Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

A Multiscale Cylinder Bore Honing Pattern Lubrication Model for Improved Engine Friction

Journal Article
04-12-03-0010
ISSN: 1946-3952, e-ISSN: 1946-3960
DOI: https://doi.org/10.4271/04-12-03-0010
Published July 02, 2019 by SAE International in United States
A Multiscale Cylinder Bore Honing Pattern Lubrication Model for Improved Engine Friction
Citation: Sen, O. and Akalin, O., "A Multiscale Cylinder Bore Honing Pattern Lubrication Model for Improved Engine Friction," SAE Int. J. Fuels Lubr. 12(3):155-166, 2019, https://doi.org/10.4271/04-12-03-0010.
Language: English

References

  1. Richardson , D. Review of Power Cylinder Friction for Diesel Engines Journal of Engineering for Gas Turbines and Power 122 4 506 519 2000 10.1115/1.1290592
  2. Dimkovski , Z. , Cabanettes , F. , Lofgren , H. et al. Optimization of Cylinder Liner Surface Finish by Slide Honing 2012 Proceedings of the Institution of Mechanical Engineers, Part B: Engineering Manufacture 226 4 575 584 2012 10.1177/0954405410396154
  3. Hoen , T. , Schmid , J. , and Stumpf , W. Less Wear and Oil Consumption through Helical Slide Honing of Engines by Deutz MTZ 70 4 46 51 2009 10.1007/BF03226945
  4. Tomanik , E. Modelling the Hydrodynamic Support of Cylinder Bore and Piston Rings with Laser Textured Surfaces Tribology International 59 90 96 2013 10.1016/j.triboint.2012.01.016
  5. Ergen , O.R. , Kurnaz , G. , Sydemir , N.G. , and Akalin , O. Reduced Oil Consumption by Laser Surface Texturing on Cylinders SAE International Journal of Commercial Vehicles 1 446 453 2009 10.4271/2008-01-2688
  6. Patir , N. and Cheng , H.S. An Average Flow Model for Determining Effects of Three-Dimensional Roughness on Partial Hydrodynamic Lubrication Journal of Lubrication Technology 100 1 12 17 1978 10.1115/1.3453103
  7. Patir , N. and Cheng , H.S. Application of Average Flow Model to Lubrication between Rough Sliding Surfaces Journal of Lubrication Technology 101 2 220 230 1979 10.1115/1.3453329
  8. Greenwood , I.A. and Tripp , J.H. The Contact of Two Nominally Flat Surfaces Proceedings of the Institution of Mechanical Engineers 185 1 625 633 1971 10.1243/PIME_PROC_1970_185_069_02
  9. Rohde , S.M. A Mixed Friction Model for Dynamically Loaded Contacts with Application to Piston Ring Lubrication Winter Annual Meeting of ASME Chicago, IL. 1980
  10. Hu , Y. , Cheng , H.S. et al. Numerical Simulation of Piston Ring in Mixed Lubrication-A Non-Axisymmetrical Analysis Journal of Tribology 116 3 470 478 1994 10.1115/1.2928867
  11. Akalin , O. and Newaz , G.M. Piston Ring-Cylinder Bore Friction Modeling in Mixed Lubrication Regime: Part I- Analytical Results Journal of Tribology 123 1 211 218 2001 10.1115/1.1286337
  12. Michail , S.K. and Barber , G.C. The Effects of Roughness on Piston Ring Lubrication. Part-2: The Relationship Between Cylinder Wall Surface Topography and Oil Film Thickness Tribology Transactions 38 1 173 177 1995 10.1080/10402009508983394
  13. Spencer , A. , Almqvist , A. , and Larsson , R. A Semi-Deterministic Texture-Roughness Model of the Piston Ring-Cylinder Contact Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 225 6 325 333 2011 10.1177/1350650110396279
  14. Leighton , M. , Rahmani , R. , and Rahnejat , H. Surface-Specific Flow Factors for Prediction of Cross-Hatched Surfaces Surface Topography: Metrology and Properties 4 2 025002 2016 10.1088/2051-672X/4/2/025002
  15. Jocsak , J. , Li , Y. , Tian , T. , and Wong , V. Modeling and Optimizing Honing Texture for Reduced Friction in Internal Combustion Engines SAE Technical Paper 2006-01-0647 2006 10.4271/2006-01-0647
  16. Chen , H. and Tian , T. The Influences of Cylinder Liner Honing Patterns and Oil Control Ring Design Parameters on the Interaction between the Twinland Oil Control Ring and the Cylinder Liner in Internal Combustion Engines SAE Technical Paper 2008-01-1614 2008 10.4271/2008-01-1614
  17. Mezghani , S. , Demirci , I. , Zahouani , H. , and El Mansori , M. The Effect of Groove Texture Patterns on Piston-Ring Pack Friction Precision Engineering 36 2 210 217 2012 10.1016/j.precisioneng.2011.09.008
  18. Grabon , W. , Pawlus , P. et al. Effects of Honed Cylinder Liner Surface Texture on Tribological Properties of Piston Ring-Liner Assembly in Short Time Tests Tribology International 113 137 148 2017 10.1016/j.triboint.2016.11.025
  19. Wu , C. and Zheng , L. An Average Reynolds Equation for Partial Film Lubrication with a Contact Factor Journal of Tribology 111 1 188 191 1989 10.1115/1.3261872
  20. Wahiduzzaman , S. , Keribar , R. , and Dursunkaya , Z.A. Model for Evaporative Consumption of Lubricating Oil in Reciprocating Engines SAE Technical Paper 922202 1992 10.4271/922202

Cited By