This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Computer Simulation of an LHR DI Diesel Engine
Annotation ability available
Sector:
Language:
English
Abstract
The effect on engine performance of insulating combustion chambers was simulated for a turbocharged direct injection diesel engine. We developed a low heat rejection (LHR) diesel cycle simulation. It includes a gas flow model, a heat transfer model, and a two zone combustion model. In the heat transfer model, convective and radiation heat transfer between the gas and walls was computed, taking into account the combustion chamber surface temperature swings. In the combustion model's combustion zone, the temperature and the chemical equilibrium compositions were determined. They were used to calculate the NO formation rate by assuming a modified Zeldvich mechanism. The combustion zone temperature was also used to estimate the radiation heat transfer. Simulations were performed of various combustion chamber surface materials and various LHR levels. The factors which affect thermal efficiency and exhaust emissions were deduced and their influences discussed.
Recommended Content
Authors
Topic
Citation
Miyairi, Y., "Computer Simulation of an LHR DI Diesel Engine," SAE Technical Paper 880187, 1988, https://doi.org/10.4271/880187.Also In
References
- Brizik Walter Kamo Roy “TACOM/Cummins Adiabatic Engine Program,” SAE Paper 830314
- Alkidas A.C. “The Influence of Partial Suppression of Heat Rejection on the Performance and Emissions of a Divided-chamber Diesel Engine” SAE Paper 860309
- Kamo, Roy Woods M. Mori, M. Yaraada T. “Thermal Barrier Coating for Diesel Engine Piston,” ASME Paper 80-DGP-14
- Suziki T. Tujita M. Mori Y. Suzuki Takashi “An Observation of Combustion Phenomenon on Heat Insulated Turbo-Charged and Inter-Cooled D.I.Diesel Engines,” SAE Paper 861187
- Tasaka, H. Matsuoka, S. Trans. JSME vol. 40 335 1974–7
- Annand, W, J, D, “Heat Transfer In the Cylinders of Reciprocating Internal Combustion Engines,” PIME vol. 177 36 1963
- Annand, W,J,D Ma, T.H. “Instantaneous Heat Transfer Rates to the Cylinder Head Surface of a Small Compression-Ignition Engine,” PIME vol. 185–72/71
- Sitkei G. Ramaiah G.V. “A Rational Approach for Calculation of Heat Transfer in Diesel Engines,” SAE Paper 720027
- Hiroyasu H. Kadota T. “Fuel Droplet Size Distribution in Diesel Combustion Chamber,” SAE Paper 740715
- Flynn P. Mizusawa Masatake Uyehara O.A. Myyers P.S. “An Experimental Determination of Instantaneous Potential Radiant Heat Transfer Within an Operating Diesel Engine,” SAE paper 720022
- Karaimoto T. Aoyagi Y. Matsui Y. Matsuoka Shin “The Effect of Some Engine Variables on Measured Rates of Air Entrainment and Heat Release in a DI Diesel Engine,” SAE Paper 800253
- Kamimoto T. Matsuoka S. Matsui Y. Aoyagi Y. “The Measurement of Flame Temperature and Thermodynamic Analysis of Combustion Process in a Direct Injection Diesel Engine,” IMechE, C96/75
- Wakuri, Yutaro Fujii, Masaru Amitani, Tatsuo Tsuneya, Reijiro “Studies on the Penetration of Fuel Spray of Diesel Engine,” Trans. JISME vol. 25 156 820
- Dent J.C. “Here Is an Easy Way to Calculate Diesel Fuel Spray Penetration,” Automotive Engineering vol. 79 5
- Khan I.M. Greeves G. Wang C.H. “Factors Affecting Smoke and Gageous Emissions from Direct Injection Engines and a Method of Calculation,” SAE Paper 730169
- Fenimore C.P. “Formation of Nitric Oxide in Premixed Hydrcarbon Flames,” 13 th Symposium (int.)on Comb. 1971 373
- Newhall H.K. Shahed S.M. “Kinetics of Nitric Oxide Formation in High-Pressure Flames,” 13 th Symp.(Int.)on Comb. 1971 381
- Campbell, Ashley S. Thermodynamic Analysis of Combustion Engines John Wiley & Sons,Inc. USA
- JISME Data Book Thermophysical Properties of Fluids
- Tovell J.F. “The Reduction of Heat Losses to the Diesel Engine Cooling System,” SAE Paper 830316
- Assanis Dennis N. Heywood John B. “Development and Use of a Computer Simulation of the Turbocompounded Diesel System for Engine Performance and Component Heat Transfer Studies,” SAE Paper 860329
- Morel, Thomas Keribar, Rifat Blumberg, Paul N. Fort, Edward F. “Examination of Key Issues in Low Heat Rejection Engines,” SAE Paper 860316