Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Modelling of a Variable Displacement Lubricating Pump with Air Dissolution Dynamics

Journal Article
03-11-02-0008
ISSN: 1946-3936, e-ISSN: 1946-3944
DOI: https://doi.org/10.4271/03-11-02-0008
Published April 18, 2018 by SAE International in United States
Modelling of a Variable Displacement Lubricating Pump with Air Dissolution Dynamics
Sector:
Citation: Rundo, M., Squarcini, R., and Furno, F., "Modelling of a Variable Displacement Lubricating Pump with Air Dissolution Dynamics," SAE Int. J. Engines 11(2):111-126, 2018, https://doi.org/10.4271/03-11-02-0008.
Language: English

References

  1. Rundo , M. and Nervegna , N. Lubrication Pumps for Internal Combustion Engines: A Review Int. J. Fluid Power 16 2 59 74 2015 10.1080/14399776.2015.1050935
  2. Mancò , S. , Nervegna , N. , Rundo , M. , and Armenio , G. Displacement vs Flow Control in IC Engines Lubricating Pumps SAE Technical Paper 2004-01-1602 2004 10.4271/2004-01-1602
  3. Staley , D. , Pryor , B. , and Gilgenbach , K. Adaptation of a Variable Displacement Vane Pump to Engine Lube Oil Applications SAE Technical Paper 2007-01-1567 2007 10.4271/2007-01-1567
  4. Rundo , M. and Nervegna , N. Geometry Assessment of Variable Displacement Vane Pumps J. Dyn. Syst., Meas., Control 129 4 446 455 2007 10.1115/1.2718245
  5. Rundo , M. and Squarcini , R. Experimental Procedure for Measuring the Energy Consumption of IC Engine Lubricating Pumps during a NEDC Driving Cycle SAE Int. J. Engines 2 1 1690 1700 2009 10.4271/2009-01-1919
  6. Rundo , M. Piloted Displacement Controls for ICE Lubricating Vane Pumps SAE Int. J. Fuels Lubr. 2 2 176 184 2010 10.4271/2009-01-2758
  7. Burke , R. , Brace , C. , Lewis , A. , Stark , R. et al. On Engine Study of Thermal and Performance Impacts of a Variable Displacement Oil Pump ASME 2012 Internal Combustion Engine Division Spring Technical Conference Torino, Italy May 6-9, 2012 10.1115/ICES2012-81044
  8. Rundo , M. and Squarcini , R. Discrete Pressure Controls in IC Engine Lubricating Pumps ASME International Mechanical Engineering Congress & Exposition Denver, CO Nov. 11-17, 2011 10.1115/IMECE2011-62525
  9. Mancò , S. , Nervegna , N. , Rundo , M. , and Armenio , G. Modelling and Simulation of Variable Displacement Vane Pumps for IC Engine Lubrication SAE Technical Paper 2004-01-1601 2004 10.4271/2004-01-1601
  10. Cantore , G. , Paltrinieri , F. , Tosetti , F. , and Milani , M. Lumped Parameters Numerical Simulation of a Variable Displacement Vane Pump for High Speed ICE Lubrication SAE Technical Paper 2008-01-2445 2008 10.4271/2008-01-2445
  11. Barbarelli , S. , Bova , S. , and Piccione , R. Zero-Dimensional Model and Pressure Data Analysis of a Variable-Displacement Lubricating Vane Pump SAE Technical Paper 2009-01-1859 2009 10.4271/2009-01-1859
  12. Bianchini , A. , Ferrara , G. , Ferrari , L. , Paltrinieri , F. et al. Design and Optimization of a Variable Displacement Vane Pump for High Performance IC Engine Lubrication: Part 1 - Experimental Analysis of the Circumferential Pressure Distribution with Dynamic Pressure Sensors SAE Technical Paper 2009-01-1045 2009 10.4271/2009-01-1045
  13. Geist , B. and Resh , W. Dynamic Modeling of a Variable Displacement Vane Pump within an Engine Oil Circuit ASME 2011 Internal Combustion Engine Division Fall Technical Conference Morgantown, WV Oct. 2-5, 2011 10.1115/ICEF2011-60039
  14. Truong , D. , Ahn , K. , Trung , N. , and Lee , J. Performance Analysis of a Variable-Displacement Vane-Type Oil Pump for Engine Lubrication Using a Complete Mathematical Model Proc. IMechE Part D 227 10 1414 1430 2013 10.1177/0954407013491896
  15. Harrison , J. , Aihara , R. , Eshraghi , M. , and Dmitrieva , I. Modeling Engine Oil Variable Displacement Vane Pumps in 1D to Predict Performance, Pulsations, and Friction SAE Technical Paper 2014-01-1086 2014 10.4271/2014-01-1086
  16. Jiang , Y. and Perng , C. An Efficient 3D Transient Computational Model for Vane Oil Pump and Gerotor Oil Pump Simulations SAE Technical Paper 970841 1997 10.4271/970841
  17. Ding , H. , Visser , F. , Jiang , Y. and Furmanczyk , M. Demonstration and Validation of a 3D CFD Simulation Tool Predicting Pump Performance and Cavitation for Industrial Applications ASME Fluids Engineering Division Summer Meeting Vail, CO Aug. 2-6, 2009
