Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Assessing Viscosity in Hydro-Erosive Grinding Process via Refractometry

Journal Article
04-12-03-0012
ISSN: 1946-3952, e-ISSN: 1946-3960
DOI: https://doi.org/10.4271/04-12-03-0012
Published August 22, 2019 by SAE International in United States
Assessing Viscosity in Hydro-Erosive Grinding Process via Refractometry
Sector:
Citation: Heidemann, B., Scherpinski, G., Fabris, L., Muller, M. et al., "Assessing Viscosity in Hydro-Erosive Grinding Process via Refractometry," SAE Int. J. Fuels Lubr. 12(3):183-188, 2019, https://doi.org/10.4271/04-12-03-0012.
Language: English

References

  1. Tan , K.L. , Yeo , S.H. , and Ong , C.H. Nontraditional Finishing Processes for Internal Surfaces and Passages: A Review Proceedings of the Institution of Mechanical Engineers. Part B Journal of Engineering Manufacture 231 13 2302 2316 2017 10.1177/0954405415626087
  2. Tong , H. , Li , Y. , Zhang , L. , and Qian , J. Experimental Exploration of Wire Electro Discharge Grinding for Conical Nozzle Surfaces The International Journal of Advanced Manufacturing Technology 95 1-4 1233 1241 2018 10.1007/s00170-017-1101-8
  3. Payri , R. , Salvador , F.J. , Gimeno , J. , and Zapata , L.D. Diesel Nozzle Geometry Influence on Spray Liquid-Phase Fuel Penetration in Evaporative Conditions Fuel 87 7 1165 1176 2008 10.1016/j.fuel.2007.05.058
  4. Jung , D. , Wang , W.L. , Knafl , A. , Jacobs , T.J. et al. Experimental Investigation of Abrasive Flow Machining Effects on Injector Nozzle Geometries, Engine Performance, and Emissions in a DI Diesel Engine International Journal of Automotive Technology 9 1 9 15 2008 10.1007/s12239-008-0002-0
  5. Salvador , F.J. , Carreres , M. , Jaramillo , D. , and Martínez-López , J. Analysis of the Combined Effect of Hydrogrinding Process and Inclination Angle on Hydraulic Performance of Diesel Injection Nozzles Energy Conversion and Management 105 1352 1365 2015 10.1016/j.enconman.2015.08.035
  6. Tzeng , H.J. , Yan , B.H. , Hsu , R.T. , and Lin , Y.C. Self-Modulating Abrasive Medium and Its Application to Abrasive Flow Machining for Finishing Micro Channel Surfaces The International Journal of Advanced Manufacturing Technology 32 11-12 1163 1169 2007 10.1007/s00170-006-0423-8
  7. Dong , Z. , Ya , G. , and Liu , J. Study on Machining Mechanism of High Viscoelastic Abrasive Flow Machining for Surface Finishing Proceedings of the Institution of Mechanical Engineering Part B: Journal of Engineering Manufacture 231 4 608 617 2017 10.1177/0954405415586967
  8. Coseglio , M.S.D.R. , Moreira , P.P. , Procopio , H.L. , and Pintaude , G. Analysis of the Efficiency of Hydroerosive Grinding without Renewal of Abrasive Particles J. Manuf. Sci. Eng 138 3 2016 10.1115/1.4031053
  9. Zhu , X. , Zhong , C. , and Zhe , J. Lubricating Oil Conditioning Sensors for Online Machine Health Monitoring-A Review Tribology International 109 473 484 2017 10.1016/j.triboint.2017.01.015
  10. Kanda , L.R.S. , Yamamoto , C.I. , Lopes , A.R. , Voll , F.A.P. et al. Density, Refractive Index and Viscosity as Content Monitoring Tool of Acylglycerols and Fatty Acid Methyl Esters in the Transesterification of Soybean Oil Analytical Methods 8 5619 5627 2016 10.1039/C6AY00663A
  11. Yarranton , H.W. , Okafor , J.C. , Ortiz , D.P. , and Van den Berg , F.G.A. Density and Refractive Index of Petroleum, Cuts, and Mixtures Energy Fuels 29 9 5723 5736 2015 10.1021/acs.energyfuels.5b01376
  12. Possetti , G.R.C. , Kamikawachi , R.C. , Prevedello , C.L. , Muller , M. , and Fabris , J.L. Salinity Measurement in Water Environment with a Long Period Grating Based Interferometer Meas. Sci. Technol 20 3 2009 10.1088/0957-0233/20/3/034003
  13. Eki , A. , Narita , K. , and Watanabe , K. Refractive Index Measurement in Sucrose Solution and Beverage Using Surface Plasmon Resonance Sensor Based on Hetero-Core Structured Fiber Optic Procedia Chemistry 20 115 117 2016 10.1016/j.proche.2016.07.020
  14. Montemayor , R. Precision and Relative Bias of Automatic and Manual Refractometers Using ASTM D 1218 at 20°C Journal of Testing and Evaluation 30 1 89 91 2002 10.1520/JTE12293J. ISSN 0090-3973
  15. Díaz , R.M. , Bernardo , M.I. , Fernández , A.M. , and Folgueras , M.B. Prediction of the Viscosity of Lubricating Oil Blends at Any Temperature Fuel 75 5 574 578 1996 10.1016/0016-2361(95)00289-8
  16. Pintaude , G. , Grabarski , M.I. , and Moreira , P.P. Maintenance of Hydroerosive Grinding Efficiency Based on Particle Size Distribution of Abrasive Fluid J. Braz. Soc. Mech. Sci. Eng 41 2019 10.1007/s40430-019-1594-1

Cited By