Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Influence of Inflow Boundary Conditions on High-Pressure Fuel Injection: Assessment Based on Large Eddy Simulation Approach

Journal Article
03-13-02-0009
ISSN: 1946-3936, e-ISSN: 1946-3944
DOI: https://doi.org/10.4271/03-13-02-0009
Published November 19, 2019 by SAE International in United States
Influence of Inflow Boundary Conditions on High-Pressure Fuel Injection: Assessment Based on Large Eddy Simulation Approach
Sector:
Citation: Žilić, A., Pachler, K., and Cristofaro, M., "Influence of Inflow Boundary Conditions on High-Pressure Fuel Injection: Assessment Based on Large Eddy Simulation Approach," SAE Int. J. Engines 13(2):123-134, 2020, https://doi.org/10.4271/03-13-02-0009.
Language: English

References

  1. Mayer , W. , Telaar , J. , Branam , R. , Schneider , G. , and Hussong , J. Raman Measurements of Cryogenic Injection at Supercritical Pressure Heat Mass Transfer 39 709 719 2003 10.1007/s00231-002-0315-x
  2. Oschwald , M. , Smith , J. , Branam , R. , Hussong , J. et al. Injection of Fluids into Supercritical Environments Combust. Sci. Technol. 178 49 100 2006 10.1080/00102200500292464
  3. Srivastava , S. and Jaberi , F. Large Eddy Simulations of Complex Multicomponent Diesel Fuels in High Temperature and Pressure Turbulent Flows Int. J. of Heat and Mass Transfer 104 819 834 2017 10.1016/j.ijheatmasstransfer.2016.07.011
  4. Kahila , H. , Wehrfritz , A. , Kaario , O. , Masouleh , M.G. et al. Large-Eddy Simulation on the Influence of Injection Pressure in Reacting Spray A Combustion and Flame 191 142 159 2018 10.1016/j.combustflame.2018.01.004
  5. Yue , Z. and Reitz , R.D. An Equilibrium Phase Spray Model for High-Pressure Fuel Injection and Engine Combustion Simulations Int. J. of Engine Research 20 203 215 2017 10.1177/1468087417744144
  6. Crua , C. , Manin , J. , and Pickett , L.M. On the Transcritical Mixing of Fuels at Diesel Engine Conditions Fuel 208 535 548 2017 10.1016/j.fuel.2017.06.091
  7. Wensing , M. , Vogel , T. , and Götz , G. Transition of Diesel Spray to a Supercritical State under Engine Conditions Int. J. of Engine Research 17 108 119 2015 10.1177/1468087415604281
  8. Banuti , D.T. Crossing the Widom-Line-Supercritical Pseudo-Boiling Journal of Supercritical Fluids 98 12 16 2015 10.1016/j.supflu.2014.12.019
  9. Oefelein , J. , Lacaze , G. , Dahms , R. , Ruiz , A. , and Misdariis , A. Effects of Real-Fluid Thermodynamics on High-Pressure Fuel Injection Processes SAE Int. J. Engines 7 3 1125 1136 2014 10.4271/2014-01-1429
  10. Lacaze , G. , Misdariis , A. , Ruiz , A. , and Oefelein , J.C. Analysis of High-Pressure Diesel Fuel Injection Processes Using LES with Real-Fluid Thermodynamics and Transport Proceedings of the Combustion Institute 35 1603 1611 2015 10.1016/j.proci.2014.06.072
  11. Matheis , J. and Hickel , S. Multi-Component Vapor-Liquid Equilibrium Model for LES of High-Pressure Fuel Injection and Application to ECN Spray A International Journal of Multiphase Flow 99 294 311 2018 10.1016/j.ijmultiphaseflow.2017.11.001
  12. Ma , P.C. , Wu , H. , Jaravel , T. , Bravo , L. , and Ihme , M. Large-Eddy Simulations of Transcritical Injection and Auto-Ignition Using Diffuse-Interface Method and Finite-Rate Chemistry Proceedings of the Combustion Institute 37 3303 3310 2019 10.1016/j.proci.2018.05.063
  13. Knudsen , E. , Doran , E.M. , Mittal , V. , Meng , J. , and Spurlock , W. Compressible Eulerian Needle-to-Target Large Eddy Simulations of a Diesel Fuel Injector Proceedings of the Combustion Institute 36 2459 2466 2017 10.1016/j.proci.2016.08.016
  14. Peng , D.Y. and Robinson , D.P. A New Two-Constant Equation of State Ind. Eng. Chem. Fundam. 15 59 64 1976 10.1026/l160057a011
  15. Sander , W. and Weigand , B. Direct Numerical Simulation and Analysis of Instability Enhancing Parameters in Liquid Sheets at Moderate Reynolds Numbers Physics of Fluids 20 053301 2008 10.1063/1.2909661
  16. Cristofaro , M. , Edelbauer , W. , Koukouvinis , P. , and Gavaises , M. Large Eddy Simulation of the Internal Injector Flow during Pilot Injection The 10th International Symposium on Cavitation (CAV 2018) Baltimore, MD 2018
  17. Battistoni , M. , Xue , Q. , Som , S. , and Pomraning , E. Effect of Off-Axis Needle Motion on Internal Nozzle and Near Exit Flow in a Multi-Hole Diesel Injector SAE Int. J. Fuels Lubr. 7 1 167 182 2014 10.4271/2014-01-1426
  18. Torelli , R. , Matusik , K. , Nelli , K. , Kastengren , A. et al. Evaluation of Shot-to-Shot In-Nozzle Flow Variations in a Heavy-Duty Diesel Injector Using Real Nozzle Geometry SAE Int. J. Fuels Lubr. 11 4 379 295 2018 10.4271/2018-01-0303
  19. Kobayashi , H. The Subgrid-Scale Models Based on Coherent Structures for Rotating Homogeneous Turbulence and Turbulent Channel Flow Physics of Fluids 17 045104 2005 10.1063/1.1874212
  20. AVL List GmbH 2017
  21. Patankar , S.V. and Spalding , D.B. A Calculation Procedure for Heat, Mass and Momentum Transfer in Three-Dimensional Parabolic Flows International Journal of Heat and Mass Transfer 15 1787 1806 1972 10.1016/0017-9310(72)90054-3
  22. Pickett , L.M. and Bruneaux , G. 2011 http://www.sandia.gov/ECN
  23. Pickett , L.M. , Genzale , C.L. , and Manin , J. Uncertainty Quantification for Liquid Penetration of Evaporating Sprays at Diesel-Like Conditions Atomization and Sprays 25 425 452 2015 10.1615/AtomizSpr.2015010618
  24. Stotz , I. , Lamanna , G. , and Weigand , B. Fluid Disintegration Studies in a Specialised Shock Tube Progress in Propulsion Physics 2 165 206 2011 10.1051/eucass/201102165

Cited By