  18. Wang , D. , Ding , H. , Jiang , Y. , and Xiang , X. Numerical Modeling of Vane Oil Pump with Variable Displacement SAE Technical Paper 2012-01-0637 2012 10.4271/2012-01-0637
  19. Sullivan , P. and Sehmby , M. Internal Force Analysis of a Variable Displacement Vane Pump SAE Technical Paper 2012-01-0409 2012 10.4271/2012-01-0409
  20. Frosina , E. , Senatore , A. , Buono , D. , and Olivetti , M. A Tridimensional CFD Analysis of the Oil Pump of an High Performance Engine SAE Technical Paper 2014-01-1712 2014 10.4271/2014-01-1712
  21. Frosina , E. , Senatore , A. , Buono , D. et al. Vane Pump Power Split Transmission: Three dimensional computational fluid dynamics modelling ASME/BATH Symposium of Fluid Power and Motion Control Chicago, IL Oct. 12-14, 2015 10.1115/FPMC2015-9518
  22. Schweitzer , P.H. and Szebehely , V.G. Gas Evolution in Liquids and Cavitation J. Appl. Phys. 21 12 1218 1224 1950 10.1063/1.1699579
  23. Jiang , D. , Li , S. , Edge , K.A. , and Zeng , W. Modeling and Simulation of Low Pressure Oil-Hydraulic Pipeline Transients Computers & Fluids 67 79 86 2012 10.1016/j.compfluid.2012.07.005
  24. Borghi , M. , Milani , M. , Paltrinieri , F. and Zardin , B. The Influence of Cavitation and Aeration on Gear Pumps and Motors Meshing Volumes Pressures ASME International Mechanical Engineering Congress and Exposition Chicago, IL Nov. 5-10, 2006 10.1115/IMECE2006-13735
  25. Zhou , J. , Vacca , A. , and Casoli , P. A Novel Approach for Predicting the Operation of External Gear Pumps under Cavitating Conditions Simul. Model. Pract. Theory 45 35 49 2014 10.1016/j.simpat.2014.03.009
  26. Shah , Y.G. , Vacca , A. , Dabiri , S. and Frosina , E. A Fast Lumped Parameter Approach for the Prediction of Both Aeration and Cavitation in Gerotor Pumps Meccanica 53 175 191 2018 10.1007/s11012-017-0725-y
  27. del Campo , D. , Castilla , R. , Raush , G.A. , Gamez Montero , P.J. et al. Numerical Analysis of External Gear Pumps Including Cavitation J. Fluid. Eng. 134 081105 2012 10.1115/1.4007106
  28. Singhal , A.K. , Athavale , M.M. , Li , H. , and Jiang , Y. Mathematical Basis and Validation of the Full Cavitation Model J. Fluid. Eng. 124 617 624 2002 10.1115/1.1486223
  29. Rundo , M. and Squarcini , R. Modelling and Simulation of Brake Booster Vacuum Pumps SAE Int. J. Commer. Veh. 6 1 236 248 2013 10.4271/2013-01-9016
  30. Merritt , H.E. Hydraulic Control Systems New York John Wiley & Sons, Inc. 1967 34 978-0-471-59617-2
  31. Ivantysyn , J. and Ivantysynova , M. Hydrostatic Pumps and Motors, Principles, Designs, Performance, Modelling, Analysis, Control and Testing New Delhi Akademia Books International 2002 355 81-85522-16-2
  32. Inaguma , Y. and Hibi , A. Reduction of Friction Torque in Vane Pump by Smoothing Cam Ring Surface Proc. IMechE Part C 221 527 534 2007 10.1243/0954406jmes225
  33. Furno , F. and Blind , V. Effects of Air Dissolution Dynamics on the Behaviour of Positive-Displacement Vane Pumps: A Simulation Approach 10th International Fluid Power Conference Dresda, Germany Mar. 8-10, 2016
  34. Siemens PLM 2017
  35. Delta Services Industriels Lubricant Aeration http://www.deltabeam.net/en/product/lubricant-aeration 2017
  36. Schrank , K. and Murrenhoff , H. Investigation of Different Methods to Measure the Entrained Air Content in Hydraulic Oils ASME/BATH Symposium on Fluid Power & Motion Control Bath, United Kingdom Sept. 10-12, 2014 10.1115/FPMC2014-7823
  37. Rundo , M. and Altare , G. Lumped Parameter and Three-Dimensional CFD Simulation of a Variable Displacement Vane Pump for Engine Lubrication ASME Fluids Engineering Division Summer Meeting Waikoloa, HI July 30-Aug. 3, 2017 10.1115/FEDSM2017-69124
  38. Kim , S. and Murrenhoff , H. Measurement of Effective Bulk Modulus for Hydraulic Oil at Low Pressure J. Fluids Eng. 134 2 021201 2012 10.1115/1.4005672
  39. Altare , G. and Rundo , M. Computational Fluid Dynamics Analysis of Gerotor Lubricating Pumps at High Speed: Geometric Features Influencing the Filling Capability J. Fluids Eng. 138 11 111101 2016 10.1115/1.4033675
  40. Rundo , M. On the Dynamics of Pressure Relief Valves with External Pilot for ICE Lubrication ASME International Mechanical Engineering Congress and Exposition Montreal, Quebec, Canada Nov. 14-20, 2014 10.1115/IMECE2014-37973

Cited By