This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Pilot Injection and Thermal Nitrogen Oxides: A Numerical and Experimental Study

Journal Article
03-13-04-0031
ISSN: 1946-3936, e-ISSN: 1946-3944
Published July 02, 2020 by SAE International in United States
Pilot Injection and Thermal Nitrogen Oxides: A Numerical and Experimental Study
Sector:
Citation: Najar, I., Stengel, B., Buchholz, B., and Hassel, E., "Pilot Injection and Thermal Nitrogen Oxides: A Numerical and Experimental Study," SAE Int. J. Engines 13(4):473-486, 2020, https://doi.org/10.4271/03-13-04-0031.
Language: English

References

  1. Lavoie , G.A. , Heywood , J.B. , and Keck , J.C. Experimental and Theoretical Study of Nitric Oxide Formation in Internal Combustion Engines Combust. Sci. Tech. 1 4 313 326 1970
  2. Gambhir , H. , Barman , J. , and Patchappalam , K. Experimental Investigation on the Effect of Pilot and Post Injection on Engine Performance and Emissions SAE Technical Paper 2018-28-0015 2018 https://doi.org/10.4271/2018-28-0015
  3. Shangar Ramani , V. , Muthusamy , A. , and Bhachchu , G. Reduction of Diesel Engine Combustion Noise through Various Injection Strategies SAE Technical Paper 2019-26-0211 2019 https://doi.org/10.4271/2019-26-0211
  4. Shangar Ramani , V. , Bhachchu , G. , and Muthusamy , A. Reduction of Emissions and Noise Variations by Adjustment of Fuel Injection Quantity SAE Technical Paper 2019-28-0002 2019 https://doi.org/10.4271/2019-28-0002
  5. Yoon , H. , Yeom , K. , and Bae , C. The Effects of Pilot Injection on Combustion in Dimethyl-ether (DME) Direct Injection Compression Ignition Engine SAE Technical Paper 2007-24-0118 2007 https://doi.org/10.4271/2007-24-0118
  6. Li , T. , Ogawa , H. , Moriwaki , R. , and Suzuki , T. Effects of EGR and Pilot Injection on Characteristics of Combustion and Emissions of Diesel Engines with Low Ignitability Fuel SAE Technical Paper 2012-01-0853 2012 https://doi.org/10.4271/2012-01-0853
  7. Ogren , R. and Kong , S. Ultra-High Fuel Injection Pressure with Massive EGR to Enable Simultaneous Reduction of Soot and NOx Emissions SAE Technical Paper 2018-01-0227 2018 https://doi.org/10.4271/2018-01-0227
  8. Badami , M. , Millo , F. , and D’Amato , D. Experimental Investigation on Soot and NOx Formation in a DI Common Rail Diesel Engine with Pilot Injection SAE Technical Paper 2001-01-0657 2001 https://doi.org/10.4271/2001-01-0657
  9. Badami , M. , Mallamo , F. , Millo , F. , and Rossi , E. Influence of Multiple Injection Strategies on Emissions, Combustion Noise and BSFC of a DI Common Rail Diesel Engine SAE Technical Paper 2002-01-0503 2002 https://doi.org/10.4271/2002-01-0503
  10. Cheng , X. , Chen , L. , Yan , F. , Hong , G. et al. Investigations of Split Injection Strategies for the Improvement of Combustion and Soot Emissions Characteristics Based On the Two-Color Method in a Heavy-Duty Diesel Engine SAE Technical Paper 2013-01-2523 2013 https://doi.org/10.4271/2013-01-2523
  11. Lee , J. , Jeon , J. , Park , J. , and Bae , C. Effect of Multiple Injection Strategies on Emission and Combustion Characteristics in a Single Cylinder Direct-Injection Optical Engine SAE Technical Paper 2009-01-1354 2009 https://doi.org/10.4271/2009-01-1354
  12. Flynn , P. , Durrett , R. , Hunter , G. , zur Loye , A , et al. Diesel Combustion: An Integrated View Combining Laser Diagnostics, Chemical Kinetics, And Empirical Validation SAE Technical Paper 1999-01-0509 1999 https://doi.org/10.4271/1999-01-0509
  13. Dec , J. A Conceptual Model of DI Diesel Combustion Based on Laser-Sheet Imaging SAE Technical Paper 970873 1997 https://doi.org/10.4271/970873
  14. Jorques Moreno , C. , Stenlaas , O. , and Tunestal , P. Investigation of Small Pilot Combustion in a Heavy-Duty Diesel Engine SAE Int. J. Engines 10 3 1193 1203 2017 https://doi.org/10.4271/2017-01-0718
  15. Jorques Moreno , C. , Stenlaas , O. , and Tunestal , P. Influence of Small Pilot on Main Injection in a Heavy-Duty Diesel Engine SAE Technical Paper 2017-01-0708 2017 https://doi.org/10.4271/2017-01-0708
