This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Effects of Clamping Force on the Operating Behavior of PEM Fuel Cell
Technical Paper
2018-01-1718
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
Proton exchange membrane (PEM) fuel cell is widely recognized as an outstanding portable power plant and expected to be possibly commercialization in the near future. As is well known, mechanical stresses implemented on the bipolar plates during the assembly procedure should have prominent influences on mass and heat transfer behavior inside the cell, as well as the resultant performance. In this study, an analytical model is proposed to comprehensively investigate the influence of clamping force on the mass transport, electrochemical properties and overall cell output capability of a PEM fuel cell. The results indicate that proper clamping force not only benefits the gas leakage prevention but also increases the contact area between the neighboring components to decrease the contact ohmic resistance. However, deformation always takes place simultaneously, changing the local physical structures of the cell components, which possibly leads to the decrement of porosity and permeability of the gas diffusion layer (GDL) and catalyst layer (CL), hinders the gas species and liquid water transport in GDL, and also decreases the cross-sectional flow area in the channel. The combined effect of the aforementioned factors finally contributes to the cell performance fluctuation. Moreover, although the contact resistance decreases with increasing stresses, more significant mass transfer losses, e.g. lower membrane water content and larger gradient in liquid saturation, results in more serious concentration voltage losses and weaker proton conductivity in the membrane, further impairing the cell voltage output. Therefore, cell performance should be optimized by the balancing among the transport properties and the contact resistance involved in the fuel cell. By using this analytical model, optimal cell design parameters and clamping pressure exerted on the fuel cell can be quickly predicted accordingly. Proper discussions are carried out and suggestions are proposed.
Recommended Content
Authors
Topic
Citation
Chen, R., Qin, Y., Du, Q., and Peng, J., "Effects of Clamping Force on the Operating Behavior of PEM Fuel Cell," SAE Technical Paper 2018-01-1718, 2018, https://doi.org/10.4271/2018-01-1718.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 |
Also In
References
- Hans , R. , Panik , F. , and Reuss , H. 1-D+1-D PEM Fuel Cell Stack Model for Advanced Hardware-in-the-Loop Applications SAE Int. J. Alt. Power. 5 1 1 12 2016 10.4271/2015-01-1779
- Wendeker , M. , Malek , A. , Czarnigowski , J. , Taccani , R. et al. Adaptive Airflow Control of the PEM Fuel Cell System SAE Technical Paper 2007-01-2012 2007 10.4271/2007-01-2012
- Qiu , D. , Yi , P. , and Peng , L. Assembly Design of Proton Exchange Membrane Fuel Cell Stack with Stamped Metallic Bipolar Plates Int. J. Hydrogen Energy 40 35 11559 11568 2015 10.1016/j.ijhydene.2015.03.064
- Lee , W.K. , Ho , C.H. , and Zee , J.W.V. The Effects of Compression and Gas Diffusion Layers on the Performance of a PEM Fuel Cell J. Power Sources 84 1 45 51 1999
- Selamet , O.F. and Ergoktas , M.S. Effects of Bolt Torque and Contact Resistance on the Performance of the Polymer Electrolyte Membrane Electrolyzers J. Power Sources 281 103 113 2015 10.1016/j.jpowsour.2015.01.162
- Xu , G. , Lamanna , J.M. , and Clement , J.T. Direct Measurement of through-Plane Thermal Conductivity of Partially Saturated Fuel Cell Diffusion Media J. Power Sources 256 3 212 219 2014 10.1016/j.jpowsour.2014.01.015
- Wen , C.Y. , Lin , Y.S. , and Lu , C.H. Experimental Study of Clamping Effects on the Performances of a Single Proton Exchange Membrane Fuel Cell and a 10-Cell Stack J. Power Sources 192 2 475 485 2009 10.1016/j.jpowsour.2009.03.058
- Nitta , I. , Himanen , O. , and Mikkola , M. Contact Resistance between Gas Diffusion Layer and Catalyst Layer of PEM Fuel Cell Electrochemistry Communications 10 1 47 51 2007 10.1016/j.elecom.2007.10.029
- Chang , W.R. , Hwang , J.J. , and Weng , F.B. Effect of Clamping Pressure on the Performance of a PEM Fuel Cell J. Power Sources 166 1 149 154 2007 10.1016/j.jpowsour.2007.01.015
