Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Process Regulations and Mechanism of WEDM of Combustor Material

Journal Article
01-12-01-0004
ISSN: 1946-3855, e-ISSN: 1946-3901
DOI: https://doi.org/10.4271/01-12-01-0004
Published June 07, 2019 by SAE International in United States
Process Regulations and Mechanism of WEDM of Combustor Material
Sector:
Citation: Singh, B. and Misra, J., "Process Regulations and Mechanism of WEDM of Combustor Material," SAE Int. J. Aerosp. 12(1):77-96, 2019, https://doi.org/10.4271/01-12-01-0004.
Language: English

References

  1. Schilke , P.W. 2004
  2. Jameson , E. Electrical Discharge Machining 2001
  3. Fleming , B. The EDM How-to Book 2005
  4. Singh , R.P. , Singhal , S. , Singh , R.P. , and Singhal , S. Rotary Ultrasonic Machining: A Review Rotary Ultrasonic Machining : A Review Materials and Manufacturing Process 31 14 1795 1824 2017
  5. Liao , Y.S. , Huang , J.T. , and Su , H.C. A Study on the Machining-Parameters Optimization of Wire Electrical Discharge Machining Journal of Material Processing Technology 71 3 487 493 1997
  6. Tosun , N. , Cogun , C. , and Inan , A. The Effect of Cutting Parameters on Workpiece Surface Roughness in Wire EDM Machining Science and Technology 7 2 209 219 2013
  7. Singh , T. , Misra , J.P. , and Singh , B. Experimental Investigation of Influence of Process Parameters on MRR during WEDM of Al6063 alloy Materials Today: Proceedings 4 2 2242 2247 2017
  8. Kumar , A. , Kumar , V. , and Kumar , J. Semi-Empirical Model on MRR and Overcut in WEDM Process of Pure Titanium Using Multi-Objective Desirability Approach Journal of Brazilian Society of Mechanical Science and Engineering 37 2 689 721 2015
  9. Goswami , A. and Kumar , J. Trim Cut Machining and Surface Integrity Analysis of Nimonic 80A Alloy Using Wire Cut EDM Engineering Science and Technology: An International Journal 20 175 186 2016
  10. Mandal , A. , Dixit , A.R. , Das , A.K. , and Mandal , N. Modeling and Optimization of Machining Nimonic C-263 Super Alloy Using Multi-Cut Strategy in WEDM Materials and Manufacturing Process 6914 2015
  11. Shandilya , P. , Jain , P.K. , and Misra , J.P. Experimental Investigation During Wire Electric Discharge Cutting of SiCp/6061 Aluminum Metal Matrix Composite Annals of DAAAM Proceedings International DAAAM Symposium 21 1091 1092 2010
  12. Manjaiah , M. , Narendranath , S. , Basavarajappa , S. , and Gaitonde , V.N. Wire Electric Discharge Machining Characteristics of Titanium Nickel Shape Memory Alloy Transactions of Nonferrous Metals Society of China 24 10 3201 3209 2014
  13. Narendranath , S. , Manjaiah , M. , Basavarajappa , S. , and Gaitonde , V. Experimental Investigations on Performance Characteristics in Wire Electro Discharge Machining of Ti50Ni42.4Cu7.6 Shape Memory Alloy Proceedings of the Institution of Mechanical Engineers: Part B Journal of Engineering Manufacture 227 8 1180 1187 2013
  14. Hatami , S. , Shahabi-Navid , M. , and Nyborg , L. Surface Preparation of Powder Metallurgical Tool Steels by Means of Wire Electrical Discharge Machining Metallurgical and Materials Transactions A 43 9 3215 3226 2012
  15. Gupta , K. and Jain , N.K. Comparative Study of Wire-Edm and Hobbing for Manufacturing High-Quality Miniature Gears Materials and Manufacturing Processes 29 1470 1476 2014
  16. Gupta , K. and Jain , N.K. Near-Net Shape Manufacturing of Miniature Spur Gears by Wire Spark Erosion Machining Springer 2016
  17. Bisaria , H. and Shandilya , P. Experimental Studies on Electrical Discharge Wire Cutting of Ni-Rich Niti Shape Memory Alloy Materials and Manufacturing Processes 6914 2017
  18. Kumar , A. , Kumar , V. , and Kumar , J. Investigation of Machining Characterization for Wire Wear Ratio & MRR on Pure Titanium in WEDM Process Through Response Surface Methodology Proceedings of the IMechE Part B 227 7 972 992 2017
  19. Nain , S.S. , Sihag , P. , and Luthra , S. Performance Evaluation of Fuzzy-Logic and BP-ANN Methods for WEDM of Aeronautics Super Alloy Methods X 5 890 908 2018
  20. Myers , R.H. , Montgomery , D.C. , and Anderson-cook , C.M. Response Surface Methodology 3 Wiley 2009 1 1247
  21. Verma , S. , Gupta , M. , and Misra , J.P. Performance Evaluation of Friction Stir Welding Using Machine Learning Approaches Methods X 5 1048 1058 2018
  22. Misra , J.P. , Jain , P.K. , Dwivedi , D.K. , and Mehta , N.K. Study of Time Dependent Behaviour of ECH of Bevel Gears Procedia Engineering 64 1259 1266 2013
  23. Singh , B. and Misra , J.P. Surface Finish Analysis of Wire Electric Discharge Machined Specimens by RSM and ANN Modeling Measurement 137 225 237 2019
  24. Singh , B. and Misra , J.P. Empirical Modeling of Average Cutting Speed during WEDM of Hastelloy C22 MATEC Web of Conferences 2018 249
  25. Singh , B. and Misra , J.P. Empirical Modeling of Average Cutting Speed during WEDM of Gas Turbine Alloy MATEC Web of Conferences 2018 221
  26. Singh B. and Misra J.P. Empirical Modelling of Wear Ratio during WEDM of Nimonic 263 Materials Today: Proceedings 2018 23612 23618
  27. Singh , B. and Misra , J.P. A Critical Review of Wire Electric Discharge Machining DAAAM International Scientific Book 249 266 2016
  28. Singh , B. and Misra , J.P. Modelling of Surface Characteristics of Wire-Electro Discharge Machined Combustor Material Specimens Material Research Express 6 5 056549 2019
  29. Singh B. and Misra J.P. Machining Performance and Surface Integrity Analysis of Combustor Material During WEDM Advances in Mechanical Engineering 6 2019

Cited By