  16. Okude , K. , Mori , K. , Shiino , S. , Yamada , K. et al. Effects of Multiple Injections on Diesel Emission and Combustion Characteristics SAE Technical Paper 2007-01-4178 2007 https://doi.org/10.4271/2007-01-4178
  17. Jung , D. , Jeong , J. , Lim , O. , Pyo , Y. et al. Influence of Pilot Injection on Combustion Characteristics and Emissions in a DI Diesel Engine Fueled with Diesel and DME SAE Technical Paper 2011-01-1958 2011 https://doi.org/10.4271/2011-01-1958
  18. Zhang , J. , Zhang , F. , Tian , G. , Xu , H. et al. The Particle Emission Characteristics of a Light Duty Diesel Engine by Using Different Pilot Injections SAE Technical Paper 2010-01-1959 2010 https://doi.org/10.4271/2010-01-1959
  19. Ishikawa , N. , Uekusa , T. , Nakada , T. , and Hariyoshi , R. DI Diesel Emission Control by Optimized Fuel Injection SAE Technical Paper 2004-01-0117 2004 https://doi.org/10.4271/2004-01-0117
  20. Dimitriou , P. , Wang , W. , Peng , J. , Cheng , L. et al. Analysis of Diesel Engine In-Cylinder Air-Fuel Mixing with Homogeneity Factor: Combined Effects of Pilot Injection Strategies and Air Motion SAE Int. J. Engines 7 4 2045 2060 2014 https://doi.org/10.4271/2014-01-9052
  21. Wang , C. , Wang , T. , Sun , K. , Lu , Z. et al. Effects of EGR and Injection Strategies on the Performance and Emissions of a Two-Stroke Marine Diesel Engine SAE Technical Paper 2017-01-2249 2017 https://doi.org/10.4271/2017-01-2249
  22. Liu , Y. and Reitz , R. Optimizing HSDI Diesel Combustion and Emissions Using Multiple Injection Strategies SAE Technical Paper 2005-01-0212 2005 https://doi.org/10.4271/2005-01-0212
  23. Dukowicz , J.K. A Particle-Fluid Numerical Model for Liquid Sprays J. Comp. Physics 35 229 253 1980
  24. Hanjalic , K. , Popovac , M. , and Hadziabodic , M. A robust near-wall elliptic-relaxation eddy-viscosity turbulence model for CFD Int. J. Heat and Fluid Flow 25 1047 1051 2004
  25. Von Berg , E. , Edelbauer , W. , Alajbegovic , A. , Tatschl , R. et al. Coupled Simulations of Nozzle Flow, Primary Fuel Jet Breakup, and Spray Formation Journal of Engineering for Gas Turbines and Power 127 4 897 907 2005
  26. TM
  27. Reitz , R.D. Modeling Atomization Processes in High-Pressure Vaporizing Spray Atomization and Spray Technology 3 4 309 337 1987 0266-3481
  28. O’Rourke , P.J. Statistical Properties and Numerical Implementation of a Model for Droplet Dispersion in Turbulent Gas Journal of Computational Physics 83 2 345 360 1989
  29. Abramzon , B. and Sirignano , W. A. Droplet Vaporization Model for Spray Combustion Calculations AIAA 26thAerospace Sciences Meeting Reno, NV 1988
  30. TM
  31. Tschöke , H. , Mollenhauer , K. , and Maier , R. Hand-buch dieselmotoren Berlin Springer-Verlag 2017
  32. Merker , G.P. and Teichmann , R. Grundlagen Verbrennungsmotoren: Funktionsweise und alternative Antriebs-systeme Verbrennung, Messtechnik und Simulation Berlin Springer-Verlag 2018
  33. Reif , K. Dieselmotor-Management Wiesbaden Vieweg+ Teubner Verlag 2012
  34. Pucilowski , M. , Jangi , M. , Shamun , S. , Tuner , M. et al. The Effect of Injection Pressure on the NOx Emission Rates in a Heavy-Duty DICI Engine Running on Methanol SAE Technical Paper 2017-01-2194 2017 https://doi.org/10.4271/2017-01-2194
  35. Perini , F. , Busch , S. , Kurtz , E. , Warey , A. et al. Limitations of Sector Mesh Geometry and Initial Conditions to Model Flow and Mixture Formation in Direct-Injection Diesel Engines SAE Technical Paper 2019-01-0204 2019 https://doi.org/10.4271/2019-01-0204
  36. Tow , T. , Pierpont , A. , and Reitz , R.D. Reducing Particulates and NOx Emissions by Using Multiple Injections in a Heavy Duty D.I. Diesel Engine SAE Technical Paper 940897 1994 https://doi.org/10.4271/940897
  37. Barro , C , Tschanz , F , Obrecht , P , Boulouchos , K Influence of Post Injection Parameters on Soot Formation and Oxidation in a Common-Rail-Diesel Engine Using Multi-Color-Pyrometry ICEF2012-92075, ASME Internal Combustion Engine Division Fall Technical Conference Vancouver, BC 2012

Cited By