for Surface Roughness Trans. ASME J. Tribol. 134 1 011503 2012 https://doi.org/10.1115/1.40005514
- McCool , J.I. Relating Profile Instrument Measurements to the Functional Performance of Rough Surfaces Trans. ASME, J. Tribol. 109 2 264 270 1987
- Kingsbury , E.P. Some Aspect of the Thermal Desorption of a Boundary Lubricant J. Appl. Phys 29 888 891 1958
- Rowe , C.N. Some Aspects of Heat of Adsorption in Function of a Boundary Lubricant ASLE Trans. 9 101 111 1966
- Holm , R. Electrical Contacts Stockholm Almqvist & Wiksell 1946
- Archard , J.F. Contact and Rubbing of Flat Surfaces J. Appl. Phys. 24 981 988 1953
- Beheshti , A. and Khonsari , M.M. Asperity Micro-Contact Models as Applied to the Deformation of Rough Line Contact Tribol. Int. 52 61 74 2012 https://doi.org/10.1016/j.triboint.2012.02.026
- Kogut , L. and Etsion , I. Elastic-Plastic Contact Analysis of a Sphere and a Rigid Flat Trans. ASME J. Applied Mechanics 69 657 662 2002
- Kogut , L. and Etsion , I. A Finite Element based Elastic-Plastic Model for the Contact of Rough Surfaces Tribol. Trans. 46 383 390 2003
- Patir , N. and Cheng , H.S. An Average Flow Model for Determining Effects of Three-Dimensional Roughness on Partial Hydrodynamic Lubrication ASME J. Lubr. Technol. 100 12 17 1978
- Queener , C.A. , Smith , T.C. , and Mitchell , W.L. Transient Wear of Machine Parts Wear 25 391 400 1965
- Chun , S.M. Analysis of Test Results for Small Dipstick-Gage-Type Engine-Oil-Deterioration-Detection Sensor J. Korean Soc. Tribol. Lubr. Eng. 30 3 156 167 2014 https://doi.org/10.9725.kstle.2014.30.3.156