- Ihonen , J. , Mikkola , M. , and Lindbergh , G. Flooding of Gas Diffusion Backing in PEFCs J. Electrochemical Society 151 8 A1152 A1161 2004 10.1149/1.1763138
- Cha , D. , Ahn , J.H. , and Kim , H.S. Effects of Clamping Force on the Water Transport and Performance of a PEM (Proton Electrolyte Membrane) Fuel Cell with Relative Humidity and Current Density Energy 93 1338 1344 2015 10.1016/j.energy.2015.10.045
- Zhou , P. , Wu , C.W. , and Ma , G.J. Contact Resistance Prediction and Structure Optimization of Bipolar Plates J. Power Sources 159 2 1115 1122 2005 10.1016/j.jpowsour.2005.12.080
- Chien , C.H. , Hu , Y.L. , and Su , T.H. Effects of Bolt Pre-Loading Variations on Performance of GDL in a Bolted PEMFC by 3-D FEM Analysis Energy 113 1174 1187 2016 10.1016/j.energy.2016.07.075
- Norouzifard , V. and Bahrami , M. Deformation of PEM Fuel Cell Gas Diffusion Layers under Compressive Loading: An Analytical Approach J. Power Sources 264 264 92 99 2016 10.1016/j.energy.2016.07.075
- Su , Z.Y. , Liu , C.T. , and Chang , H.P. A Numerical Investigation of the Effects of Compression Force on PEM Fuel Cell Performance J. Power Sources 183 1 182 192 2008 10.1016/j.jpowsour.2008.04.060
- Chippar , P. , Kyeongmin , O. , and Kang , K. A Numerical Investigation of the Effects of GDL Compression and Intrusion in Polymer Electrolyte Fuel Cells PEFCs Int. J. Hydrogen Energy 37 7 6326 6338 2011 10.1016/j.ijhydene.2011.04.154
- Taymaz , I. and Benli , M. Numerical Study of Assembly Pressure Effect on the Performance of Proton Exchange Membrane Fuel Cell Energy 35 5 2134 2140 2010 10.1016/j.energy.2010.01.032
- Zhou , Y. , Lin , G. , and Shih , A.J. Assembly Pressure and Membrane Swelling in PEM Fuel Cells J. Power Sources 192 2 544 551 2009 10.1016/j.jpowsour.2009.01.085
- Zhou , Y. , Lin , G. , and Shih , A.J. Multiphysics Modeling of Assembly Pressure Effects on Proton Exchange Membrane Fuel Cell Performance J. Fuel Cell Science & Technology 4 6 2291 2295 2009 10.1115/1.3081426
- Zhang , G. , Jiao , K. , and Wang , R. 3D Simulation of Water and Thermal Management for High Performance PEM Fuel Cell SAE Technical Paper 2018-01-1309 2018 10.4271/2018-01-1309
- Luo , Y. , Jiao , K. , and Jia , B. Elucidating the Constant Power, Current and Voltage Cold Start Modes of Proton Exchange Membrane Fuel Cell Int. J. Heat & Mass Transfer 77 4 489 500 2014 10.1016/j.ijheatmasstransfer.2014.05.050
- Ye , Q. and Nguyen , T.V. Three-Dimensional Simulation of Liquid Water Distribution in a PEMFC with Experimentally Measured Capillary Functions J. Electrochemical Society 154 12 2007 10.1149/1.2783775
- Golpaygan , A. and Ashgriz , N. Effects of Oxidant Fluid Properties on the Mobility of Water Droplets in the Channels of PEM Fuel Cell Int. J. Energy Research 29 12 1027 1040 2010 10.1016/s0140-6701(06)81905-3
- Guvelioglu , G.H. and Stenger , H.G. Computational Fluid Dynamics Modeling of Polymer Electrolyte Membrane Fuel Cells J Power Sources 147 1 95 106 2005 10.1016/j.jpowsour.2005.01.011
- Motupally , S. Diffusion of Water in Nafion 115 Membranes J. Electrochemistry Society 147 9 3171 3177 2000 10.1149/1.1393879
- Dhanorkar , S. and Kamra , A.K. Effect of Coagulation on the Particle Charge Distribution and Air Conductivity J. Geophysical Research Atmospheres 106 D11 12055 12065 2001 10.1029/2000jd900709
- Springer , T.E. , Zawodzinski , T.A. , and Gottesfeld , S. Modeling Water Content Effects in Polymer Electrolyte Fuel Cells J. Electrochemistry Society 138 2334 1991
- Meng , H. A Three-Dimensional PEM Fuel Cell Model with Consistent Treatment of Water Transport in MEA J. Power Sources 162 1 426 435 2006 10.1016/j.jpowsour.2006.07.022
- Tomadakis , M.M. Viscous Permeability of Random Fiber Structures: Comparison of Electrical and Diffusional Estimates with Experimental and Analytical Results J. Composite Materials 39 2 163 188 2005 10.1177/0021998305046438
- Lin , P. , Zhou , P. , and Wu , C.W. A High Efficient Assembly Technique for Large Proton Exchange Membrane Fuel Cell Stacks: Part II. Applications J. Power Sources 195 5 1383 1392 2010 10.1016/j.jpowsour.2009.09.038
- Ismail , M.S. , Damjanovic , T. , and Ingham , D.B. Effect of Polytetrafluoroethylene-Treatment and Microporous Layer-Coating on the Electrical Conductivity of Gas Diffusion Layers Used in Proton Exchange Membrane Fuel Cells J. Power Sources 195 9 2700 2708 2009 10.1016/j.jpowsour.2009.11.069